Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: Problem Waking Up!




  1. #11
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Problem Waking Up!

    Well...........just when I was beginning to think I was cured, it happened again. Trying to wake up, the computer gets into this restart loop where it keeps trying to start up, fails, tries again, fails, and so on. So, what should I try now? Do you think it's time to flash the bios?
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  2. #12
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem Waking Up!

    Yes, please update to the latest BIOS, this should have been your first step because older BIOSes are generally problematic for S3 Sleep so F10 may have the fix you need and F9 may not.

    Be sure to read this in case you are unsure how to safely flash
    http://forums.tweaktown.com/f69/bios...h-guide-27576/

  3. #13
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Problem Waking Up!

    Okay........I have successfully (I think) updated my BIOS to F10. Everything seems to be running correctly, so I will let this cook for a few days and get back with you on the results. Thanks for your help!
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  4. #14
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem Waking Up!

    Alright then! Good luck with the cooking!

    If you test S3 and it fails, be sure to test at default speeds as well.

  5. #15
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Problem Waking Up!

    Wow, am I getting errors! MemTest started recording hardware errors immediately. Orthos did too. Here's what it said:
    1:Execution halted.

    Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 3838 Time: 15
    CPU: 3000MHz FSB: 333MHz [333MHz x 9.0 est.]
    4/11/2010 1:24 PM
    Launching 2 threads...
    1:Using CPU #0
    2:Using CPU #1
    1:Beginning a continuous self-test to check your computer.
    1:Press Stop to end this test.
    2:Beginning a continuous self-test to check your computer.
    2:Press Stop to end this test.
    1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
    2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
    1:FATAL ERROR: Resulting sum was 1.191695999485952e+017, expected: 1.232811803504031e+017
    1:Hardware failure detected, consult stress.txt file.
    1:Torture Test ran 0 minutes 5 seconds - 1 errors, 0 warnings.
    1:Execution halted.

    2:Torture Test ran 0 minutes 11 seconds - 0 errors, 0 warnings.
    2:Execution halted.

    Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 3838 Time: 15
    CPU: 1980MHz FSB: 333MHz [396MHz x 5.0 est.]
    4/11/2010 1:26 PM
    Launching 2 threads...
    1:Using CPU #0
    2:Using CPU #1
    2:Beginning a continuous self-test to check your computer.
    2:Press Stop to end this test.
    1:Beginning a continuous self-test to check your computer.
    1:Press Stop to end this test.
    2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
    1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
    1:FATAL ERROR: Resulting sum was -1.759831036184026e+016, expected: 1.066637943471492e+016
    1:Hardware failure detected, consult stress.txt file.
    1:Torture Test ran 0 minutes 5 seconds - 1 errors, 0 warnings.
    1:Execution halted.

    2:Torture Test ran 0 minutes 5 seconds - 0 errors, 0 warnings.
    2:Execution halted.

    Does this give you any information about the problem? These things have tested okay in the recent past.
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  6. #16
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Problem Waking Up!

    Here's what Prime95 said:
    [Apr 11 13:30] Worker starting
    [Apr 11 13:30] Setting affinity to run worker on logical CPU #0
    [Apr 11 13:30] Beginning a continuous self-test to check your computer.
    [Apr 11 13:30] Please read stress.txt. Choose Test/Stop to end this test.
    [Apr 11 13:30] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
    [Apr 11 13:30] FATAL ERROR: Resulting sum was -1.440291867474302e+152, expected: 1739677451372209
    [Apr 11 13:30] Hardware failure detected, consult stress.txt file.
    [Apr 11 13:30] Torture Test completed 0 tests in 0 minutes - 1 errors, 0 warnings.
    [Apr 11 13:30] Worker stopped.
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  7. #17
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Problem Waking Up!

    Wow! Now it's getting worse. I reverted to "optimized setup" in the BIOS. I still get error messages, and I just got a BSOD! Here is what Windows said about the BSOD:
    Problem signature:

    Problem Event Name: BlueScreen
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 1033

    Additional information about the problem:
    BCCode: 3b
    BCP1: 00000000C0000005
    BCP2: FFFFF960001328CC
    BCP3: FFFFF88009C68870
    BCP4: 0000000000000000
    OS Version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    Files that help describe the problem:
    C:\Windows\Minidump\041110-21668-01.dmp
    C:\Users\friendlyphil\AppData\Local\Temp\WER-29437-0.sysdata.x

    The BSOD called it a "system_service_exception" and listed win32k.sys, along with a bunch of numbers. Waddaya think?
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem Waking Up!

    You should start with optimized, did you not?

    Auto setting is not always best, often not at all, and especially not when trying to troubleshot issues of any type especially S3 sleep.

    Can you please fill out a template with your current full settings, link in my signature for temp.

    Please also give us a link to your exact Crucial's or post a screen shot of CPU-z open to the SPD tab

  9. #19
    Join Date
    Jul 2009
    Posts
    63

    Default Re: Problem Waking Up!

    Very unusual! Here's what happened: After all the above errors (and I did use optimized defaults immediately after flashing BIOS), I replaced the current memory sticks with some different ones I had. The machine would not boot. I got the BSOD only. After putting the old memory back in, in a different order, the machine is now fine. No problems. It has passed every stress test with no errors or alerts, and I ran Memtest all night with no errors. I have removed those memory sticks before. They were not installed loose or in any way incorrectly. But now, everything seems fine. I am using mostly optimized defaults. Here they are:
    Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 9x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 3.00 Ghz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [disabled]
    CPU Host Frequency (Mhz) ............: 333Mhz
    PCI Express Frequency (Mhz) .........:auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< ops
    MCH Clock Skew (ps)...................: <<< ops


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: auto
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: auto
    Memory Frequency (Mhz) ..............: 1066
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................5 auto
    tRCD .........................................5 auto
    tRP'...........................................5 auto
    tRAS..........................................15 auto

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................4 auto
    tWTR..........................................4 auto
    tWR............................................6 auto
    tRFC...........................................72 auto
    tRTP...........................................4 auto
    Command Rate (CMD) ....................:0 auto

    Driving Strength Profiles
    Driving Strength ............................

    Channel A
    Static tRead Value.........................:6 auto
    tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Channel B
    Static tRead Value.........................:6
    tRD Phase0 Adjustment...................:0 Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:0 Auto
    tRD Phase2 Adjustment .................:0 Auto
    tRD Phase3 Adjustment..................:0 Auto
    Trd2rd(Different Rank)....................:8 Auto
    Twr2wr(Different Rank)...................:8 Auto
    Twr2rd(Different Rank)...................:7 Auto
    Trd2wr(Same/Diff Rank)..................:9 Auto
    Dimm1 Clock Skew Control...............:Auto
    Dimm2 Clock Skew Control...............:Auto

    Motherboard Voltage Control

    CPU
    CPU Vcore….……….........................:1.250 Auto if not overclocking, if you are overclocking please do find and set your own voltages

    CPU Termination…..... 1.200V*.......: auto << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore. Auto is fine if not overclocking

    CPU PLL…………………....1.500V*.......: auto << If overclocking Please set to stock, Auto overvolts this way to much. Optimal range for overclock would be 1.5-1.65. Auto is fine if not overclocking

    CPU Referen.…………....0.760V*.......: auto <<< .64% Of Vtt (Termination above) Auto Will set this correctly


    MCH/ICH
    MCH Core…………….....1.100V...........: auto<<
    MCH Reference….…….0.760V...........; auto <<< Leave
    MCH/DRAM Ref.…......0.900V...........:auto <<< Leave
    ICH I/O……………….....1.500V............: auto<<< Leave
    ICH Core…………...……1.100V............: auto <<< Leave

    DRAM
    DRAM Voltage ……....1.800V............: 2.0
    DRAM Termination .…0.900V............: auto<<< Leave
    Channel A Reference 0.900V............: auto<<< Leave
    Channel B Reference 0.900V............:auto <<< Leave

    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [enabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [enabled]
    Virtualization Technology................: [enabled] Enabled if you use Vmware/Virtual PC

    Integrated Peripherals
    Legacy USB Storage Detect ..............[enabled] *Note* Must be enabled to flash from USB

    Here is my memory information:
    4 X 1GB, Ballistix 240-pin DIMM, DDR2 PC2-8500 memory module
    BL12864AA106A
    • Module Size: 1GB
    • Package: Ballistix 240-pin DIMM
    • Feature: DDR2 PC2-8500
    • Specs: DDR2 PC2-8500 • 5-5-5-15 • Unbuffered • NON-ECC • DDR2-1066 • 2.0V • 128Meg x 64 •

    I am at a loss for an explanation. What do you think?
    Friendlyphil

    System Info:
    Gigabyte GA-P45T-ES3G Rev. 1.3
    Intel Core2 Duo E8400 LGA775 3GHz
    Gigabyte ATI Radeon HD 4670
    Aero Cool i-curve box
    2-WD 640GB HD's
    Kingston 2 x 4GB DDR3 1333MHz
    Windows 7 Pro 64-bit
    Bios V. F1

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Problem Waking Up!

    Ahh, so all is well now?

    If so, what are you plans? I mean overclock or not? If not, or if so, I can help you dial in settings for better memory performance if you like.

    SO as of now, did you test S3 sleep yet?

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •