Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Coolermaster Hyper 212 plus question.




  1. #1

    Default Coolermaster Hyper 212 plus question.

    I am putting together a new build with a hyper 212 plus and some corsair vengeance memory that goes right beside it. The problem is that the hyper 212 extends slightly into the 1st slot of memory. The vengeance memory is way too high with the heatsink on it. What can I do? Can I put the fan on the cooler to pull instead of push or will I lose some cooling? Do I need to get different memory? Can I take of the heatsink on the first stick? Thanks.
    Windows 7 Professional
    (2)-ASUS VS248H-P Black 24" Monitor
    CORSAIR Hydro Series H60 (CWCH60) Liquid CPU Cooler
    ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    Kingston Hyper X Blu 16GB
    Intel Xeon E3-1245 V2 Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Server Processor
    High Current Pro HCP-750 750W TX12V v2.3 / EPS12V v2.92 SLI Certified CrossFire Certified 80 PLUS GOLD
    SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive
    3 -2TB Western Digital Black HDD
    Rosewill RDCR-11003 74-in-1 USB3.0 3.5 Internal Card Reader
    1 Asus Blu Ray Burner
    1 Plextor DVD Burner

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Coolermaster Hyper 212 plus question.

    I see four possible options:
    1. Replace the 120mm fan with a 92mm fan - normal fan thickness is 25mm and if you mount the 92mm fan flush with the top of the cpu heatsink, the bottom of the 92mm fan will be about 28mm higher than the 120mm fan's bottom edge.
    2. Mount the 212+ heatsink horizontally, so that the air will be pushed toward the exhaust fan at the top rear portion of your case. Check my cpu heatsink/fan setup in MSI N460GTX Hawk (1GB) Overclocking Results, posts #81 and #83. My Balder cpu heatsink is about 2mm thinner than the Hyper 212+. I don't think that this option will work, as the narrow edge of my heatsink almost touches my 61mm tall memory in my P35-DS3L system.
    3. Use a down draft style cpu cooling solution that will not have clearance problems with your memory.
    4. Carefully modify the height of one or more of your memory modules' heat spreaders.

    Replacing your current memory with a different model with a "standard" heat spreader is an option, as memory modules with plain heat spreaders are about 30 mm tall. Removing the tall heat spreader from a memory module is NOT recommended.

    Check out the 92mm PWM Arctic Cooling F model fan. It retails for about $10 (USD). Don't even think of buying from them directly, the freight charges to ship from Asia are prohibitive. It is an excellent fan.
    edit: I just noticed that you have a P35 motherboard, so option #2 might work.
    I thought that you had a P67 motherboard.

    Hyper 212+ dimensions:
    Coolermaster Hyper 212 plus question.-hyper212_plus_2d_drawing-jpg
    Last edited by profJim; 11-09-2011 at 01:27 PM. Reason: correction for my DUH moment
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3

    Default Re: Coolermaster Hyper 212 plus question.

    I now have an H40 liquid cooler from Corsair installed in my computer. I want to know what someone would do in the case I am going to explain.
    The H40 recommends it as an air intake so I have put this as an air intake in the back. My top fan on my P183 V3 is taking air out. My front two though are intake again. That is 3 in and 1 out. Should I switch my top fan in the front of my case and put it as an out fan? This would give me 2+2. Any suggestions would be great if you know what you are talking about.:)
    Windows 7 Professional
    (2)-ASUS VS248H-P Black 24" Monitor
    CORSAIR Hydro Series H60 (CWCH60) Liquid CPU Cooler
    ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    Kingston Hyper X Blu 16GB
    Intel Xeon E3-1245 V2 Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Server Processor
    High Current Pro HCP-750 750W TX12V v2.3 / EPS12V v2.92 SLI Certified CrossFire Certified 80 PLUS GOLD
    SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive
    3 -2TB Western Digital Black HDD
    Rosewill RDCR-11003 74-in-1 USB3.0 3.5 Internal Card Reader
    1 Asus Blu Ray Burner
    1 Plextor DVD Burner

  4. #4
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Coolermaster Hyper 212 plus question.

    If your psu is the Silencer 750 Quad, you also have a psu fan (22-55 CFM) that draws interior case air from the front of the psu and exhausts air out the back of the psu. I would count the psu fan as 1/2 of a fan exhausting air because the psu fan is probably seldom running at full speed. Right now, your computer case has positive air flow, meaning that more air is drawn into your case than can be exhausted by the fans.

    Corsair probably wants the H40 fan to draw cooler room air through the radiator for maximum cpu cooling. You also need to consider hdd, motherboard and gpu cooling and the goal is to provide optimal cooling for all components. The best setup is where internal case air turbulence is minimized.

    A web search using: positive vs negative pressure computer case will provide some guidance, but not any definitive answers. You can configure SpeedFan to monitor and log all temperatures. Your best bet is to run an extended test with your system using high loads for several hours with your current setup. Then you can repeat the test where you change the fan orientation with one or more fans. My preference is to have top mounted fans exhausting air out of the case to minimize drawing dust into the computer case. I've had good luck with used dryer softener sheets on the air intake side of case fans to help lower dust intake.
    I like to think that I know what I'm talking about.

    Let us know which fan setup works best.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #5

    Default Re: Coolermaster Hyper 212 plus question.

    I actually have an OCZ fatality 750 for this new build.
    Last edited by ingeborgdot; 11-15-2011 at 07:41 AM.
    Windows 7 Professional
    (2)-ASUS VS248H-P Black 24" Monitor
    CORSAIR Hydro Series H60 (CWCH60) Liquid CPU Cooler
    ASRock Z77 Extreme4 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
    Kingston Hyper X Blu 16GB
    Intel Xeon E3-1245 V2 Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Server Processor
    High Current Pro HCP-750 750W TX12V v2.3 / EPS12V v2.92 SLI Certified CrossFire Certified 80 PLUS GOLD
    SAMSUNG 830 Series MZ-7PC256B/WW 2.5" 256GB SATA III MLC Internal Solid State Drive
    3 -2TB Western Digital Black HDD
    Rosewill RDCR-11003 74-in-1 USB3.0 3.5 Internal Card Reader
    1 Asus Blu Ray Burner
    1 Plextor DVD Burner

  6. #6
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: Coolermaster Hyper 212 plus question.

    If your OCZ 750W Fatal1ty psu has the fan drawing air from the bottom of the computer case, then the psu fan has no effect on computer case airflow. I never install a bottom mounted psu with the fan facing up, as it's too easy to accidentally drop a small screw into the psu. Opening a psu case automatically voids your warranty.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •