Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: DDR Issues w/Asus A7N8X DX




  1. #11
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default

    If I recall, OCZ generally runs their memory at 2.8v instead of the default 2.5v rating. Just something to think about. :D
    Old age and treachery will overcome youth and skill
    My Toys

  2. #12
    Join Date
    Jan 2003
    Posts
    968

    Default

    Yeah, it was .15 volts. Seems to be working fine, but not a whole lot of difference in benchmarks so far, other than I can OC the processor more now...:D I have it at 2.1GHZ and it's stable. FSB is 150X14=2100. I'm not sure where to go from here.:?:
    <img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
    Revenge is just a respawn away....Pagosa LAN Parties

  3. #13
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Ya could try 12-12.5 x 166MHz and go from there. :devil win

  4. #14
    Join Date
    Jan 2003
    Posts
    968

    Default

    :D ;) :p
    I now have an Athlon XP 2600+...:thumb:
    I left the memory at 200MHz for now....how much higher ya think that will go?
    <img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
    Revenge is just a respawn away....Pagosa LAN Parties

  5. #15
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Not bad at all m8. :thumb:

    What settin's are ya runnin' now? :?:

  6. #16
    Join Date
    Jan 2003
    Posts
    968

    Default

    My settings are (Increased after my last post):
    FSB: 172MHzX12.5=2150MHz
    RAM:206MHz
    VCore:1.75volts
    GPU:300MHz
    AGP RAM:561MHz
    <img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
    Revenge is just a respawn away....Pagosa LAN Parties

  7. #17
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    I'd be very happy with that as pushin' harder is likely to require ya to start droppin' memory timings which maybe counter productive at this stage but also I'd see how it goes like that for a few days.

  8. #18
    Join Date
    Jan 2003
    Posts
    968

    Default

    Those were incomplete specs....
    (I just bumped this up again :devil: )
    CPU ext freq:175MHzX12.5=2188MHz
    Memory freq:120%=210MHz
    SDRAM: 6-3-3-2T (The OCZ is rated for 1T but my BIOS won't allow it lower than 2T)
    VCore: 1.75MHz
    Temps after 3DMark2001SE:
    System:24C
    CPU:33C
    :D
    <img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
    Revenge is just a respawn away....Pagosa LAN Parties

  9. #19
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Would it hurt ya to say that I've run XMS3500 with timings of 2-2-2-5-1T @210MHz? :?:

    But then XMS3200 at that speed is doin' 2-2-2-6-2T. ;)

    Though EPoX do have a better overclocker's BIOS. :D

  10. #20
    Join Date
    Jan 2003
    Posts
    968

    Default

    OK, OK....you're the King
    I'm gonna let it alone for a while now and crank out some SETI units for the team. I'll let ya know how she does. Thanks once again for helping me get past the RAM issues. :cheers:
    <img src="http://www.statgfx.com/statgfx/folding/?&username=Wordbiker&border=0,255,0&tr ans=yes&template=fah_original&.jpg" alt="www.Statgfx.com" />
    Revenge is just a respawn away....Pagosa LAN Parties

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •