Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 1 of 1

Thread: KHX11000D3LLK2/2G x2 + Vista x64 = no CAS7

  1. #1
    Join Date
    Jan 2005
    Qld, Australia

    Default KHX11000D3LLK2/2G x2 + Vista x64 = no CAS7

    Greetings Kingston Tech Support

    I have a question that I wish to pose.

    I won a KHX11000D3LLK2/2G kit here a while back (thanks once again) and recently I have upgraded to Vista Ultimate x64 so I purchased another KHX11000D3LLK2/2G kit.

    While I had the original kit I could boot to 7-7-7-20-1N without any problems, now that I have two kits installed I can not boot at CAS7 at all, the best I have been able to achieve is 8-7-7-20-1N.

    Do you have any suggestions I could try or any information that may be of assistance?

    The rest of my system is detailed in my signature.



    Hello, anyone at home????

    EDIT 2: On the off chance that someone does happen to look in this forum in the near future I have another question related to my problem above.

    What is the maximum "safe" limit for overvolting these modules?

    0.1v?, 0.15v?, 0.2v?

    At what voltage would it be considered harmful for these modules?

    Last edited by ANZAC_ELITE; 09-30-2008 at 12:47 PM.
    [email protected] 4.25GHz~Thermalright Ultra 120 eXtreme~Foxconn Blackops~4GB Kingston HyperX DDR3 1625 at 1700MHz (8-8-8-24-2N) 1.916v~Asus 9800GTX~18x Pioneer 212 DL SATA DVD-RW~320GB WD SATAII~Antec True Power Trio 650W~Thermaltake Soprano~Vista Ultimate x64 SP2/Win7 RC1

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts