Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: Questions about PC-D600 Case




  1. #21
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    Hello. I purchased my PC-D600 on 3/21/14 and have built a fairly high end liquid cooled system and love most everything about the case. THe problem I am having is with the plastic inserts that accept the pins to hold the side panel on. These have broken 3 times on me. I was broken out of the box but since the case included an extra I just chalked it up to bad luck. Since then, the spare has broken and the one next to it. I have tried to repair them with Crazy Glue but the next time I remove the panel they break again. My right side panel is now missing 2 inserts as I cannot repair them anymore. Please advise on how I should proceed to resolve this. I have by no means been rough with it and have been building fairly high end systems for years. I love the clen lines of the screwless design but these inserts seem very fragile. I have attached a picture of the part I am referring to. I did send a message through Lian Li's support website but no response thus far. Thanks!

    Questions about PC-D600 Case-photo1-3-jpg

  2. #22
    Join Date
    Aug 2012
    Location
    Taipei, Taiwan
    Posts
    483

    Default Re: Questions about PC-D600 Case

    Quote Originally Posted by zmn668 View Post
    Hello. I purchased my PC-D600 on 3/21/14 and have built a fairly high end liquid cooled system and love most everything about the case. THe problem I am having is with the plastic inserts that accept the pins to hold the side panel on. These have broken 3 times on me. I was broken out of the box but since the case included an extra I just chalked it up to bad luck. Since then, the spare has broken and the one next to it. I have tried to repair them with Crazy Glue but the next time I remove the panel they break again. My right side panel is now missing 2 inserts as I cannot repair them anymore. Please advise on how I should proceed to resolve this. I have by no means been rough with it and have been building fairly high end systems for years. I love the clen lines of the screwless design but these inserts seem very fragile. I have attached a picture of the part I am referring to. I did send a message through Lian Li's support website but no response thus far. Thanks!

    Questions about PC-D600 Case-photo1-3-jpg
    Hi zmn668,

    I apologize for the inconvenience of the clips. Could you PM me the date of when you submitted the request through the webforum, along with other details like your submission?

    Also, please feel free to share pics of your build. Would love to see. :)
    GlobalPR.com.tw | Official Agency for Lian Li
    Visit Lian Li at www.Lian-Li.com
    Facebook: www.facebook.com/LianLiHQ

  3. #23
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    Quote Originally Posted by Lian Li Tech View Post
    Hi zmn668,

    I apologize for the inconvenience of the clips. Could you PM me the date of when you submitted the request through the webforum, along with other details like your submission?

    Also, please feel free to share pics of your build. Would love to see. :)
    Within the last hour I received an email from tech support and they are sending me some inserts from Taiwan.. I appreciate your quick reply. I'll post a couple pics soon

  4. #24
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    A few night time shots of my build. Second GTX 780 will be added for SLI as soon as the waterblock arrives. Build as follows:

    Intel i7 3770K 3.5 GHZ quad core with hyperthreading CPU with XSPC Raystorm waterblock
    Asus Republic of Gamers Maximus V Formula motherboard with EK waterblock
    8GB (2x4GB) G-skill TridentX DDR3 2400Mhz memory (9-11-11-31)
    MSI GTX 780 3GB GDDR5 memory with XSPC Razor waterblock (soon to be x 2 in SLI)
    Samsung 840 EVO 250gb SSD
    Lian-Li PC-D600 full tower all aluminum case
    Alphacool ST30 240mm all copper radiator
    Alphacool ST30 360mm all copper radiator
    Alphacool ST30 420mm all copper radiator
    Monsoon Bay Reservoir V2 with D5 pump
    Seasonic X-series 750W Gold rated power supply
    NZXT Sentry Mix2 fan controller
    NZXT white LED lighting
    8 Corsair AF120 LED fans and 3 Corsair AF140 LED fans
    Black XSPC 7/15 x 5/8 tubing with various XSPC black chrome fittings and Bitspower Black Sparkle drain valve
    Silverstone red braided power cable extension
    Shakmods red braided front panel connection extensions

    Questions about PC-D600 Case-photo1-5-jpg

  5. #25
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    And a look through the side window

    Questions about PC-D600 Case-photo2-1-jpg

  6. #26
    Join Date
    Aug 2012
    Location
    Taipei, Taiwan
    Posts
    483

    Default Re: Questions about PC-D600 Case

    Quote Originally Posted by zmn668 View Post
    And a look through the side window

    Questions about PC-D600 Case-photo2-1-jpg
    Loving the red and black combo! When is your second 780 coming in?
    GlobalPR.com.tw | Official Agency for Lian Li
    Visit Lian Li at www.Lian-Li.com
    Facebook: www.facebook.com/LianLiHQ

  7. #27
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    Thanks. I have the 780 but the xspc Razor block is in short supply in the States. I found one and if should arrive late this week of early next week.

  8. #28
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    Quote Originally Posted by zmn668 View Post
    Thanks. I have the 780 but the xspc Razor block is in short supply in the States. I found one and if should arrive late this week of early next week.
    Anyone else have any issues with front panel rattling? Seems if I press in the center where the support is between the 3 front fans and the bays it flexes inward against the support and the rattle stops but it pops back out when I let go and rattles again. Wish they had added some kind of clip there to hold it. I tried adding Velcro but that is too thick causing it to bow out then. Thanks.

  9. #29
    Join Date
    Apr 2014
    Location
    USA
    Posts
    7

    Default Re: Questions about PC-D600 Case

    GTX 780 SLI goodness...

    Questions about PC-D600 Case-img_20140511_171534_950-jpg

  10. #30
    Join Date
    Aug 2016
    Location
    Germany
    Posts
    1

    Default Questions about PC-D600 Case

    Hello,

    does the PC-D600 support the corsair hydro series H115i 280 mm behind the motherboard tray (where the HDD bays are)?

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •