Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Memory frequency issue




  1. #1
    Join Date
    Nov 2007
    Location
    Australia
    Posts
    286

    Default Memory frequency issue

    I am running 2x 512MB [1GB] DDR2-533 [266mhz] on an ASROCK 775twins-HDTV R2 and Pentium D 830 3.0GHZ.

    When i open CPU-Z and look at the memory frequency, it says 200MHZ instead of 266MHZ.

    Why is this happening? Is my memory being underclocked in order to remain in a FSB:DRAM ratio of 1:1.

    How do i adjust it so that it is running at its full capacity

  2. #2
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default Re: Memory frequency issue

    Just because you have memory rated at a specific speed does not mean that your system will automatically run the memory at that speed. Your Pentium D processor runs at an FSB of 800MHz... in other words, a quad-pumped 200MHz FSB. You will need to physically go into the BIOS and overclock the memory for it to run at its full rated speed. It appears that your mainboard is simply running the system at default speeds, so nothing is wrong.
    Old age and treachery will overcome youth and skill
    My Toys

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •