Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM




  1. #1
    Join Date
    Oct 2008
    Posts
    8

    Default Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM

    Hello there guys , i was wondering why these kind of memory appers on Everest as 800 MHZ , even when they r 1066 MHZ.... i copied the syntax from Everest :
    DIMM1: Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-13 @ 270 MHz)

    Greets.

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM

    1066 ram is 800 ram, that has been tested to run within the specified voltage range at the specified timings.

    The user must adjust the memory multiplier (And possibly FSB) and manually set the timings and voltages to run 1066.

  3. #3
    Join Date
    Oct 2008
    Posts
    8

    Default Re: Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM

    Oh... 10x alot , i got it...
    Last edited by adam_daxa; 10-16-2008 at 10:03 PM.

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM

    Yeah it is normally to see this with all 1066 ram

  5. #5
    Join Date
    Oct 2008
    Posts
    8

    Default Re: Corsair Dominator CM2X2048-8500C5D 2 GB DDR2-800 DDR2 SDRAM

    i've checked it in the Bios of my comp' , my SPD of my memory's was 3.2 and my FSB was 333 so it is 1066 after all... :)

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •