Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: Hi-Level Ram problem..




  1. #1
    Join Date
    Dec 2008
    Posts
    36

    Default Hi-Level Ram problem..

    I have a GA-EP45T-DS3R mobo and 2 gb (2x1) hi level ddr3 1333 mhz. No matter what i do i can't get them to work.(It starts and a few secs later it restarts) I don't know anything about timings or else but i'm open to suggestions. Please help..
    Last edited by PlUgOuT; 02-13-2009 at 07:11 AM.

  2. #2
    Join Date
    Dec 2008
    Posts
    36

    Default Re: Hi-Level Ram problem..

    Somebody ? Anybody please help i'm desperate..

  3. #3
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi-Level Ram problem..

    Please provide me a link to this ram, and tell me what CPU you are using and what speed you are running it at and I can help.

    If you want, please also give me the settings you are using as of now that fail and I will advise back once you link your ram and give me your specs

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.550V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  4. #4
    Join Date
    Dec 2008
    Posts
    36

    Default Re: Hi-Level Ram problem..

    Thanks for your response. Is there a way i can see the bios settings without restarting? ( A windows program maybe)

    Btw i could provide you with a link but that darn company haven't updated even a single bit in they're site since 2006. I'm using Core2Duo E4500 2.2GHz no overclock..

  5. #5
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi-Level Ram problem..

    A old site link is fine, I just want to check your model's warrantied voltages and such. You could just give me the model number and I may be able to find what I want to see that way, but go ahead and give me the link you have now as well.

    No, you will have to go into the BIOS and manually write your settings down, then come back here and fill that out. No easy way to do it, sorry.

  6. #6
    Join Date
    Dec 2008
    Posts
    36

    Default Re: Hi-Level Ram problem..

    What i meant is , the site is old that the newest card is ddr2 in there.
    Here

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 11x
    Fine CPU Clock Ratio.....................:.I couldn't find this
    CPU Frequency ...........................: 2.2GHz (200x11)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 200
    PCI Express Frequency (Mhz) .........:Auto

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................:I couldn't find this
    PCI Express Clock Drive.................I couldn't find this
    CPU Clock Skew (ps)....................:I couldn't find this
    MCH Clock Skew (ps)...................: I couldn't find this


    DRAM Performance Control
    Performance Enhance...................: [Turbo]
    Extreme Memory Profile (X.M.P.).....: I couldn't find this
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: Auto
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time........................9 [Auto]
    tRCD .........................................9 Auto]
    tRP'...........................................9 Auto]
    tRAS..........................................24 Auto]

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD........................................... 4 [Auto]
    tWTR..........................................5 [Auto]
    tWR............................................10 [Auto]
    tRFC...........................................74 [Auto]
    tRTP...........................................5 [Auto]
    Command Rate (CMD) ....................:0 [Auto]

    Driving Strength Profiles I couldn't find this
    Driving Strength ............................ I couldn't find this

    Channel A
    Static tRead Value.........................: 4 [Auto]
    tRD Phase0 Adjustment...................:0 [Auto]
    tRD Phase1 Adjustment...................:0 [Auto]
    tRD Phase2 Adjustment .................:0 [Auto]
    tRD Phase3 Adjustment..................:0 [Auto]
    Trd2rd(Different Rank)....................:9 [Auto]
    Twr2wr(Different Rank)...................:7 [Auto]
    Twr2rd(Different Rank)...................:8 [Auto]
    Trd2wr(Same/Diff Rank)..................:8 [Auto]
    Dimm1 Clock Skew Control...............:I couldn't Find this
    Dimm2 Clock Skew Control...............:I couldn't Find this

    Channel B
    Static tRead Value.........................:4 [Auto]
    tRD Phase0 Adjustment...................:0 [Auto]
    tRD Phase1 Adjustment...................:I couldn't Find this
    tRD Phase2 Adjustment .................:I couldn't Find this
    tRD Phase3 Adjustment..................:I couldn't Find this
    Trd2rd(Different Rank)....................:I couldn't Find this
    Twr2wr(Different Rank)...................:I couldn't Find this
    Twr2rd(Different Rank)...................:I couldn't Find this
    Trd2wr(Same/Diff Rank)..................:I couldn't Find this
    Dimm1 Clock Skew Control...............:I couldn't Find this
    Dimm2 Clock Skew Control...............:I couldn't Find this

    Motherboard Voltage Control
    Voltage Type.………... Normal Current
    CPU
    CPU Vcore….……….........................:1.28750V [Auto]

    CPU Termination….....: 1.200V [Auto]

    CPU PLL………………….... 1.500V [Auto]

    CPU Referen.…………....0.760V [Auto]

    CPU Reference2………,,I couldn't find this

    MCH/ICH
    MCH Core…………….....1.100v [Auto]
    MCH Reference….…….0.760v [Auto]
    MCH/DRAM Ref.…......0.750v [Auto]
    ICH I/O……………….....1.500v [Auto]
    ICH Core…………...……1.100V............: I couldn't find this

    DRAM
    DRAM Voltage ……....1.500V [Auto]
    DRAM Termination .…0.750V [Auto]
    Channel A Reference 0.750V [Auto]
    Channel B Reference 0.750V [Auto]

    Advanced Settings
    Limit CPUID Max. to 3.....................: I couldn't find this
    No-Execute Memory Protect............: [I couldn't find this
    CPU Enhanced Halt (C1E)................: I couldn't find this
    C2/C2E State Support....................: I couldn't find this
    x C4/C4E State Support..................: I couldn't find this
    CPU Thermal Monitor 2(TM2) ...........: I couldn't find this
    CPU EIST Function.........................: I couldn't find this
    Virtualization Technology................: I couldn't find this

    Integrated Peripherals
    Legacy USB Storage Detect............ I couldn't find this
    ..

  7. #7
    Join Date
    Dec 2008
    Posts
    36

    Default Re: Hi-Level Ram problem..

    Is it hopeless?..

  8. #8
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi-Level Ram problem..

    No man, I can help for sure.

    Can you at least tell me what the Model # is on your sticker of your ram? If you cannot see it there, look in CPU-z SPD Tab. If still not luck, at least can you tell me what timings and voltages are on the sticker of the ram?

    I can provide you some General help for now, but I cannot advise best without knowing the above things. You do know you will HAVE TO overclock to run your ram at 1066-1333 right?


    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio ..........................: 11x
    CPU Frequency ...........................: 2.2GHz (200x11)


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Disabled]
    CPU Host Frequency (Mhz) ............: 200
    PCI Express Frequency (Mhz) .........:100

    C.I.A.2 .................................:[Disabled]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................:I couldn't find this
    PCI Express Clock Drive.................I couldn't find this
    CPU Clock Skew (ps)....................:I couldn't find this
    MCH Clock Skew (ps)...................: I couldn't find this


    DRAM Performance Control
    Performance Enhance...................: [Turbo] << Here is a huge issue, set to standard!!

    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 4.00C
    Memory Frequency (Mhz) ..............: 800
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................9 [Auto]
    tRCD .........................................9 Auto]
    tRP'...........................................9 Auto]
    tRAS..........................................24 Auto]

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD........................................... 4 [Auto]
    tWTR..........................................5 [Auto]
    tWR............................................10 [Auto]
    tRFC...........................................74 [Auto]
    tRTP...........................................5 [Auto]
    Command Rate (CMD) ....................:2 << Set 2, your memory may be programmed to 1 and it could be causing a issue left in Auto


    Channel A
    Static tRead Value.........................: 4 [Auto]<< Way to low (Use 9-12 for now until we get you sorted out. So set 12)

    tRD Phase0 Adjustment...................:0 [Auto]
    tRD Phase1 Adjustment...................:0 [Auto]
    tRD Phase2 Adjustment .................:0 [Auto]
    tRD Phase3 Adjustment..................:0 [Auto]
    Trd2rd(Different Rank)....................:9 [Auto]
    Twr2wr(Different Rank)...................:7 [Auto]
    Twr2rd(Different Rank)...................:8 [Auto]
    Trd2wr(Same/Diff Rank)..................:8 [Auto]
    Dimm1 Clock Skew Control...............:I couldn't Find this See Below Comment
    Dimm2 Clock Skew Control...............:I couldn't Find this "Ditto"

    Channel B
    Static tRead Value.........................:4 [Auto] << Way to low (Use 9-12 for now until we get you sorted out. So set 12)

    tRD Phase0 Adjustment...................:0 [Auto] <<>> All settings below static tread, on both channels, is there you may just need to use the hotkey (Control + F1 on the MAIN Page of the BIOS) but anyway they all need to be in Auto anyhow so if you cannot find them then they would be anyway

    tRD Phase1 Adjustment...................:I couldn't Find this
    tRD Phase2 Adjustment .................:I couldn't Find this
    tRD Phase3 Adjustment..................:I couldn't Find this
    Trd2rd(Different Rank)....................:I couldn't Find this
    Twr2wr(Different Rank)...................:I couldn't Find this
    Twr2rd(Different Rank)...................:I couldn't Find this
    Trd2wr(Same/Diff Rank)..................:I couldn't Find this
    Dimm1 Clock Skew Control...............:I couldn't Find this
    Dimm2 Clock Skew Control...............:I couldn't Find this

    Motherboard Voltage Control
    Voltage Type.………... Normal Current
    CPU
    CPU Vcore….……….........................:1.28750V [Auto]

    CPU Termination….....: 1.200V [Auto]

    CPU PLL………………….... 1.500V [Auto]

    CPU Referen.…………....0.760V [Auto]



    MCH/ICH
    MCH Core…………….....1.100v [Auto] Go ahead and try 1.5-1.2 here as well.
    MCH Reference….…….0.760v [Auto]
    MCH/DRAM Ref.…......0.750v [Auto]
    ICH I/O……………….....1.500v [Auto]


    DRAM
    DRAM Voltage ……....1.500V [Auto] Set this to 1.6 for now, it may help? Your ram may be 1.8 or higher ram though so not sure until you give me some more info

    DRAM Termination .…0.750V [Auto]
    Channel A Reference 0.750V [Auto]
    Channel B Reference 0.750V [Auto]

    The below settings are on the Advanced BIOS page

    Advanced Settings
    Limit CPUID Max. to 3.....................: I couldn't find this
    No-Execute Memory Protect............: [I couldn't find this
    CPU Enhanced Halt (C1E)................: I couldn't find this
    C2/C2E State Support....................: I couldn't find this
    x C4/C4E State Support..................: I couldn't find this
    CPU Thermal Monitor 2(TM2) ...........: I couldn't find this
    CPU EIST Function.........................: I couldn't find this
    Virtualization Technology................: I couldn't find this


    The setting below is in the Integrated Peripherals BIOS page

    Integrated Peripherals
    Legacy USB Storage Detect............ I couldn't find this

  9. #9
    Join Date
    Dec 2008
    Posts
    36

    Default Re: Hi-Level Ram problem..

    Thanks i'll try these but i'm afraid of damaging my kingston. Even though hil-levels may be above 1.5 (but we checked and they're 1.5) i have to adjust the settings on kingston cuz i can't load bios with hil-levels. Here's the info:

    HLV-PC10600DK/2G

    2GB DDR3 1333MHz Dual Kit 1/2

    That's all. No info on voltage:s..

  10. #10
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Hi-Level Ram problem..

    Kingstons? What are you talking about now, you never mentioned mixed modules before. This will almost always be a headache.

    As for your voltages on the Hi-Levels can you please post me a screenshot of CPU-z with the SPD Tab showing for one of them?

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •