Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 1 of 1

Thread: ep43-ds3 and 4G memory




  1. #1
    Join Date
    Sep 2009
    Posts
    2

    Default ep43-ds3 and 4G memory

    Hi
    I am looking for some advise and help with this build
    GA-EP43DS3 Bios F9
    Intel E7500 2.93GHz
    Kingston 4x KVR1066D2N7/1G
    Inno3d geforce 9800gt 512mb ddr3
    Seagate ST3160813AS
    Antec Neo HE550
    www.valueram.com/datasheets/KVR1066D2N7_1G.pdf
    I have played with the setting for 2g and system seem to run fine in duel channel but as soon as i put the other 2g in system keeps on rebooting i have swaped memory around and run mem test with no errors so i believe i still need to change some more setting or start again but this is where i am stuck so need some help
    Many thanks

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............:[Auto]
    CPU Clock Ratio ..........................:11x
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................:2.93mhz 266x11
     
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............:266mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    C.I.A.2 .................................:[Disabled]
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................:800mv
    PCI Express Clock Drive.................:900mv
    CPU Clock Skew (ps)....................:0ps
    MCH Clock Skew (ps)...................:0ps
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............:[Auto]
    Memory Frequency (Mhz) ..............:1066mhz
    DRAM Timing Selectable ................: [Manual]
    Standard Timing Control
    CAS Latency Time........................7
    tRCD .........................................7
    tRP'...........................................7
    tRAS..........................................24
    Advanced Timing Control
    tRRD...........................................4
    tWTR..........................................14
    tWR............................................18
    tRFC...........................................58
    tRTP...........................................6
    Command Rate (CMD) ....................:[Auto]
    Driving Strength Profiles
    Driving Strength ............................
    Channel A
    Static tRead Value.........................:[Auto]
    tRD Phase0 Adjustment...................:[Auto]
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Channel B
    Static tRead Value.........................:[Auto]
    tRD Phase0 Adjustment...................:[Auto]
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................:Auto
    CPU Termination…..... 1.200V*.......:Auto
    CPU PLL…………………....1.500V*.......:Auto
    CPU Referen.…………....0.755V*.......:Auto
    CPU Reference2………,,0.800V*.......:Auto
    MCH/ICH
    MCH Core…………….....1.100V...........:Auto
    MCH Reference….…….0.800V...........:Auto
    MCH/DRAM Ref.…......0.900V...........:Auto
    ICH I/O……………….....1.550V............:Auto
    ICH Core…………...……1.100V............:Auto
    DRAM
    DRAM Voltage ……....1.800V............:1.800v
    DRAM Termination .…0.900V............:Auto
    Channel A Reference 0.900V............:Auto
    Channel B Reference 0.900V............:Auto
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB
    Last edited by sonax04; 09-27-2009 at 07:47 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •