Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Im completely new to Overclocking and I really need some help..... PLEASE




  1. #1
    Join Date
    Jan 2011
    Location
    Wisconsin
    Posts
    3

    Talking Im completely new to Overclocking and I really need some help..... PLEASE

    Im completely new to Overclocking and I really need some help..... PLEASE-cpu-memory-jpgIm trying to get my FSB:DRAM ratio as close to 1:1 as possible, but right now im sitting at 1:7 ratio....

    Here are my specs...
    ---------------------------------------
    Intel i7-2600K
    Gigabyte P67A-UD7 Motherboard
    Corsair Dominator GT 1866MHZ (4x2GB)
    Corsair H70 Hydro Cooling
    ----------------------------------------

    Currently my I think my ram is running at 1866mhz but not sure. In my BIOS i set them to 1866 and also raised the voltage up to 1.66v to give them proper power. When I run CPU-Z i get this....
    --------------------------------------
    DRAM Freq 931.3MHZ
    FSB:DRAM 1:7
    CAS# Latency (CL) 12.0 Clocks
    RAS# to CAS# Delay (tRCD) 13 Clocks
    RAS# Precharge (tRP) 13 Clocks
    Cycles Time (tRAS) 34 Clocks
    Command Rate (CR) 2T
    -------------------------------------------

    Then Under SPD un GPU-Z I see this
    -------------------------------------
    Module Size 2048 MBytes
    Max Bandwidth PC3-10700H (667) MHz
    -------------------------------------


    Im so confused and dont know where to start? Am I not utilizing my RAM to its fullest Potiental??? Please any knowledge would be greatly appreciated.


    Thanks!!

  2. #2
    Join Date
    Jan 2011
    Location
    Wisconsin
    Posts
    3

    Default Re: Im completely new to Overclocking and I really need some help..... PLEASE

    Here is another Pic of the CPU-Z CPU tab:
    Im completely new to Overclocking and I really need some help..... PLEASE-cpu-cpu-jpg

  3. #3
    Join Date
    Jan 2011
    Location
    Wisconsin
    Posts
    3

    Default Re: Im completely new to Overclocking and I really need some help..... PLEASE

    lastly the CPU-Z SPD Tab:
    Im completely new to Overclocking and I really need some help..... PLEASE-cpu-spd-jpg

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •