Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: How can I set up memory module to operate at 1066???




  1. #1
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default How can I set up memory module to operate at 1066???

    Hello
    I have 2 qustions:
    1.) I have 2x2GB Kingston HiperX @1066 MHz
    Motherboard:GA-EP45DS4
    CPU:Intel Q6600
    How can I set up memory module to operate at 1066MHz?

    2.) also have a module of 2GB @ 800 MHz
    Whether they can be paired and what are the settings in bios?

    What do you suggest, to leave only 2x2gb @ 1066 MHz, or to mix with the module from 800 MHz?

    Thnx a lot

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: How can I set up memory module to operate at 1066???

    Can you give me a link to each set of memory so we can check the specs of each.

  3. #3
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default Re: How can I set up memory module to operate at 1066???

    Yes, I can....

    KHX8500D2/2G @1066 MHz
    KHX8500D2/2G @1066 MHz
    KHX6400D2LL/2G @800 MHz

    1&3 slot KHX8500D2/2G
    2 slot KHX6400D2LL/2G

    operate in flex memory mode... @800mhz...

    thnx...

  4. #4
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: How can I set up memory module to operate at 1066???

    Set primary memory timings to 5-5-5-15 and Dram Voltage = 2.20 volts.
    With Cpu Host Frequency = 333MHz, set System Memory Multiplier = 3.20B (333 x 3.20 = 1066MHz).
    You should perform stability/stress testing to ensure that your system is stable.

    I suggest running with 2 x 2GB and use the single memory module as a high tech paper weight. ;)

    You can use Flex mode mode with three modules, but you will need to find a lower stable memory speed and memory settings.

    Check out Desktop Boards — Single, dual, triple and flex memory modes for more information.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  5. #5
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default Re: How can I set up memory module to operate at 1066???

    thanks buddy,
    but I currently have installed 8GB (4X2GB), if you have a proposal how to make 8 GB of memory to operate at 1066MHz,
    Thanks again

  6. #6
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default Re: How can I set up memory module to operate at 1066???

    4x2GB
    KHX8500D2/2G @1066 MHz
    KHX8500D2/2G @1066 MHz
    KHX8500D2/2G @1066 MHz
    KHX8500D2/2G @1066 MHz
    = 8GB

    gigababjte not yet set a new update, it may be the problem?
    the latest beta update is available

  7. #7
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default Re: How can I set up memory module to operate at 1066???

    I currently work at 800MHz

  8. #8
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: How can I set up memory module to operate at 1066???

    With 8GB (4 x 2GB) of identical memory modules running at 800MHz, which stress tests have you run and how long did each test run? Were there any errors during any of the stress tests?

    The fastest way to optimize your memory is to provide detailed information found in steps 1 - 4 in the middle of http://forums.tweaktown.com/gigabyte...tml#post295784, post #5.
    Please also post a CPU-Z text report by clicking on the ABOUT tab, and then click the SAVE REPORT (.TXT) button.

    FWIW, I'm running 8GB of Kinston HyperX T1 PC2-8500 memory at 874MHz with tight 4-4-4-10 timings, and the real world performance is excellent. Running DDR2 memory at or near 1066MHz makes no difference in most games or programs. With memory settings similar to mine, synthetic memory benchmark test scores will be lower than 1066MHz speeds. In my opinion, 1066 - 1100MHz memory speeds are great for bragging rights, but nothing else.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  9. #9
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default Re: How can I set up memory module to operate at 1066???

    in which the program can provide detailed information that led me.
    From BIOS or another software
    thanks

  10. #10
    Join Date
    Apr 2011
    Location
    Belgrade
    Posts
    64

    Default Re: How can I set up memory module to operate at 1066???

    Wow I found hehe:) Sorry for my stupidity. I am currently at work, so I will later write.
    Thanks again

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •