Announcement

Collapse
No announcement yet.

My Wiring job SUX!! Help! *pix*

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    My Wiring job SUX!! Help! *pix*

    Ahhh, I spent 3 hours trying to make this look neat and its still the worse wiring job i have ever seen! These 7 fans with the controller aren't helpng at all! ok, the faint of heart may want to look away.....





    seriously...its bad...







    I have a bunch of these things, so I could use them for the inside of PC (been using for speaker wires)


    Anyways, help! Thanks. Also, anyone with a Xaser III post pics of their wires? Thanks!! peace
    Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's
    Tags: None
  • #2
    Re: My Wiring job SUX!! Help! *pix*

    oh **** just realized you guys are going to see my lack of phase change on my floppy..i just took it out, going to dual phase change, upping it 4.32 mb
    Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

    Comment

    • #3
      Re: My Wiring job SUX!! Help! *pix*

      **** dude I dont know what to think here....(Speachless)

      Anyway one thing to do would be get rid of those round IDE cables and, get normal ones, then follow this thread.

      You have all those cable ties... use them. Tie all the power cables coming out of your PSU and branch then off nicely. Hide unused power connectors in any unused optical drive bays.

      I also have 7 system/case fans and my system is nice and tidy, take some tape or if you have some little places you can put ties through use them and keep all the fan wires alone the edge of the case if possable...

      It can take some time to get everything perfect, expecialy the IDE cable folding... To get everything the way it is now took me about 2 weeks.

      Comment

      • #4
        Re: My Wiring job SUX!! Help! *pix*

        lol! I just smash everything in there and lean against the case door to get it to shut! I like my rounded IDE cables....I think I want to keep them they look nice, just not right now! :)
        Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

        Comment

        • #5
          Re: My Wiring job SUX!! Help! *pix*

          Well if you have a plexiglass door I recomend you get rid of them or make them look real nice by tidying up in there a bit.... those ties realy do help.

          My suggestion turn it off and dissconnect everything and start over, making sure you dress everthing properly.

          Comment

          • #6
            Re: My Wiring job SUX!! Help! *pix*

            This is more like what the inside should look like.
            Attached Files

            Comment

            • #7
              Re: My Wiring job SUX!! Help! *pix*

              Even then it doesn't look ThAT neat...ok well yes it does :) but still, there are neater. Thank you so much for the reference! Do you have any higher res pics? Thank you
              Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

              Comment

              • #8
                Re: My Wiring job SUX!! Help! *pix*

                Oh yea, also, How do you connect the fans to speed controller etc? I think I'm doing it wrong because when I turnt he knobs it doesn't make much of a difference if any (it may just be my mind playin trixies) Thanks
                Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

                Comment

                • #9
                  Re: My Wiring job SUX!! Help! *pix*

                  I am not exactly sure as I don't have on but, I think you just plug the fans into the controler... That would make more scense to me mabey there are little tails that come from the controler that you plug the fans into.... think it would be pretty hard to skrew up.... but things tend to be trickier than the look.

                  Comment

                  • #10
                    Re: My Wiring job SUX!! Help! *pix*

                    wayout are you having any trouble with your PCI card clips? Mine don't work on my vidcard OR soudncard (audigy 2) The pci part goes up past the fawkin top of faceplate so it doesn't shut! so annoying! whenever i try to plug in a cable i have to take off side to hold the card in place.
                    Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

                    Comment

                    • #11
                      Re: My Wiring job SUX!! Help! *pix*

                      No sorry I don't have a better pic and that Antec case doesn't have those card clips.

                      Comment

                      • #12
                        Re: My Wiring job SUX!! Help! *pix*

                        I just realized you don't have a Xaser III, here I am looking at the pic I printed out that you posted up, and I realized that its not mine! Anyone who has done the Xaser III nicely please post pics! Thx
                        Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

                        Comment

                        • #13
                          Re: My Wiring job SUX!! Help! *pix*



                          Damn that is just beautiful! Airflow to the max!

                          It is easier for him though, He has no sata cables!
                          Case: Thermaltake Xaser III // Power Supply: Thermaltake Butterfly 480w // Motherboard: Chaintech 9CJS Zenith // Processor: Intel Pentium 4 2.4 C // Heatsink: Vantec Aeroflow // Video Card: Asus 9600 XT // Harddrive: Western Digital Raptor 36.7 GB // DVD Burner: Pioneer DVR-A06 // Soundcard: Audigy 2 // Speakers: Logitech Z-680's

                          Comment

                          • #14
                            Re: My Wiring job SUX!! Help! *pix*

                            If you look in the thread I linked there are aloso SATA cable examples.

                            Comment

                            Previous template Next
                            Working...
                            X