Hi.
my computer specs are:
sempron 2800+ running at 2ghz
2x 256 kingston valueram ddr400
MSI k8n neo platinum mobo
geforce 4 ti 4200 agp 4x
350w power
so i wanted to overclock this thing and got to fsp 250 (2ghz) by dropping the memory clock..
the problem is that everytime i go over 250 fsb the computer crashes and wont show any visual what so ever.. i tried dropping the gfx card to agp 2x and i was able to boot with 251 fsb but there was horrible artifacts and second later it locks up into the boot screen..
now im wondering what to do to get the fsb higher.. the power should be enough and temps are only 30-35c with the boxed cooler so i think i should be able to go to atleast 2200-2400mhz :)
cpu runs at default voltage atm.. i also tried rising it but it didnt help anything
my computer specs are:
sempron 2800+ running at 2ghz
2x 256 kingston valueram ddr400
MSI k8n neo platinum mobo
geforce 4 ti 4200 agp 4x
350w power
so i wanted to overclock this thing and got to fsp 250 (2ghz) by dropping the memory clock..
the problem is that everytime i go over 250 fsb the computer crashes and wont show any visual what so ever.. i tried dropping the gfx card to agp 2x and i was able to boot with 251 fsb but there was horrible artifacts and second later it locks up into the boot screen..
now im wondering what to do to get the fsb higher.. the power should be enough and temps are only 30-35c with the boxed cooler so i think i should be able to go to atleast 2200-2400mhz :)
cpu runs at default voltage atm.. i also tried rising it but it didnt help anything
Comment