Current EX-58-Extreme BIOS Config @4.2HTON

[PeterW_R]

[MdntMank]

Re: Current EX-58-Extreme BIOS Config @4.2HTON

From every 3841,s I have had about 15 all needed massive amounts of voltage after 4ghz and after 4 ghz you are not gonna notice much difference to get mine @ 4.455. I need almost 1.575vcore 1.51 on vtt but I am also running ram @ 1980 @ 1.64. If I do it again I will settle @ 4.0 to 4.2 depending on voltage @ 4.0 I am @ 1.32 on vcore and Vtt @ 1.21 mem 1.64 and everything else auto, LLC enabled. My 2 cents stick with what you have 4.0 to 4.2 is plenty fast on these chips.

[PeterW_R]

Re: Current EX-58-Extreme BIOS Config @4.2HTON

Thank you MdntMank, I'm concentrating now on lowering voltages and testing stability, 4.2 HT is good for me.

I've lowered QPI PLLto 1.84,IOH Core to 1.32,ICH I/O to 1.58 and ICH Core to 1.18
QPI/VTT Is at 1.42 now, can't lower Vcore much or windows won't boot.

I'm testing stability now, everything seems to run just fine, I can do prime 95 and super pi all I want, I have a problem when I start the third 3dmark 05 loop with prime 95 and superpi enabled, computer often displays a BSOD displaying an error with nv4.sys.

The 2x280GTX are running SLI@stock speeds and completed many 3dmark loops just fine with default BCLK.

Could be that my case is running hot, I'll be adding extra PCI exhaust fans latter this week.

Also, I have PCI-E voltage set to 1.5V and PCI-E Clock set to 100.

Should I raise those values to 1.54, 101?
Should I raise IOH voltage too?

[PeterW_R]

Re: Current EX-58-Extreme BIOS Config @4.2HTON

bump

[PeterW_R]

Re: Current EX-58-Extreme BIOS Config @4.2HTON

bump 2