I have a new configuration that keeps failing. First I thought it was bad RAM, but memtest doesn't always show errors (it usually does on cold boot, but afterwards there are no errors).
I've flashed the bios to F4 successfully, but I still can't get a stable system.
I have a Core i5 750 processor, a G.Skill [email protected] 2x2GB 1333MHz set and the P55-UD3.
I've read that the Vcore and QPI/VTT voltages should be my main concern, but I don't want to ruin anything and would really appreciate advice.
I want to run a non overclocked stable system and would really appreciate help. So if anyone could post a set of stable BIOS settings it would be great, thanks.
I've flashed the bios to F4 successfully, but I still can't get a stable system.
I have a Core i5 750 processor, a G.Skill [email protected] 2x2GB 1333MHz set and the P55-UD3.
I've read that the Vcore and QPI/VTT voltages should be my main concern, but I don't want to ruin anything and would really appreciate advice.
I want to run a non overclocked stable system and would really appreciate help. So if anyone could post a set of stable BIOS settings it would be great, thanks.
Comment