Announcement

Collapse
No announcement yet.

OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    hi guys!! this is my first i7 oc..so please help me with my i7 930! i'd really appreciate it.
    my target OC is 4.0 GHZ 24/7


    My system:


    CPU: Intel i7 930 D0

    Cooling: Cooler Master 212 Plus

    Mobo: Gigabyte GA-X58A-UD3R (rev. 1.0)

    Memory: G.SKILL Ripjaws Series 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL8T-6GBRM

    GPU: MSI R5770 Hawk Radeon HD 5770

    HDDs: Western Digital Caviar Black WD1001FALS 1TB 7200 RPM 32MB Cache SATA 3.0Gbs

    PSU: Cooler Master Real Power Pro M850 RS-850-ESBA





    thanks for your time guys!!!
    Gyga
    Last edited by GYGA; 06-06-2010, 04:01 PM.
    Tags: None
  • #2
    Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

    You may refer to this forumer's o/c profile.

    Comment

    • #3
      Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

      here are my settings for 4.2 that I use for 24/7 use. Im under water so they may not work for you but it may help.... If you try the settings above or mine and have a problem with them post back with the current settings that failed. To test your settings use either Prim95 or LinX.

      Code:
      Advanced CPU Features:
CPU Clock Ratio ................................ [21x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Disabled]
CPU Enhanced Halt (C1E) ................... [Enabled]
C3/C6/C7 State Support .................... [Enabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]


Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... 18 (Always 2x memory Multi or 2x +1)
Isonchronous Frequency ..................[Enabled]


Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 200
PCI Express Frequency (MHz) ........... [100]

C.I.A.2 [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]


Advanced DRAM Features:
Performance Enhance ...................... [Extreme]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [8]
DRAM Timing Selectable (SPD) .......... [Manual]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8
tRCD ....................................... 8
tRP ......................................... 8
tRAS ....................................... 20

Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

##Channel A Advanced Timing Control##
tRC ........................................ [Auto] (Should be = tRAS + tRP or above for stability)
tRRD ....................................... [Auto]
tWTR ...................................... [Auto] (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................ [Auto]
tWTP ....................................... [Auto]   (tWTP Must = tWR + tWL + 4)
tWL ........................................ [Auto]    (tWL Must be CAS Latency -1)
tRFC ....................................... [Auto]
tRTP ....................................... [Auto]
tFAW ...................................... [Auto]
Command Rate (CMD) ................ T1

##Channel A Misc Timing Control##
Round Trip Latency ................... [Auto]

B2B CAS Delay .......................... [Auto]


Advanced Voltage Control:

CPU
Load Line Calibration ................. [Enabled]
CPU Vcore 1.25000 ..................... [1.4125]
Dvid .................................. + 0.0000
QPI/VTT Voltage 1.150v ............ 1.375
CPU PLL 1.800v ....................... 1.8000

MCH/ICH
PCIE 1.500v ........................... 1.5
QPI PLL 1.100v ....................... 1.1
IOH Core 1.100v ..................... 1.16
ICH I/O 1.500v ....................... [Auto]
ICH Core 1.1v ........................ [Auto]

DRAM
DRAM Voltage 1.500v .............. 1.66
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
      Main Rig
      Gigabyte z87x-OC
      Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
      G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
      Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
      Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
      HiS ATI HD 6950
      Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
      Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
      Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
      Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
      CORSAIR CMPSU-850TX PSU
      Swiftech MCP655-B Pump
      EK Supremacy Cpu Block
      Swiftech Mcres Micro Rev 2 Reservoir
      Black Ice GTX Xtreme 360 Radiator



      Comment

      • #4
        Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

        Originally posted by onemilimeter View Post
        You may refer to this forumer's o/c profile.
        Originally posted by Acebmxer View Post
        here are my settings for 4.2 that I use for 24/7 use. Im under water so they may not work for you but it may help.... If you try the settings above or mine and have a problem with them post back with the current settings that failed. To test your settings use either Prim95 or LinX.

        Code:
        Advanced CPU Features:
CPU Clock Ratio ................................ [21x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Disabled]
CPU Enhanced Halt (C1E) ................... [Enabled]
C3/C6/C7 State Support .................... [Enabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Enabled]
Virtualization Technology ................... [Disabled] << Disabled if you do not use Vmware or Virtual PC Programs
Bi-Directional PROCHOT ..................... [Enabled]
 
 
Uncore & QPI Features:
QPI Link Speed .............................. x36
Uncore Frequency .......................... 18 (Always 2x memory Multi or 2x +1)
Isonchronous Frequency ..................[Enabled]
 
 
Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 200
PCI Express Frequency (MHz) ........... [100]
 
C.I.A.2 [Disabled]
 
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]
 
 
Advanced DRAM Features:
Performance Enhance ...................... [Extreme]
Extreme Memory Profile (X.M.P) ......... [Disabled]
System Memory Multiplier (SPD) ........ [8]
DRAM Timing Selectable (SPD) .......... [Manual]
 
Channel A + B + C
 
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ...................... 8
tRCD ....................................... 8
tRP ......................................... 8
tRAS ....................................... 20
 
Below values may be left in Auto if you like, generally this is fine.  For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread
 
##Channel A Advanced Timing Control##
tRC ........................................ [Auto] (Should be = tRAS + tRP or above for stability)
tRRD ....................................... [Auto]
tWTR ...................................... [Auto] (Must be Write to Read Delay/Same Rank - (tWL + 4)
tWR ........................................ [Auto]
tWTP ....................................... [Auto]   (tWTP Must = tWR + tWL + 4)
tWL ........................................ [Auto]    (tWL Must be CAS Latency -1)
tRFC ....................................... [Auto]
tRTP ....................................... [Auto]
tFAW ...................................... [Auto]
Command Rate (CMD) ................ T1
 
##Channel A Misc Timing Control##
Round Trip Latency ................... [Auto]
 
B2B CAS Delay .......................... [Auto]
 
 
Advanced Voltage Control:
 
CPU
Load Line Calibration ................. [Enabled]
CPU Vcore 1.25000 ..................... [1.4125]
Dvid .................................. + 0.0000
QPI/VTT Voltage 1.150v ............ 1.375
CPU PLL 1.800v ....................... 1.8000
 
MCH/ICH
PCIE 1.500v ........................... 1.5
QPI PLL 1.100v ....................... 1.1
IOH Core 1.100v ..................... 1.16
ICH I/O 1.500v ....................... [Auto]
ICH Core 1.1v ........................ [Auto]
 
DRAM
DRAM Voltage 1.500v .............. 1.66
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]



        thanks a lot guys!! really appreciate it!! thansk for ur time!! I'll see how it works..

        Comment

        • #5
          Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

          Let us know how you get along, if you have issues please give us the full settings you are trying and we will advise back.

          FYI

          BSOD Error codes and what they mean:
          0X00000050 << Incorrect Memory Timing/Freq or Uncore Multi
          0X00000124 << Incorrect QPI/Vtt Voltage (To Much/Not Enough)
          0X00000101 << Not enough Vcore Voltage


          Good luck tweaking!

          Comment

          • #6
            Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

            hi guys!! here is my setpoint to 3.3 with standard cooler ... because my 212 plus has a broken screw I tested with IntelBurnTestV2 in high mode= pass please!! let me know if everything is fine!!


            thanks a lot!! for ur time guys!!




            Advanced CPU Features:
            CPU Clock Ratio ................................ [21x]
            Intel(R) Turbo Boost Tech .................. [Disabled]
            CPU Cores Enabled ............................ [All]
            CPU Multi Threading .......................... [Enabled]
            CPU Enhanced Halt (C1E) ................... [Enabled]
            C3/C6/C7 State Support .................... [Enabled]
            CPU Thermal Monitor ......................... [Enabled]
            CPU EIST Function ............................ [Enabled]
            Virtualization Technology ................... [Disabled]
            Bi-Directional PROCHOT ..................... [Enabled]


            Uncore & QPI Features:
            QPI Link Speed .............................. x36
            Uncore Frequency .......................... 3200
            Isonchronous Frequency ..................[Enabled]


            Base Clock (BCLK) Control ................ [Enabled]
            BCLK Frequency (MHz) ..................... 160
            PCI Express Frequency (MHz) ........... [100]


            C.I.A.2 [Disabled]
            Advanced Clock Control:
            CPU Clock Drive ..............................[800mV]
            PCI Express Clock Drive ................... [900mV]
            CPU Clock Skew ............................. [0ps]
            IOH Clock Skew ............................. [0ps]


            Advanced DRAM Features:
            Performance Enhance ...................... [Extreme]
            Extreme Memory Profile (X.M.P) ......... [Disabled]
            System Memory Multiplier (SPD) ........ [10]
            DRAM Timing Selectable (SPD) .......... [Quick]


            Channel A Timing Settings:
            ##Channel A Standard Timing Control##
            CAS Latency Time ...................... 8
            tRCD ....................................... 8
            tRP ......................................... 8
            tRAS ....................................... 24

            the other memory parameters set to (AUTO)


            Advanced Voltage Control:
            CPU
            Load Line Calibration ................. [standard]
            CPU Vcore 1.25000 ..................... [1.2000]

            the other parameters set to (Normal)


            DRAM
            DRAM Voltage 1.500v .............. 1.60


            the other parameters set to (Normal)


            Attached Files

            Comment

            • #7
              Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

              looks ok to me,what qpi/vtt voltages did you use? have you tried lowering cpu voltage to 1.18750v? tried without llc?
              Gigabyte z77x UP4-TH F11c Modded Bios
              Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
              Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
              Thermalright Silver Arrow Cpu Cooler
              1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
              1xSamsung f4 HD204UI 2tb hard drive Storage
              Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
              Razer Lycosa Keyboard
              Logitech X-530 5.1 Speakers
              Lite-On iHAS124-19 24x Sata DVDRW
              K-World Hybrid DVB-T 210SE Digital T.V Card
              L.G E2260V L.E.D 1920x1080 Monitor
              Xfx Pro 750w silver rated Psu 80+
              Fractal Arc Midi Case

              http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
              http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

              Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
              Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

              Comment

              • #8
                Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

                Originally posted by wazza300 View Post
                looks ok to me,what qpi/vtt voltages did you use? have you tried lowering cpu voltage to 1.18750v? tried without llc?

                hi Wazza! QPI/VTT set to Normal.. only vcore.. dram and pci voltages .. manually configured.. rest set to Normal!!

                i set vcore to 1.8750!! and test with intelburntest in high mode.. pass!!!

                thank very much Wazza

                I think buy the Corsair H50 to 4.0 4.2 for the price... is the best investment? any suggestions?


                thanks!!!

                Comment

                • #9
                  Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

                  there ok the h50 but have been known to leak,the coolit domino is worse for leaking,good air coolers are prolematech megahalems and the thermalright true ultra 120,if you go for an h50 be carefull when you install it,dont put any pressure or allow the cpu hoses to twist
                  Gigabyte z77x UP4-TH F11c Modded Bios
                  Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
                  Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
                  Thermalright Silver Arrow Cpu Cooler
                  1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
                  1xSamsung f4 HD204UI 2tb hard drive Storage
                  Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
                  Razer Lycosa Keyboard
                  Logitech X-530 5.1 Speakers
                  Lite-On iHAS124-19 24x Sata DVDRW
                  K-World Hybrid DVB-T 210SE Digital T.V Card
                  L.G E2260V L.E.D 1920x1080 Monitor
                  Xfx Pro 750w silver rated Psu 80+
                  Fractal Arc Midi Case

                  http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
                  http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

                  Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
                  Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

                  Comment

                  • #10
                    Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

                    Originally posted by wazza300 View Post
                    there ok the h50 but have been known to leak,the coolit domino is worse for leaking,good air coolers are prolematech megahalems and the thermalright true ultra 120,if you go for an h50 be carefull when you install it,dont put any pressure or allow the cpu hoses to twist


                    thansk again Wazza! thanks for the tip!!

                    Comment

                    • #11
                      Re: OVERCLOCK HELP: Gigabyte UD3R REV 1.0 - i7 930 - Gskill 3x 2GB 1600 MHz

                      Looking good!

                      I agree, if you want a better cooler get a meglaham or thermalright, if you want to go water build your own setup and don't buy a "Kit"

                      Comment

                      Previous template Next
                      Working...
                      X