Hi,
Two weeks ago I mount a pc.
Components
Motherboard: Gigabyte GA-P67A-UD4 B3
Processor: Intel Core i3 2120 3.3Ghz Box Socket 1155
Hard Disk: WD Caviar Blue 500GB SATA3
Graphics card: Asus GeForce GTX 550 Ti DirectCU 1GB GDDR5
RAM memory: Kingston ValueRAM 4GB DDR3 1333 2x2GB
DVD: Asus DRW-24B3ST Grabadora DVD 24X Negra OEM
Power supply: Tacens Radix V 650W
Red Card: Conceptronic 300Mbps 11n Wireless PCI Card
Problem:
The computer starts up properly, I'm install OS Ubuntu 10.04 LTS and Windows 7 Ultimate 64bits and drivers provided by the manufacturers CD's (in the CD or the motherboard i'm use Xpress Install)
Once inside the operating system I sent a reboot the computer, and that at shutdown, when it will turn on again, try to boot but it is restarted again and again until finally boot properly
I'm update BIOS
Change the system restart, the computer was restarted without being shutdown, maintaining constant electric current line during the restart process. (do not know if this change is due to update the BIOS, but I make sure it is due to the update)
Everything seemed to work correctly.
Restarts incurred by the operating system GUI seem to work correctly.
But if the computer hangs, I press the reset button (no reboots with the line of constant electric current) and I usually spend the same problem, the computer try to boot but it is restarted again and again until finally boot properly.
I would like to know the cause of this.
If anyone can help me, thanks.
Two weeks ago I mount a pc.
Components
Motherboard: Gigabyte GA-P67A-UD4 B3
Processor: Intel Core i3 2120 3.3Ghz Box Socket 1155
Hard Disk: WD Caviar Blue 500GB SATA3
Graphics card: Asus GeForce GTX 550 Ti DirectCU 1GB GDDR5
RAM memory: Kingston ValueRAM 4GB DDR3 1333 2x2GB
DVD: Asus DRW-24B3ST Grabadora DVD 24X Negra OEM
Power supply: Tacens Radix V 650W
Red Card: Conceptronic 300Mbps 11n Wireless PCI Card
Problem:
The computer starts up properly, I'm install OS Ubuntu 10.04 LTS and Windows 7 Ultimate 64bits and drivers provided by the manufacturers CD's (in the CD or the motherboard i'm use Xpress Install)
Once inside the operating system I sent a reboot the computer, and that at shutdown, when it will turn on again, try to boot but it is restarted again and again until finally boot properly
I'm update BIOS
Change the system restart, the computer was restarted without being shutdown, maintaining constant electric current line during the restart process. (do not know if this change is due to update the BIOS, but I make sure it is due to the update)
Everything seemed to work correctly.
Restarts incurred by the operating system GUI seem to work correctly.
But if the computer hangs, I press the reset button (no reboots with the line of constant electric current) and I usually spend the same problem, the computer try to boot but it is restarted again and again until finally boot properly.
I would like to know the cause of this.
If anyone can help me, thanks.
Comment