Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Bios problem




  1. #1
    Join Date
    Jul 2004
    Posts
    2

    Unhappy Bios problem

    I have ASUS A7V333 mobo,but I made mistake when I flash BIOS and after
    that everything is black.Can I and how to flash BIOS again?Is there any tool
    to do that from windows or only from DOS?

  2. #2
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default Re: Bios problem

    Did you use the Asus accepted FLASH utility? And more importantly, did you save the old BIOS to disk before FLASHing to the new revision? If so you should be able to revert to the former. If not, then you can try to reFLASH the motherboard but you may or may not succeed. If this doesn't work, you may have to have the CMOS chip physically removed and replaced with a properly coded one.
    Old age and treachery will overcome youth and skill
    My Toys

  3. #3
    Join Date
    Jul 2004
    Posts
    2

    Default Re: Bios problem

    @ Darthtanion
    Yes I use tools from ASUS page,no not save old version BIOS.
    Where can I found new CMOS chip?Can I reprogram CMOS chip with any tool?

  4. #4
    Join Date
    Dec 2001
    Posts
    1,297

  5. #5
    G13man is offline Junior Member
    Join Date
    Jan 2004
    Location
    homeless between MD and PA
    Posts
    69

    Default Re: Bios problem

    do any of your friends have the same mother board?
    if so you can use his to flash yours
    set up for bios on his machine
    before flashing swap the cmos chips [very carefully,u don't want to owe him a mb also]
    flash bios
    power down komp
    swap chips back
    good luck
    k6-2 .and . . . AMD 64bit|3.2,1G[2326],9800xt [both died] miss my 500 K's
    recycled from the trash [and in use]
    2 = 945G chipset boards 2G Celeron and dual Pentium
    3 = AM-37 FIK motherboards 2-2.6 G
    in storage 810/815 chipset P3's 800MHZ[4setup and +? not]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •