Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Help with Abit TH7II with 2GHz P4




  1. #1
    Join Date
    Dec 2001
    Posts
    10

    Default

    Help! I just finished building a P4 system with a 2GHz chip/TH7II Abit board, and the default CPU on booting reads 800/100MHz! When I adjust the CPU to 2000/133 (with 400MHz RDRAM), it gives me an error 'CPU is unworkable or has been changed. Please recheck - CPU softmenu'. I push F1 and it boots (winxp Prof) no problem. Not sure if it is running 2GHz or how to eliminate the error. Inputs? Additional hardware:

    Leadtec GeForce3
    Soundblaster Audigy
    Linksys 10/100 netork card
    West Dig 60GB HD/Plextor 16/10/40A

    Thanks!

  2. #2
    Join Date
    Nov 2001
    Posts
    4,723

    Default

    That P4 should be at a 100Mhz FSB
    100 X Quad pipeline = 400Mhz for the RDRAM

    DL the Intel Processor Freqency ID Utility after you get running, and see what it says?

    I assume that graphics board is running at AGP 1.5V?

    If not see if this applies to you.

    Hope that maybe helped a little bit
    The reason a diamond shines so brightly is because it has many facets which reflect light.

  3. #3
    Join Date
    Dec 2001
    Posts
    10

    Default

    Downloaded/will try. Graphics card is right voltage/no issue. Had another comment that it should be set at 2000/100MHz (20x multiplier) - will try that as well/get back to you.

  4. #4
    Join Date
    Dec 2001
    Posts
    10

    Default

    Setting the bus freq to 100MHz with 20x multiplier solved it - thanks for your help anyway!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •