Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Oops..there go the pads..




  1. #1
    Join Date
    Mar 2011
    Location
    australia
    Posts
    3

    Default Oops..there go the pads..

    Replacing M61SEMS2 SOIC 8 bios chip I got a bit hamfisted and took off pin 6 and 7 solder pads
    Now I,m not sure I can see where the traces go to them, can anybody help with a circuit diagram?
    Thanks in anticipation

  2. #2
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Oops..there go the pads..

    Ouch, sorry to hear!

    I don't know where you can get a diagram like that, did you try just soldering it into place? I've never had this happen, what happens if the pads are gone, does the pin still not make a connection if soldered into the pad area?

  3. #3
    Join Date
    Mar 2011
    Location
    australia
    Posts
    3

    Default Re: Oops..there go the pads..

    Unfortunately the pads are just glued in place and heat will remove them I cant quite see the trace to them if any on pad 7

  4. #4
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

  5. #5
    Join Date
    Mar 2011
    Location
    australia
    Posts
    3

    Default Re: Oops..there go the pads..

    Oops..there go the pads..-a108-gif Anyone? a picture of pad 6 and 7 trace would be nice

  6. #6
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Oops..there go the pads..

    Maybe contact the manufacturer of the board, they may be able to help you with that.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •