Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: Questions on P67A-UD3P-B3 Rev.




  1. #1
    Join Date
    Jul 2011
    Location
    uk
    Posts
    6

    Default Questions on P67A-UD3P-B3 Rev.

    Hi all at Tweaktown, 1st post here, hope you are well.

    I have some questions regarding my Mobo that I cant seem to find anywhere, firstly I seem to have a small V-droop issue that I think is hampering my O/C, at the moment I have my cpu volts set at 1.32v, yet when I run prime95, hardware monitor shows it @ 1.30v, as soon as I revert back to idle state it bumps upto 1.32v. At the moment it is prime stable at 4.21 ghz, though I would like to get my volts lower to somewhere about 1.28v, but that would mean when under load it would be running at 1.26v, This 0.02v V-droop is annoying me and I am not sure on how to fix this!? In the screenshot you can see what I mean about the V-droop.

    I am also a bit miffed as to the why I cant set the BCLK to 100 manually, when I try to set it via Bios, It shows up as 99.8 even though I set it to 100 and if I leave it on auto it shows at 100.3, Cant really understand how I can get this to operate @ 100? Any help would be greatly appreciated!!

    Questions on P67A-UD3P-B3 Rev.-capture1-jpg

    Also, are these temps ok? ambient temp is prob about 24c-25c and what is the TMPIN0 doing with that high of a temp? Faulty sensor?
    Intel i5 2500k@4.2ghz@1.32v-Talon Attack GTX460 Stock-
    P67A-UD3P-B3 Mobo-4G Xms3 ram@1600-Eco Cool-it Cooler-
    500GB F3-64GB Kingston SSD-650TX PSU-CM690 Window mod

  2. #2
    Join Date
    Jul 2011
    Location
    uk
    Posts
    6

    Default Re: Questions on P67A-UD3P-B3 Rev.

    Sorry guys S/shot a bit small!!

    Questions on P67A-UD3P-B3 Rev.-capture1-jpg

    Edit: still didnt work.........Right click to see size, sorry!!
    Intel i5 2500k@4.2ghz@1.32v-Talon Attack GTX460 Stock-
    P67A-UD3P-B3 Mobo-4G Xms3 ram@1600-Eco Cool-it Cooler-
    500GB F3-64GB Kingston SSD-650TX PSU-CM690 Window mod

  3. #3
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Questions on P67A-UD3P-B3 Rev.

    Can't you set 1.30v for 1.28v under load? Try loadline calibration? There's all different levels to reduce vdroop
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #4
    Join Date
    Jul 2011
    Location
    uk
    Posts
    6

    Default Re: Questions on P67A-UD3P-B3 Rev.

    With This board, LLC can only be enabled or disabled, though I have found that using dynamic Vcore and setting the cpu voltage to normal allows me to adjust the voltage that way, So if I have a normal voltage setting of lets say 1.34, I can use Dynamic V-core to decrease the voltage by 0.06v to give me 1.28v, although this does not eradicate my V-droop completely, it makes it more closer, Now I am I only 0.01v less than my normal voltage of 1.28, So under load it reads as 1.274v as opposed to the normal reading of 1.283v. I think I have gone as far as I can this issue and will live with the small V-droop.

    Edit: Any Ideas on the BCLK issue or is it ok to leave as is?
    Last edited by teejay73; 07-13-2011 at 04:54 PM.
    Intel i5 2500k@4.2ghz@1.32v-Talon Attack GTX460 Stock-
    P67A-UD3P-B3 Mobo-4G Xms3 ram@1600-Eco Cool-it Cooler-
    500GB F3-64GB Kingston SSD-650TX PSU-CM690 Window mod

  5. #5
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Questions on P67A-UD3P-B3 Rev.

    I get vdroop also but I don't bother with llc,I'm clocked through dvid like you and I just up voltage to compensate for vdroop,

    EDIT,I don't know about bclk,does that mb have CPU spread spectrum? Maybe you need to enable it? Or maybe the c power saving states are affecting it?
    Last edited by wazza300; 07-13-2011 at 04:59 PM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  6. #6
    Join Date
    Jul 2011
    Location
    uk
    Posts
    6

    Default Re: Questions on P67A-UD3P-B3 Rev.

    Quote Originally Posted by wazza300 View Post
    I get vdroop also but I don't bother with llc,I'm clocked through dvid like you and I just up voltage to compensate for vdroop,

    EDIT,I don't know about bclk,does that mb have CPU spread spectrum? Maybe you need to enable it? Or maybe the c power saving states are affecting it?
    the mobo dont have CPU spread spectrum, although it may be called something else, anyway not hassled about the BCLK as it was like this at stock and it is only .2 under 100 set manually, if I leave it on auto, bios shows it at 100 but it sets at 103, I read on OCUK that the BCLK for Sandy bridge needs to be set at 100, so I set it at 100 and it shows as 99.8.
    Intel i5 2500k@4.2ghz@1.32v-Talon Attack GTX460 Stock-
    P67A-UD3P-B3 Mobo-4G Xms3 ram@1600-Eco Cool-it Cooler-
    500GB F3-64GB Kingston SSD-650TX PSU-CM690 Window mod

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •