Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Asrock 970DE3/U3S3: Building a computer




  1. #1
    raijoh is offline Junior Member
    Join Date
    Aug 2012
    Location
    Mooresville, NC
    Posts
    3

    Default Asrock 970DE3/U3S3: Building a computer

    So, we've built a computer with everything new, except for the hard drive. On the hard drive, we have Windows XP Service Pack 2 installed.
    When trying to boot up, we get this message:
    Asmedia 106x SATA Controller Ver 0.90 AMCI Mode
    Copyright (C) Asmedia Technologies, Inc, All Right reserved.
    Using PCIE Gen 2
    Can't find any device


    Originally, we could run in safe mode, but now it only blue screens.
    Any ideas?

    Here are the components of the build:
    Motherboard:
    ASRock 960GM/U3S3
    Processor:
    AMD FX 4100
    Graphics Card:
    Nvidia 550ti
    RAM:
    G.Skill Ares 8
    WiFi Adapter:
    Roswill 300 Mbps USB
    Power Supply:
    Thermaltake 600W
    Hard Drives:
    Western Digital 160 gb
    Western Digital 320 gb
    Seagate 160 gb

  2. #2
    Wa†chman's Avatar
    Wa†chman is offline Junior Member
    Join Date
    Jan 2013
    Location
    Earth
    Posts
    4

    Default Re: Asrock 970DE3/U3S3: Building a computer

    I have the same error, and originally got blue screen. The BSOD was from the Windows bootmanager missing. You can
    attempt to repair it, with XP easier than 7, by booting from disk and doing repair, or you can reinstall Windows.

  3. #3
    Join Date
    Mar 2012
    Location
    Columbus, Ohio, United States
    Posts
    41

    Default Re: Asrock 970DE3/U3S3: Building a computer

    Turn off SaTa 3 operation and USB3 operation until you have the drivers installed. It will BSOD until you do. Oh and make sure your Sata mode is in IDE or compatibility mode. AHCI will also give you BSOD.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •