Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 24

Thread: ECS k7s5a mb help




  1. #11
    Join Date
    Sep 2002
    Posts
    44

    Default

    Found the right diagram if anyone else has the same prob
    Still can not understand what the origional diagram is on about
    See attached



    : party ha

  2. #12
    Join Date
    Aug 2002
    Location
    Ohio, USA
    Posts
    1,296

    Default

    The manual you got is the same one for download from ECS. I would guess it is a standard mobo. Just out of curiosity, where did you find the correct pic?

  3. #13
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Well then if that's the case then it is still the same as mine. ;)


  4. #14
    Join Date
    Sep 2002
    Posts
    44

    Default

    Got it at Overclockers Australia forum


    I searched ECS,s Tiawanese website but could not see that diagram anywhere but that site is a shambles

    Is the same as yours Wiggo. Wish it had come with the same manual.




    :thumb: :thumb: :thumb: :thumb: :thumb:

  5. #15
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    There may have been enough alts between the two versions to require a redo of the manual but they certainly stuffed up there. :(

    I only ever used this board for one Athlon setup (PC No.3) and I'm glad of that as the dozen or so others that I used were Duron setups, I had to buy a PSU that cast as much as the board did at the time ($130aus) to get it to work at the rated speed. :eek:
    <center>:cheers:</center>

  6. #16
    Join Date
    Oct 2002
    Posts
    12

    Default

    I also have the same mb..
    but my power LED has 3pins.. so i really don't know where it goes!?!

    i have another problem, it doesn't want to boot up, i've checked 10times all the plugs, everything is in place but it's just doesn't boot!!! i don't hear the beep and can't get into the BIOS....
    One thing that I don't understand is the CD-Rom is running, in fact it never stops as long as I leave the power on!

    I'm all confused.. don't know what to do...
    I just got my mb for 1day! It can't be burned already.. can it?!?

    thanks

  7. #17
    Join Date
    Nov 2001
    Posts
    2,464

    Default

    Quote Originally Posted by nta333
    One thing that I don't understand is the CD-Rom is running, in fact it never stops as long as I leave the power on!
    sounds like you have the ide cable on teh motherboard or the CD drive the wrong way around

  8. #18
    Join Date
    Sep 2002
    Posts
    44

    Default

    Andys on the right track disconnect everthing that isnt 100% reguired to run the machine epescially the CD then retry
    mine had a similiar problem which turned out to be the video card which wasnt fuuly seated in its slot.
    My power LED also has three pins usaully the white cable is negative & green for positive connect as per the connection diagram earlier in this thread good luck & let us know when its all happening

    :cheers:

  9. #19
    Join Date
    Oct 2002
    Posts
    12

    Default

    Yeah I've checked that all is well connect, and i'm pretty sure it is!

    I tried to unplug everythin, including the keyboard and the video card, so it should beep 34-times.. but i heard no beeping at all!

    I'm so desperate, I'm running out of ideas...:( :( :(

  10. #20
    Join Date
    Sep 2002
    Posts
    44

    Default

    Have you tried to reset the CMOS/?

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •