Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: P7N2 - 790i - C2D - stock voltages / overclocking experience?




  1. #1
    Join Date
    Aug 2013
    Location
    Germany
    Posts
    1

    Default P7N2 - 790i - C2D - stock voltages / overclocking experience?

    Hello everyone.
    After using my P7N2 Diamond with a stock E8200 @ 2.66 Ghz for years now, I want to give overclocking a shot before building up a completely new system. I tried it a few times now but always failed.

    First of all, my system:
    Mainboard: MSI P7N2 Diamond
    RAM: 2x TeamGroup Inc TED 34096M DDR3 1333 MHz Elite CL 9-9-9-24 (rated at 1.5V)
    Cooling: Scythe Ninja 2 with 120mm fan
    CPU: E8200 C0 @2.66 GHz

    I read about the basics of overclocking and tried to set as many voltages to a "default" value as possible. In a thread about oc'ing a EVGA 790i board a person wrote, that he left almost all values on [auto] since the board wouldn't increase them randomly but moderate without that much risk. Does this apply to the MSI board aswell?

    So this are the options for setting the voltages in the BIOS:

    D.O.T. Control (1 - 15%) [disabled]
    Intel EIST [disabled]
    System Clock (Auto, Linked, Unlinked) [unlinked]
    Adjust DRAM Frequency
    Adjust CPU Ratio [Speedstep technology must be disabled]
    DRAM Timing Mode (Auto / Manual)
    PCI-E Frequency (100-200 Mhz)
    MCP PCI-E Frequency (100-200 Mhz)
    CPU Voltage 0,0125 - 0,3875
    DRAM Voltage (V) 1.50 V - 2.40 V
    SB Voltage (V) 1.525 V - 2.000 V
    NB Voltage (V) 1.225 V - 1.600 V
    PCI Expander PLL Voltage 2.551 V - 3.265 V
    DIMM Memory Reference Voltage 0.485 V - 1.200 V
    Memory Terminator Voltage 0.485 V - 1.200 V
    CPU GTL Reference Voltage 0.779 V - 0.827 V
    NB GTL Reference Voltage 0.709 V - 0.831 V
    FSB Terminator Voltage 1.056 V - 1.313 V
    SB Sleep Mode Voltage 1.374 V - 1.660 V
    Spread Spectrum (Enable / Disable) [disabled]
    Excetute Bit Support [disabled]
    HPET [disabled]

    First of all, I tried to get a stable build witout [auto] voltages, but I failed to get it stable.
    I set the DRam Voltage to 1.5V and set the timings to 9-9-9-24 T2, the other timings are on auto.
    System Clock unlinked
    DRam Clock 1333 MHz
    CPU Clock 1333 MHz
    CPU Voltage +0.025
    SB Voltage 1.525
    NB Voltage 1.35
    PCI Expander PLL Voltage 2.551
    FSB Terminator Voltage 1.056
    Everything else on auto

    If I increase the CPU Clock a little, the PC doesn't boot anymore.
    And to be honest, I am not sure if those values are okay or not for a basis. Looks like there are only a few 790i MSI boards out there because I couldn't find good reference values.
    Tried playing around with some of those values but didn't get very far. Once I managed the PC to boot but then the Ethernet had trouble, I guess not enough NB voltage? On another instance my system freezed while running prime95 large.

    I would appreciate some help with overclocking this board.
    Is it safe to keep the PLL and the FSB Voltage on Auto? Can anybody suggest some stable stock values for the SB and NB? Not sure where I should begin.

    There is also a thing I was wondering about: In your TT review of the P7N2, you mentioned the following for PLL and VTT:

    "PCI Expander PLL Voltage: -63 to 80 in Various Increments"
    "FSB Termination Voltage: -80 to 63 in Various Increments"

    If I compare this with what my mainboard gives, it's completely different:

    PCI Expander PLL Voltage 2.551 V - 3.265 V
    FSB Terminator Voltage 1.056 V - 1.313 V

    The PLL voltage is giving me a huge headache.. on no other 790i board I read about, that voltage is supposed to be that high..

    Is it safe to keep those two voltages on Auto? Sadly the bios won't show me the current values..
    I tried contacting MSI Germany for some reference values for the PLL and the VTT but sadly I got no answer yet. Looking at search results, it looks like the board didn't sell that well. :S

    So, any MSI 790i expert out there? :]
    Last edited by kadney; 08-10-2013 at 12:15 AM.

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: P7N2 - 790i - C2D - stock voltages / overclocking experience?

    There few if any MSI motherboard posts our forum.
    Try the MSI HQ Users-to-Users Forum - Index
    You should post in their Overclocking, Undervolting forum.

    The MSI user to user forum is excellent and has some very experienced members.
    Good luck and let us know if they are able to help you.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •