Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0




  1. #1
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    hello .. i have problem using new psu with my asrock g41m-vs3 r2.0 / its need power supply atx v1.0 with 20 or 24 pin with number 18 white wire for -5v / i buy power supply and it didnt work - its used yes but the owner test it in many mothers / i buy another not sheap one and didnt work too then i know that thay are atx v2.0 no whit -5v - just the power led work but no boot / for my luck nothing wronge happen when I bought the display card ( gigabyt gt 610 ) just 29 watt also my cpu e8400 not need mush power - 4g ddr3 ram - 2 hard disks >> for sure i cant upgread to more watt display card and i cant put the new cpu quad 9650 and another 4 giga ram coz the old working psu 250 watt
    now 2 power supplys and another ram and cpu in Office Drawer .. any converter i can use or something ?
    Sorry for the mis- language .......

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,812

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    Welcome to the forum.

    Did you connect the square 4-pin ATX_12V power supply cable to the motherboard?

    Your system will not boot if you forget to plug in this cable.

    The ATX_12V has a square connector that is not attached to other power supply cables.

    The mothherboard's ATX_12V connector for this cable is near the upper right corner in the picture.

    Page 23 in your motherboard user manual has additional information for the ATX_12V and 24-pin power supply cables.

    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    parsec's Avatar
    parsec is offline Senior Member
    Join Date
    Jun 2012
    Location
    Third stone from the sun
    Posts
    4,824

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    Your board does not need a -5V connection to work. It is not that old, -5V was in the original ATX specification for PC power supplies. The -5 V rail was provided for peripherals on the ISA bus, but was not used by the motherboard. Something else is causing your problem.

    The -5V white wire was in pin 20 of the 24 pin connector, pin 18 of the 20 pin connector.

    how can i use new power supply for that mother boread asrock g41m-vs3 r2.0-atx-psu-24-pin-png

  4. #4
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    thanks alot for replys ...
    Did you connect the square 4-pin ATX_12V power supply cable to the motherboard?
    yes i do - i know i must do that ....
    Your board does not need a -5V connection to work.
    i think it need that in
    manual thay say that
    ATX Power Connector (ATXPWR1)
    and i search and know that its mean atx v1.0 with -5v needed
    all the new psu not have that -5v wire and just old of them and very low watt ...
    i hope it some thing i can do in bios .....
    i see video some one Puts plugged between the green wire and the black wire While connecting to the motherboard and its turn on - and he say must do that evry time wanna turn on the computer ...

  5. #5
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    how can i use new power supply for that mother boread asrock g41m-vs3 r2.0-1308304682-jpg

  6. #6
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    how can i use new power supply for that mother boread asrock g41m-vs3 r2.0-enermaxliberty500w_atxconnection-jpg

  7. #7
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    how can i use new power supply for that mother boread asrock g41m-vs3 r2.0-1308304665-jpg

  8. #8
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    omg - i get a 3rd psu with that wire (-5v ) and its just the green led but no boot .

  9. #9
    Join Date
    Feb 2015
    Location
    Egypt
    Posts
    7

    Default Re: how can i use new power supply for that mother boread asrock g41m-vs3 r2.0

    in the manual pdf there is 2 jumbers thay used to some stuff in saving power and that was the defult - so there was aproblems with the PSs the jumbers was in front audio and lan stages - not in power area in the mother board - that why it was hard to me to fount the problem - i change the jumber and it work gread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •