Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: P3b-f Mobo




  1. #1
    Join Date
    Jan 2003
    Posts
    1

    Default

    :snip:

    I have a P3b-F mobo

    It had a power surge which fried the hdd and the power supply that I can tell.

    replaced the power supply video hdd ram with good stuff but no matter what I try I still can't see or access the cmos/bios

    I am getting error codes!!!!!!!!!

    1 llong 1 short

    It has an award chip

    pdf manual is hundreds of useless pages long.

    How do I reset the cmos/bios

    Please don't suggest floppy i can't get that far.

    Is the mobo fried?

    I have a green led no blinking on the mobo.

    the only thing I haven't replaced is the CPU its a slot1

    My understanding of award bios beep error codes is that it is usuallly ram or video errors that will set it of.:cheers:

  2. #2
    Join Date
    Dec 2001
    Posts
    320

    Default

    there is ussually a clear CMOS jumper on the board somewhere, i dont have the manual so i cant tell u where it is exacly but this is what i found about the error codes hope this helps this info came from my mobos manual the p3v4x same bios

    Beep - Currently the only beep code indicates that a video error has occurred and the BIOS cannot initialize the video screen to display any additional information. This beep code consists of a single long beep followed by two short beeps. Any other beeps are probably a RAM problem

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •