Well finally got my IC7 setup with my new 9600PRO and here's some benchmarks for you guys :)

=================================================
2.4C | SL6WF | Costa Rica | Batch: 3312A396 | Pack date 05/12/2003
MCX4000 + 120x35mm Sunon 120cfm fan connected to TT fan speed controller
128MB Gigacube 9600PRO @default with ATI cat 3.5 drivers and control panel
120GB WD 8mb 1200JB connected to IDE1
Netgear GA302T Gigabit NIC (rev B1)
520W Topower Gold Triple Fan PSU
WinXP PRO SP1 with DX9.0

=================================================
Abit IC7 rev 1.0 with 15 bios
vcore: 1.525v
vdimm: 2.8v
vAGP: 1.55v
AGP/PCI: Fixed 66/33
NB Strap: 800FSB

Game Accelerator: Auto
Refresh Cycle Time: Auto
Read Delay Adjust: Auto
Read Delay: Auto
Command Per Clock: Auto

PCI Latency: 64
SATA: disabled
Firewire: disabled
=================================================

CPU: DDR ratio = 1:1

2x 256MB OCZ PC3700 Gold Dual Channel @233mhz 2-3-3-7

Room Temp: 23-24C

Aida32 3.70 SPD reading

CPUZ & Winbond Doctor Temps @ idle

Sandra Max buffered memory = 5536 / 5545
Sandra Max unbuffered memory = 3149 / 3186

PCMark2002 = 6919 / 9844 / 1134

Aida Read = 5423 MB/s
Aida Write = 1772 MB/s

3dmark2001SE = 12,159
3Dmark2003 = 3462

Sandra MAX3 CPU = 8707 / (2305/5298)
Sandra MAX3 CPU Multimedia = 12930 / 19792

Sciencemark = 4721.53 MB/s

SuperPi 1m = 48s
SuperPi 16m = 19min 28s

Prime95 v23.4 Bench = 71.06s

Codecreatures
Total
Av frames/s = 24.7
max frams/s = 32
Av polys/s = 8.9 mio
max polys/s = 12.6 mio
total amount of frames =3231

GL Excess 1.2b
800x600@32 = 11,451
1024x768@32 = 8,548
1280x1024@32 = 6,679

CPU Burn In 1.01 + Prime95 v23.4 + StressCPU

=================================================