Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: max FSB




  1. #1
    Join Date
    Aug 2003
    Posts
    62

    Default

    What is the highest i can safely set my FSB without screwing anything up since I cant lock the PCI/AGP bus with my current motherboard?

  2. #2
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default

    Hard to say as there are too many variables to give you a reliable answer. But considering that I have a system with that very board in it, I can say for fact that if you go too far and the system locks you out, the jumper that resets the CMOS values works very well. :D
    Old age and treachery will overcome youth and skill
    My Toys

  3. #3
    Join Date
    Aug 2003
    Posts
    1,790

    Default

    Try going straight to 166, a new divider will kick in to keep your system in spec...if it doesnt boot up the vcore a bit, and make sure your FSB/DDR ratio is set right so your RAM isn't being pushed too far.

    FX5900 - 3DMark2001 [20,566] - 3DMark2003 [7,281] - Aquamark3 [56,694]
    Ti4400 - 3DMark2001 [16,028]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •