Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: must...go...faster....!!!




  1. #1

    Default

    ok well i got my p4c up to 3.33ghz wtf fsb at 275mhz...i got a p4p800Delux, anyway to OC the proc anymore? i couldnt find a way to change the fsb to 5:4 or anything but i wana make it go faster, i got watercooling and its barly even warm...
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  2. #2
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Just remember that ya FSB is quad pumped so the effective data rate that ya now runnin' is 1100MHz.

  3. #3
    Join Date
    Sep 2003
    Posts
    175

    Default

    where in the bios did you find the ratio settings at?
    ASUS P4S800 motherboard
    P4 2.4ghz 800mhz fsb HT @ 2.84
    geiL 512 PC3200 RAM
    80GB 7200RPM HDD
    PowerColor Radeon 9600XT
    Sound Blaster Audigy 2
    Creative Inspire 6.1 6600 speakers
    Dell Sony P1110 21'' monitor

  4. #4
    Join Date
    Aug 2003
    Posts
    1,790

    Default

    DDR Frequency

    400 - 1:1
    320 - 5:4
    266 - 3:2

    FX5900 - 3DMark2001 [20,566] - 3DMark2003 [7,281] - Aquamark3 [56,694]
    Ti4400 - 3DMark2001 [16,028]

  5. #5

    Default

    lol DDR freq. doesnt do a thing man, wether i have auto, 400, 320, or 266 my cpu is at 3.2+/- fsb at 1080+/-
    what i relly wana do is get the fsb up to like 1100 (watercooled chipset) and cpu at like 3.5-3.8ghz (or higher?) (watercooled also). I GOT CORSAIR xms PC4000 RAM (2.5-4-4-8). anyway i can get the cpu speed up without the fsb going up? i cant push the fsb up past 275mhz(4x pumped) but if i tweak with voltages a bit i might be able to...havent played with it alot yet.
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  6. #6
    Join Date
    Aug 2003
    Posts
    1,790

    Default

    I don't think you understand....

    The DDR Frequency changes the frequency that your RAM runs at in ratio to your FSB. If you don't understand how this works, run this at the different settings and you will see what I mean.

    http://www.cpuid.com/cpuz.php

    Examples:

    250FSB, 1:1 Ratio, results in 250mhz memory frequency, or DDR500.

    250FSB, 5:4 Ratio, results in 200mhz memory frequency, or DDR400.

    250FSB, 3:2 Ratio, results in 167mhz memory frequency, or DDR333.

    A 2.4c CPU at the above values would run at 3.0ghz / 1000mhz system bus. The system bus is simply FSB x 4.

    To run 1100mhz system bus, you need a FSB of 275. That's it. That would put your CPU at 3300mhz.

    FX5900 - 3DMark2001 [20,566] - 3DMark2003 [7,281] - Aquamark3 [56,694]
    Ti4400 - 3DMark2001 [16,028]

  7. #7

    Default

    thanx for the link but i got it already(thats how i knew specks) i just relly wana crank up the cpu speed (to test limits) without dicking with ram relly, cust to see how far the cpu can go. i know the rams limited at 275ish+/- (with any decent cas.)
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

  8. #8
    Join Date
    Aug 2003
    Posts
    1,790

    Default

    You have to use the divider to slow your RAM down when it reaches a point where it cannot go any farther.

    If you run into a wall, you have to switch to 5:4 to keep going, your RAM can't handle going that high.

    FX5900 - 3DMark2001 [20,566] - 3DMark2003 [7,281] - Aquamark3 [56,694]
    Ti4400 - 3DMark2001 [16,028]

  9. #9
    Join Date
    Sep 2003
    Posts
    175

    Default

    man i hate my life the only memory ratio options i have are auto, 333 (5:4 i guess) and 400 (1:1 i guess)
    ASUS P4S800 motherboard
    P4 2.4ghz 800mhz fsb HT @ 2.84
    geiL 512 PC3200 RAM
    80GB 7200RPM HDD
    PowerColor Radeon 9600XT
    Sound Blaster Audigy 2
    Creative Inspire 6.1 6600 speakers
    Dell Sony P1110 21'' monitor

  10. #10

    Default

    well after a exhausting overclocking session (about 3 hours worth) i learned that in bios when i change the fsb ratio it doesnt change what wcpuid tells me, its always 3060-3333mhz cpu and 1050-1100bus i tried setting the ddr to 333 and 266 with no change in reorted specks. also i have all my voltages on auto is that the best? i got pc4000 ram(ddr500) XMS series, good ****, it can go to 300fsb but i think its the cpu thats dieing at that speeds, i dont know how to tell...lol, all i can say is sometimes windows crashes at that speed sometimes it doesnt, so i know its not stable, im trying to find the weak link:thumb:
    2.4 p4c @3.06 1020mhz fsb
    ASUS P4C800Delux
    CORSAIR ddr500 XMS (3-4-4-8)
    maxtor 120gb w/8meg cache (raid0)
    2x WD Raptors (Raid0)
    2x120Gb Maxtor's
    Ti4200 363/667 mhz
    Water-cooled Koolance case

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •