Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: My Cpu overclocked or not?




  1. #1
    Join Date
    Jun 2003
    Posts
    11

    Default

    :confused: Hello my friends...i have a pentium 4 2.4 ghz cpu i overclocked it too 3.0 and my cpu temps didnt change at all, as u can see in the pic that i attached to this thread its 21c/69f....did it really over clock, o and another question when i raise the voltage on my cpu what am i realy doing 2 it?....thanks:shoot3:

  2. #2
    Join Date
    Jun 2003
    Posts
    11

    Default

    grrrr.....im havin a problem uploading the pic

  3. Default

    Use Sandra SiSoft from www.guru3d.com
    or CPUZ from www.cpuid.com
    or just right click on My computer and see what Ghz Windows is giving you udner Properties.
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  4. Default

    Volatge increase is exactly what it says, increasing the coltage running through the chip. This increases heat output, but can make a chip run more stable in an overclocked enviorment. A better explanation can be found in our overclocking guides here at TT.
    The FatGuy's Rig:

    <small>AMD 1600+ XP O/C'd to 1560 mhz // Thermaltake Volcano 7+ // Aopen AK77 Pro K266(A) Chipset O/C'd to 147 mhz // 256MB Elixir PC2100 DDR CAS2 // Visiontek GeForce4 Ti4200 O/C'd to 310/580 w/ Thermaltake HSU // SoundBlaster Audigy X-Gamer // WD205BA 20GB 7200 // Sony 52x/24x/52x // Linksys 10/100 NIC // ThermalTake 480w Butterfly PSU // Silver Windowed Aluminum Mid-Tower Case (Modded) // Vantec Nexus Fan Controller// Thermaltake 80mm Blower // 3xEvercool 80mm Fans // 2xBlue Cold Cathodes // 2xSound activated Blue Cold Cathodes // Dell 17" Monitor // Microsoft Trackball // Creative 5.1 Speakers</small>

    Come Crunch with TweakTown

    <img src="http://www.statgfx.com/statgfx/folding/?&username=FatGuy3&border=0,0,0&custom =0,0,255&label=0,0,0&header=255,0,0&st ats=0,0,255&trans=yes&template=fah_origina l&.jpg" alt="www.Statgfx.com" />

  5. #5
    Join Date
    Jun 2003
    Posts
    11

    Default

    i right clicked my computer and went to the properties and is say pentium 4 2.4ghz, but i used cpuz and it say 3006.81mhz....

  6. #6
    Join Date
    Jan 2004
    Posts
    18

    Default

    check your cpu temps in bios after 1 hour of running

  7. #7
    Join Date
    Aug 2003
    Posts
    1,790

    Default

    Tell me, how high did you set the voltage?

    It should not need an increase at all to reach 3.0 stable.

    My temps didn't increase either, but yours is certainly not 21c unless you are in a room that has approx. a 0c ambient temp, aka Igloo.

    FX5900 - 3DMark2001 [20,566] - 3DMark2003 [7,281] - Aquamark3 [56,694]
    Ti4400 - 3DMark2001 [16,028]

  8. #8
    Join Date
    Jun 2003
    Posts
    11

    Default

    wut voltage should i set it to? on defualt its 0.0875...

  9. #9
    Join Date
    Aug 2003
    Posts
    1,790

    Default

    No, on default its 1.525v.

    FX5900 - 3DMark2001 [20,566] - 3DMark2003 [7,281] - Aquamark3 [56,694]
    Ti4400 - 3DMark2001 [16,028]

  10. #10
    Join Date
    Jun 2003
    Posts
    11

    Default

    hmmm well my mobo saying that, 0.0875 is the default, my mobo is gigabyte 8IPE1000 PRO, if it is wut u say wut should i change it to, i decided to lower my cpu speed too 2.8

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •