Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: In need of OC info




  1. #11
    Join Date
    Jun 2004
    Location
    Orillia Ontario Canada
    Posts
    10

    Default

    Here is my MOBO info

    Processor:
    Supports Socket 478B processors for Intel Pentium 4 (mPGA478) package processors. Supports 400M/533/800MHz System Bus Frequency.

    Chipset:
    VIA PT800 Memory Controller Hub (MCH) VIA 8237 South Bridge.

    Jumperless:
    Supports Jumperless Function by BIOS SETUP-allows user to easily change the CPU Frequency Setting.

    Expansion Slots:
    Five 32-bit PCI Bus Master Slots
    One AGP 8X Slot

    System Memory:
    3 x 184-pin DDR Module Socket support DDR266/DDR333/DDR400 DDR SDRAM up to 12.0GB System memory.

    On Board IDE:
    Supports 2 X IDE Connectors for up to 4 IDE Drives
    Supports PIO Mode 3 and Mode 4 and Bus Master IDE DMA, Mode 4 Timing for up to 16M Bytes/s
    Supports UTRA DMA-133 Bus Master IDE, Provide faster transfer rate up to 133M Bytes/s
    Supports LS-120 / ZIP Device

    On Board LAN:
    Standard MII interface to external PHYceiver
    10/100MHz full and half duplex operation

    OnBoard 3D Audio:
    Software Audio Controller With On Board 6-Channel CODEC Compliant to AC97'
    Supports 3D Surround & Positioning, Full Duplex

    On Board Ultra I/O On Board Winbond Chipset:
    On Board Winbond Chipset
    2 X Serial Ports (16550 Fast UART Compatible)
    1 X Parallel Port (EPP and ECP capabilities)
    1 X Floppy Disk Connector (Supports 2 Floppy Drivers)
    1 X PS2 Mouse Connector
    1 X Keyboard Connector
    3 X Three Wire FAN Connector (Include CPU FAN)
    1 X LINE IN / LINE OUT / Microphone Connector
    1 X Game Port Connector (Support Two Joysticks)
    2 X Analog Audio CD Music line Connectors (different connector)
    1 X Standard IR Connector (Infrared)

    OnBoard Serial ATA:
    Supports 2 Serial ATA Port provide 150MB/s (Max.) Data transfer rate
    Supports RAID 0, RAID 1 function

    OnBoard USB:
    6 X USB2.0 Ports Connector
    Supports USB Keyboard & USB Mouse

    Power Saving:
    ACPI/APM Power Management
    Modem Ring remote wake up
    RTC Alarm Wake up
    Supports Software Suspend & Power off
    Support Suspend to DISK
    Wake on LAN For OS
    Supports Auto Power ON After Power Fail Function
    Supports Keyboard Password / Hot-Key / Any Key Power on Function
    Supports PS2 Mouse Button Click Power On
    Supports Keyboard98 Power on Function
    Supports Power Button Ride (Instant off or Delay 4 second power off)
    Power Fail Recovery support

    Power Supply:
    Supports 20-pin ATX power supply (ATX-PW)

    Bios:
    Award BIOS, Supports Green function, Plug and Play Function
    2MBit Flash ROM

    Dimension: ATX Form Factor with 30.5cm X 21.0cm

  2. #12
    Join Date
    Jun 2004
    Location
    Orillia Ontario Canada
    Posts
    10

    Default

    I am running the 2 Back and 2 Front 80mm Fans pushing air into the case
    they have filters on them to slow the dust buildup and the side panel fan
    is pushing the air out so I can get circulation. The CPU fan is pushing 49CFM. Will this keep my pc cool or should I change my Fan setup better?

    Will I need a fan for my MOBO Chipset?

  3. #13
    Join Date
    Apr 2004
    Location
    Australia
    Posts
    1,525

    Default

    Quote Originally Posted by HaZarD SFD
    I am running the 2 Back and 2 Front 80mm Fans pushing air into the case
    they have filters on them to slow the dust buildup and the side panel fan
    is pushing the air out so I can get circulation. The CPU fan is pushing 49CFM. Will this keep my pc cool or should I change my Fan setup better?

    Will I need a fan for my MOBO Chipset?
    Your front and side fans should all be intakes while the rear fans are spose to be exhausts.

  4. #14
    Join Date
    Jun 2004
    Location
    Orillia Ontario Canada
    Posts
    10

    Default

    ok thanks ill do that!

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •