Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: Need help overclocking....




  1. #1
    Join Date
    May 2002
    Posts
    1

    Default

    Im running my 800 at 900 rite now, and its very stable. I would like the reach 1 Ghz, but the multiplier is locked at 6x so I can only adjust the FSB. My problem is that im using PC-133 RAM and since i've already set my FSB to 150, is it safe to go further?
    Another thing is that its not the highest quality RAM and it only runs at 133 in CLU3. The CPU and Mobo temps are all in check and its safe to say that heat isn't really a big concern for me..Please give me some suggestions.
    Thanks in Advance

    System Specs:
    PIII 800EB Mhz
    Asus CUV4X Mobo
    256Mb SDRam
    Geforce2 GTS 32MB
    SB Live! Value

  2. #2
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default

    Though it is theoretically possible, it is pretty unlikely that you'll do any damage to your components by pushing the system to a higher speed. I know that when I go too far, my system won't boot, or it will POST and then fail to load Windows. From there, I just reset the jumper to default settings and start over again, but a little lower this time.
    Old age and treachery will overcome youth and skill
    My Toys

  3. #3
    Join Date
    Mar 2002
    Posts
    1,166

    Default

    I think you should be able to reach 1ghz fairly easily...unless your RAM can't handle the high FSB, in which case you might consider purchasing pc150 RAM but then again it might not be worth it anyway.
    <Insert Witty Comment Here.>

  4. #4
    Join Date
    Dec 2001
    Posts
    1,297

    Default

    Still, most PIII's don't seem to go much higher than about 150. Highest I've ever been able to do on one. (partially a board limitation)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •