Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: EP45-Extreme E6850 need bios setting to overclock till 4GHz




  1. #1
    Join Date
    Dec 2008
    Posts
    16

    Default EP45-Extreme E6850 need bios setting to overclock till 4GHz

    Hi,

    I need some assistance from OC pro to getting back to 4.0Ghz. I seem to be stuck at 3.7Ghz stable, and I'm not too sure what to do.

    Here are my relevant system specs:
    Gigabyte EP-45Extreme Intel Core 2 Duo E6850
    2x2GB Patriot PVS24G8500ELKR 2 VIPER DDR-2 1066 (PC28500)5-5-5-15
    2x Sapphire Radeon HD4850 512MB 256BIT GDDR3 Graphic Card
    Zalman CNPS9700 LED Ultra silent CPU cooler Corsair HX620W Power Supply
    And current BIOS settings:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ..................: [Fast]
    CPU Clock Ratio ..............................: 9
    Fine CPU Clock Ratio.........................: [Auto]
    CPU Frequency ...............................: 3.70Ghz (411 FSB x 9)


    Clock Chip Control
    Standard Clock Control CPU Host Clock Control...................: [Manual]
    CPU Host Frequency (Mhz) .............: [Manual]
    PCI Express Frequency (Mhz) ..........: [100]


    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: 800 PCI Express Clock Drive.................: 900 CPU Clock Skew (ps)....................: 50
    MCH Clock Skew (ps)....................: 150

    DRAM Performance Control
    Performance Enhance....................: [STANDARD]
    Extreme Memory Profile (X.M.P.)........: Disabled
    (G)MCH Frequency Latch.................: [Auto]
    System Memory Multiplier ..............: [2.00D]
    Memory Frequency (Mhz) ................: [822]
    DRAM Timing Selectable ................: [Auto]

    Standard Timing Control
    CAS Latency Time..........................:5tRCD ...........................................:5tRP'. ............................................: 5tRAS............................................: 15
    Advanced Timing Control
    tRRD............................................:4 tWTR.......................................... :6tWR............................................. :8tRFC............................................ :62
    tRTP...........................................:5 Command Rate (CMD) ....................:2

    Channel A
    Static tRead Value.........................10 tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:10
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    Voltage Type.………... Manual
    CPU
    CPU Vcore….……….........................: 1.45v (default 1.35v)
    CPU Termination…..... 1.200V*.......: 1.50v
    CPU PLL…………………....1.500V*.......: 1.60v
    CPU Referen.…………....0.755V*.......: Auto
    CPU Reference2………,,0.800V*.......: Auto

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.28v
    MCH Reference….…….0.800V...........: Auto
    MCH/DRAM Ref.…......0.900V...........: Auto
    ICH I/O……………….....1.550V............: 1.60v
    ICH Core…………...……1.100V............: Auto

    DRAM
    DRAM Voltage ……....1.800V............: 2.1v
    DRAM Termination .…0.900V............: Auto
    Channel A Reference 0.900V............: Auto
    Channel B Reference 0.900V............: Auto

    Advanced Settings
    Limit CPUID Max. to 3.....................: disabled
    No-Execute Memory Protect............: disabled
    CPU Enhanced Halt (C1E)................: disabled
    CPU Thermal Monitor 2(TM2) ...........: enabled
    CPU EIST Function.........................: disabled
    Virtualization Technology................: enabled (I use VMware)
    Let me know if you need me to change anything else.

    Thanks!
    <!-- / message -->

  2. #2
    Join Date
    Jan 2009
    Posts
    11

    Default Re: EP45-Extreme E6850 need bios setting to overclock till 4GHz

    You need more volt on mch since you use 2x2 set and try 2.00B instead for 2.00D=)

    Try and sett down the multi so you can check if the cpu stop you( i dont think it is so:P)

    And this mobo can be little tricky, but just dont give up;)
    Last edited by Farmasøyten; 01-03-2009 at 10:29 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •