Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: q9550 & ud3p @3.8Ghz freezes randomly




  1. #1
    Join Date
    Dec 2008
    Posts
    53

    Default q9550 & ud3p @3.8Ghz freezes randomly

    help please....

    so my system freezes with no ahead note ... i'm o.c. @3.8 and my
    system is :

    GA-EP45-UD3P (rev1.0/F6) & Q9550 @ 3.8Ghz (AC freezer 7 pro)
    4GB DDR2 800mhz OCZ EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    Vista x64


    settings are :
    ******Motherboard Intelligent Tweaker (M.I.T.)******

    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 3.8GHz............................[ 475 x 8.0 ]

    ******Clock Chip Control******

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 475 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2 [Disabled]

    ******Advanced Clock Control******

    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]

    ******DRAM Performance Control******

    Performance Enhance.............................[Standard]
    (G) MCH Frequency Latch.........................[ AUTO]
    System Memory Multipler.........................[ 2.00D]
    Memory Frequency 800............................[ 950]
    DRAM Timing Selectable..........................[ Manual]

    CAS Latency Time................................[ 5]
    tRCD............................................[ 5]
    tRP.............................................[ 5]
    tRAS............................................[ 15 ]

    ******Advanced Timing Control******

    tRRD............................................[ 4 ]
    tWTR............................................[ 4 ]
    tWR.............................................[ 5 ]
    tRFC............................................[ 55 ]
    tRTP............................................[ 4 ]
    Command Rate (cmd)..............................[ 2 ]

    ******Channel A Timing Settings******

    Static tRead Value ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment ................[ Auto ]
    tRD Phase2 Adjustment ................[ Auto ]
    tRD Phase3 Adjustment ................[ Auto ]

    tRD 2rd (Differnt Rank) ................[ Auto ]
    tWR 2wr (Differnt Rank) ................[ Auto ]
    tWR 2rd (Differnt Rank) ................[ Auto ]
    tRD 2wr (Same/Difft Rank) ................[ Auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel A Driving Settings******

    Drive Strength Profile..........................[ 800MHZ ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Channel B Timing Settings******

    Static tRead Value ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment ................[ Auto ]
    tRD Phase2 Adjustment ................[ Auto ]
    tRD Phase3 Adjustment ................[ Auto ]

    tRD 2rd (Differnt Rank) ................[ Auto ]
    tWR 2wr (Differnt Rank) ................[ Auto ]
    tWR 2rd (Differnt Rank) ................[ Auto ]
    tRD 2wr (Same/Difft Rank)................[ Auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel B Driving Settings******

    Drive Strength Profile..........................[800MHZ]
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Motherboard Voltage Control******

    Load-Line Calibration...........................[ disable ]
    CPU Vcore [ 1.21250 ]...................[ 1.28125V ]
    CPU Termination [ 1.20 ]...................[ 1.240V ]
    CPU PLL [ 1.50 ]...................[ 1.590V ]
    CPU Reference [ 0.760 ]...................[ 0.785V ]

    MCH Core [ 1.100 ]...................[ 1.22V]
    MCH Reference [ 0.760 ]...................[ 0.825V ]
    MCH/DRAM Refernce [ 0.900 ]...................[0.9V ]
    ICH I/O [ 1.500 ]...................[ 1.57V ]
    ICH Core [ 1.100 ]...................[ 1.2V]

    DRAM Voltage [ 1.800 ]...................[ 2.1V]
    DRAM Termination [ 0.900 ]...................[0.9V]
    Channel A Ref [ 0.900 ]...................[ 0.9V]
    Channel B Ref [ 0.900 ]...................[0.9V]
    every test i run .. prim95/OCCT/intelburntest and memtest 12hrs run pass... there is no crash log/dump file or noting else i could analyze in the eventView... just freeze (that was restart before i disabled the auto restart ).


    mostly those freezes happens at night when i'm not around but today for the first time it happend when i was just fastfwarding a movie in mediaplayer classic (not an HD movie even).

    please help me resovle this annoying thing ... 10x in advance
    ==================
    GA-EP45-UD3P & Q9550 @ 3.8Ghz
    4GB DDR2 OCZ
    EL Platinum XTC Dual Channel
    620W CORSAIR CMPSU-620HX
    Sapphire Radeon HD4870 toxic 512MB
    Creative X-Fi Titanium 7.1 PCI-E‎
    win7 x64

  2. #2
    Join Date
    Mar 2009
    Posts
    56

    Default Re: q9550 & ud3p @3.8Ghz freezes randomly

    ******Motherboard Intelligent Tweaker (M.I.T.)******

    Robust Graphics Booster.........................[ Auto ]
    CPU Clock Ratio.................................[ 8 ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 3.8GHz............................[ 475 x 8.0 ]

    ******Clock Chip Control******

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 475 ]
    PCI Express Frequency (Mhz).....................[ 100 ]
    C.I.A 2 [Disabled]

    ******Advanced Clock Control******

    CPU Clock Drive.................................[ 800mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 0ps ]

    ******DRAM Performance Control******

    Performance Enhance.............................[Standard]
    (G) MCH Frequency Latch.........................[ AUTO]400
    System Memory Multipler.........................[ 2.00D]
    Memory Frequency 800............................[ 950]
    DRAM Timing Selectable..........................[ Manual]

    CAS Latency Time................................[ 5]
    tRCD............................................[ 5]
    tRP.............................................[ 5]
    tRAS............................................[ 15 ]

    ******Advanced Timing Control******

    tRRD............................................[ 4 ]Auto
    tWTR............................................[ 4 ]Auto
    tWR.............................................[ 5 ]Auto
    tRFC............................................[ 55 ]Auto
    tRTP............................................[ 4 ]Auto
    Command Rate (cmd)..............................[ 2 ]

    ******Channel A Timing Settings******

    Static tRead Value ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment ................[ Auto ]
    tRD Phase2 Adjustment ................[ Auto ]
    tRD Phase3 Adjustment ................[ Auto ]

    tRD 2rd (Differnt Rank) ................[ Auto ]
    tWR 2wr (Differnt Rank) ................[ Auto ]
    tWR 2rd (Differnt Rank) ................[ Auto ]
    tRD 2wr (Same/Difft Rank) ................[ Auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel A Driving Settings******

    Drive Strength Profile..........................[ 800MHZ ]1066
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Channel B Timing Settings******

    Static tRead Value ...............[ 9 ]
    tRD Phase0 Adjustment ................[ Auto ]
    tRD Phase1 Adjustment ................[ Auto ]
    tRD Phase2 Adjustment ................[ Auto ]
    tRD Phase3 Adjustment ................[ Auto ]

    tRD 2rd (Differnt Rank) ................[ Auto ]
    tWR 2wr (Differnt Rank) ................[ Auto ]
    tWR 2rd (Differnt Rank) ................[ Auto ]
    tRD 2wr (Same/Difft Rank)................[ Auto ]

    Dimm 1 Clock Skew Control.......................[ Auto ]
    Dimm 2 Clock Skew Control.......................[ Auto ]
    DDR Write Training..............................[ Auto ]

    ******Channel B Driving Settings******

    Drive Strength Profile..........................[800MHZ]1066
    Data Driving Pull Up Level......................[ Auto ]
    cmd Driving Pull Up Level.......................[ Auto ]
    ctrl Driving Pull Up Level......................[ Auto ]
    clk Driving Pull Up Level.......................[ Auto ]

    Data Driving Pull Down Level....................[ Auto ]
    cmd Driving Pull Down Level.....................[ Auto ]
    ctrl Driving Pull Down Level....................[ Auto ]
    clk Driving Pull Down Level.....................[ Auto ]

    ******Motherboard Voltage Control******

    Load-Line Calibration...........................[ disable ]Enable
    CPU Vcore [ 1.21250 ]...................[ 1.28125V ]if your Q9550 is C1 revision maybe will needs more voltage
    CPU Termination [ 1.20 ]...................[ 1.240V ]
    CPU PLL [ 1.50 ]...................[ 1.590V ]
    CPU Reference [ 0.760 ]...................[ 0.785V ]63% of CPU Termination, when CPU is 1.2 set CPURef to 0.76 and than increase CPU Termination

    MCH Core [ 1.100 ]...................[ 1.22V]Try to increase max 1.44v
    MCH Reference [ 0.760 ]...................[ 0.825V ]63% of CPU Termination, when CPU is 1.2 set MCHRef to 0.76 and than increase CPU Termination
    MCH/DRAM Refernce [ 0.900 ]...................[0.9V ]1.05
    ICH I/O [ 1.500 ]...................[ 1.57V ]1.5
    ICH Core [ 1.100 ]...................[ 1.2V]1.2

    DRAM Voltage [ 1.800 ]...................[ 2.1V]
    DRAM Termination [ 0.900 ]...................[0.9V]1.05
    Channel A Ref [ 0.900 ]...................[ 0.9V]1.05
    Channel B Ref [ 0.900 ]...................[0.9V]1.05
    Last edited by tonus; 05-16-2009 at 09:33 PM.
    i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •