Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Grishka's E8400 + EP45-UD3P Builds




  1. #11
    Join Date
    May 2009
    Location
    East Coast USA
    Posts
    160

    Default Re: Grishka's E8400 + EP45-UD3P Builds

    Wow, lots of good templates to use as starting points for many of us. You and D-and-W rock! (not to mention the rest of the forum regulars) thanks

    -devoh
    Antec P180 case
    Intel E8500 E0 Stepping
    Gigabyte GA-EP45-UD3P rev 1.1 BIOS F10j
    Thermalright Ultra eXtreme 120!! Do NOT try and save a few bucks with your cooler.
    Crucial Ballistic PC6400 cas 4 memory 2 x 2G
    2 x WD Black Edition 640G 32Megs cache 7200RPM
    XFX Geforce 260/216 Black Edition
    Corsair TX650W
    Running on 64 bit Win 7 (AHCI mode)

  2. #12

    Default Re: Grishka's E8400 + EP45-UD3P Builds

    533x8.5 Not Stressed
    CPU = Model E8400
    Motherboard = EP45-UD3P Rev. 1.1
    BIOS Version = F9
    Ram = Gskill PC2-8500 8GB

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto
    CPU Clock Ratio .............................: 8
    Fine CPU Clock Ratio.....................: .5
    CPU Frequency ..............................: 4531MHz


    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled]
    CPU Host Frequency (Mhz) ............: 533MHz
    PCI Express Frequency (Mhz) .........:


    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 2.00D
    Memory Frequency (Mhz) ..............: 1066MHz
    DRAM Timing Selectable ................: [Manual]

    Standard Timing Control
    CAS Latency Time........................: 7
    tRCD .............................................: 7
    tRP............................................... ..: 7
    tRAS.............................................. : 20


    Advanced Timing Control
    tRRD...........................................: ?
    tWTR..........................................: ?
    tWR............................................: ?
    tRFC...........................................: ?
    tRTP...........................................: ?
    Command Rate (CMD) ....................: 2


    Channel A
    Static tRead Value.........................: 11
    Channel B
    Static tRead Value.........................: 11


    Motherboard Voltage Control
    CPU
    CPU Vcore….………................................: 1.425
    CPU Termination…..... 1.200V*...............: 1.3
    CPU PLL…………………....1.500V*.......: 1.5
    CPU Referen.…………....0.755V*...........: .76

    MCH/ICH
    MCH Core…………….....1.100V...........: 1.34
    MCH Reference….…….0.800V............: .70
    MCH/DRAM Ref.…......0.900V..............: .90
    ICH I/O……………….....1.500V............: 1.5
    ICH Core…………...……1.100V...........: 1.2

    DRAM
    DRAM Voltage ……....1.800V............: 2.0
    DRAM Termination .…0.900V............:
    Channel A Reference 0.900V............:
    Channel B Reference 0.900V............:
    Quote Originally Posted by Alex St. John
    Consider for a moment that what we think of as “intelligence” is the byproduct of a computing architecture that depends on massive parallelism to interact with the world in real time without stalling for progress bars. If our ancestors’ brains had depended on running Vista on current dual-core processors for their survival, they would have been eaten by bears.

    Best Quote Ever...
    Quote Originally Posted by Psycho101
    Obey the one and only rule without question when you overclock.... don't cause a fire. Fires are hot and burny... not good.
    Intel E8400 EO@445x9--Gigabyte EP45-UD3P v1.1 ~ F9--EVGA 9800GT @ 700/1750/1100--8GB Gskill 1066

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •