Hi all I need a little help
I have Corsair 4GB(2 x 2gig) , 8800gts , e4300 on a Gigabyte ga-g31m1-es2L board
now the ram is detected standard 5-5-5-18 values at 800MHz as it should
the memory can be overclocked to (5-5-5-15) at 2.1V @ 1066MHz
I have tested this on another board and works fine @ 1066+ mhz
So I should have plenty of head room that is why I got this ram

The trouble is that I can't move the fsb not even 1mhz I can't even underclock it not at all
updated BIOS
PCI E 100 mhz
over volt ram and even easy tuner will not respond

I dropped the multiplier down from 9x down to 8x = 1.6ghz booted fine then put the fsb to 202 and sure enough it rebooted to default settings

Last thing I did was set multiplier 6x =1.2ghz dropped ram to 533 booted fine reboot into BIOS set FSB 202 it rebooted to default settings set FSB 198 it rebooted to default settings

As soon as I touch the FSB up or down it reboots to default settings

I have read that some people find this board fine for clocking and others have the same problem that I do
If all fails I will try a pin mod on the cpu

<style type="text/css"> <!-- @page { margin: 0.79in } P { margin-bottom: 0.08in } --> </style> Any suggestions