System Specs:
Processor: Intel Core 2 Quad Q8200
MoBo: GIGABYTE GA-EP45-UD3P
RAM: OCZ Fatal1ty Edition 8GB (4 x 2GB) DDR2 1066
Cooling: ARCTIC COOLING Freezer 7 Pro
Grease: MASSCOOL G751 Shin-Etsu
Case: Thermaltake DH101 HTPC
Power Supply: OCZ EliteXStream OCZ800EXS 800W
Graphics: SAPPHIRE 100225L Radeon HD 3870
O/S: Win 7 x64

Goal:
1. To run the CPU at around 3.3 (or faster if possible) stable with the above hardware
2. To run the RAM at 1333 if possible

Settings:
BIOS has been flashed, optimized defaults loaded - then following settings applied:

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Fast<o:p></o:p>
CPU Clock Ratio ..........................: 7x
CPU Frequency ...........................: 2.33ghz (333x7)
<o:p> </o:p>
<o:p> </o:p>
Clock Chip Control
Standard Clock Control
<nobr style="font-weight: normal; font-size: 100%; color: rgb(0, 0, 255);" id="itxt_nobr_2_0">CPU</nobr> Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 333 Mhz
PCI Express Frequency (Mhz) .........:Set to 100
<o:p> </o:p>C.I.A.2 .................................:[Disabled]
<o:p> </o:p>
<o:p> </o:p>
Advanced Clock Control [Press Enter]
<st1:street w:st="on"><st1:address w:st="on">CPU Clock Drive</st1:address></st1:street>.........................: <<< 800mV
<st1:street w:st="on"><st1:address w:st="on">PCI Express Clock Drive</st1:address></st1:street>.................: <<< 900mV
CPU Clock Skew (ps).....................: <<< 0ps
MCH Clock Skew (ps).....................: <<< 0ps
<o:p> </o:p>
<o:p> </o:p>
DRAM Performance Control
Performance Enhance...................: [STANDARD]
(G)MCH Frequency Latch...............: [333MHz]
System Memory Multiplier ..............: 3.20B
Memory Frequency (Mhz) ..............: 1066
DRAM Timing Selectable ................: [Manual]
<o:p> </o:p>
Standard Timing Control
CAS Latency Time..............................6 *Per OCZ specs
tRCD ...............................................7 *Per OCZ specs
tRP'.............................................. ...7 *Per OCZ specs
tRAS.............................................. .20 *Per OCZ specs
<o:p> </o:p>
Advanced Timing Control
tRRD.............................................. .3 [Auto]
tWTR..............................................3 [Auto]
tWR............................................... .6 [Auto]
tRFC..............................................54 [Auto]
tRTP.............................................. .3 [Auto]
Command Rate (CMD) .......................0 [Auto]
<o:p> </o:p>
Channel A Timing Settings
Static tRead Value.........................:6 Auto
tRD Phase0 Adjustment...................:0 Auto
tRD Phase1 Adjustment...................:0 Auto
tRD Phase2 Adjustment ..................:0 Auto
tRD Phase3 Adjustment...................:0 Auto

Trd2rd(Different Rank)....................:8 Auto
Twr2wr(Different Rank)...................:8 Auto
Twr2rd(Different Rank)...................:8 Auto
Trd2wr(Same/Diff Rank)..................:9 Auto

Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto
DDR Write Training.........................:Auto
<o:p> </o:p>
Channel A Driving Strength Profiles
Driving Strength ...................1066 per RAM *would like to OC if possible
<o:p> </o:p>

Channel B

Static tRead Value.........................:6 Auto
tRD Phase0 Adjustment...................:0 Auto
tRD Phase1 Adjustment...................:0 Auto
tRD Phase2 Adjustment ..................:0 Auto
tRD Phase3 Adjustment...................:0 Auto

Trd2rd(Different Rank)....................:8 Auto
Twr2wr(Different Rank)...................:8 Auto
Twr2rd(Different Rank)...................:8 Auto
Trd2wr(Same/Diff Rank)..................:9 Auto

Dimm1 Clock Skew Control...............:Auto
Dimm2 Clock Skew Control...............:Auto
DDR Write Training.........................:Auto
<o:p> </o:p>
Channel B Driving Strength Profiles
Driving Strength ...................1066 per RAM Specs ****would like to OC if possible
<o:p> </o:p>
Motherboard Voltage Control
CPU
Load-Line Calibration.....................: Enabled
CPU Vcore….……….........................: 1.23750v [Auto]
CPU Termination….........................: 1.200v [Auto]
CPU PLL………………….......................: 1.500v [Normal]
CPU Referen.………….......................: 0.760v [Auto]

MCH/ICH
MCH Core…………….........................: 1.100v [Auto]
MCH Reference……........................: 0.760v [Auto]
MCH/DRAM Ref…….........................: 0.900v [Auto]
ICH I/O……...................................: 1.500v [Auto]
ICH Core…….................................: 1.100v [Auto]
<o:p> </o:p>
DRAM
DRAM Voltage ……..........................: 2.000v Per OCZ Spec
DRAM Termination ……....................: 0.900v [Auto]
Channel A Reference…....................: 0.900v [Auto]
Channel B Reference…....................: 0.900v [Auto]
<o:p> </o:p>
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Disabled]<o:p></o:p>

Super big thanks to all who help!