Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 28

Thread: tweaking




  1. #11
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: tweaking

    Yeah check to see if the CrossfireX is enabled in Catylist Control Center. If it is you are good.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


  2. #12
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    ok ill check and let you know the resalt but i also wana tweak my bios for better speed.


    <HR style="BACKGROUND-COLOR: #d1d1e1; COLOR: #d1d1e1" SIZE=1> <!-- / icon and title --><!-- message -->
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [10x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.33
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [Auto]
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]

    DRAM Performance Control
    Performance Enhance ------------------- : [TuRBO]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [SPD]...[AUTO]
    Memory Frequency (Mhz) ---------------- : [800]...[800]
    DRAM Timing Selectable ---------------- : [SPD] [AUTO]

    standerd Timing Control
    cas latercy time ------------- 6 ---------- : [Auto]
    trcd ------------------- 6 ---------- : [Auto]
    trp --------------------- 6 ---------- : [Auto]
    tras ------------------- 18 ---------- : [Auto]

    Motherboard Voltage Control
    CPU Vcore --------------- 1.25000v ---- : [Auto]
    CPU Termination --------- 1.200v ----- : [Auto]
    CPU PLL ----------------- 1.500v ----- : [Auto]
    CPU Reference ----------- 0.760v ----- : [Auto]
    CPU Reference2 ---------- 0.800v ----- : [Auto]
    MCH/ICH
    MCH <NOBR>Core</NOBR> ---------------- 1.100v ------- : [Auto]
    MCH Reference ----------- 0.760v ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900v ------ : [Auto]
    ICH I/O ----------------- 1.500v ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800v ------- : [Auto]
    DRAM Termination -------- 0.900v ------- : [Auto]
    Channel A Reference ----- 0.900v ------- : [Auto]
    Channel B Reference ----- 0.900v ------- : [Auto]

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: tweaking

    What speed are you wanting to run, or did you want to leave it at stock?

    We need your full settings, you only posted half. Please fill out the entire template

  4. #14
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    i gave all my setting for the MB Intelligent tweaker what more info do you need?

  5. #15
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [10x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.33
    Clock <NOBR>Chip</NOBR> Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [Auto]
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]

    DRAM Performance Control
    Performance Enhance ------------------- : [TuRBO]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System <NOBR>Memory</NOBR> Multiplier -------------- : [SPD]...[AUTO]
    Memory Frequency (Mhz) ---------------- : [800]...[800]
    DRAM Timing Selectable ---------------- : [SPD] [AUTO]

    standerd Timing Control
    cas latercy time ------------- 6 ---------- : [Auto]
    trcd ------------------- 6 ---------- : [Auto]
    trp --------------------- 6 ---------- : [Auto]
    tras ------------------- 18 ---------- : [Auto]

    Motherboard Voltage Control
    CPU Vcore --------------- 1.25000v ---- : [Auto]
    CPU Termination --------- 1.200v ----- : [Auto]
    CPU PLL ----------------- 1.500v ----- : [Auto]
    CPU Reference ----------- 0.760v ----- : [Auto]
    CPU Reference2 ---------- 0.800v ----- : [Auto]
    MCH/ICH
    MCH Core ---------------- 1.100v ------- : [Auto]
    MCH Reference ----------- 0.760v ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900v ------ : [Auto]
    ICH I/O ----------------- 1.500v ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800v ------- : [Auto]
    DRAM Termination -------- 0.900v ------- : [Auto]
    Channel A Reference ----- 0.900v ------- : [Auto]
    Channel B Reference ----- 0.900v ------- : [Auto]



    ADVANCED BIOS FEATURE

    hard disck boot..................................press enter
    first boot device.................................floopy
    secound boot device................................hard disck
    third boot device............................................ cdrom
    pasword check............................................. ...setup
    hdd s.m.a.r.t.capability.............................. ...............disabled
    cpu multi-threading......................................... .........disabled
    limit cpuid max.to 3................................................. .....disabled
    no-execute memory protect........................................... ....enabled
    cpu enhanced halt (cie)............................................. ........enabled
    c2/c2e state support........................................... ..............disabled
    c4/c4e state support........................................... ................disabled
    cpu thermal monitor 2 (tm2)............................................. ......enabled
    cpu eist function.......................................... .......................enabled
    virtualization technology........................................ .................enabled
    delay for hdd (secs)............................................ ..................0
    init display first............................................. ......................pci
    back up bios.............................................. .........................disabled
    Last edited by gigabytes; 12-15-2009 at 10:27 AM.

  6. #16
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: tweaking

    I need your full specs in your signature so I don't have to hunt them down, then I need you to fill out each setting in the template as you see below

    This is Just a template I use to ask people their settings, pay no attention to the numbers in it, replace with yours

    CPU = Model #
    Motherboard = Model, Revision #
    BIOS Version =
    Ram = Brand, Model#, Part#, And or Link

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster ...............: Auto or Fast
    CPU Clock Ratio ..........................: 
    Fine CPU Clock Ratio.....................:.0
    CPU Frequency ...........................: 
    
    
    Clock Chip Control 
    Standard Clock Control
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: Mhz
    PCI Express Frequency (Mhz) .........:Set to 100
    
    C.I.A.2 .................................:[Disabled]
    
    
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 900
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<< 
    
    
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: 
    Memory Frequency (Mhz) ..............: 
    DRAM Timing Selectable ................: [Manual]
    
    Standard Timing Control
    CAS Latency Time........................
    tRCD .........................................
    tRP'...........................................
    tRAS..........................................
    
    Set all Suggested below to highest Values first.  Then later you can lower, one at a time, testing as you go
    
    Advanced Timing Control
    tRRD...........................................
    tWTR..........................................
    tWR............................................
    tRFC...........................................
    tRTP...........................................
    Command Rate (CMD) ....................:2
    
    Driving Strength Profiles
    Driving Strength ............................
    
    Channel A
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Channel B
    Static tRead Value.........................:6/7-10 333/B MCH - 8/9-12 400/D MCH
     tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
     tRD Phase2 Adjustment .................:Auto
     tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
    
    Motherboard Voltage Control
    
    CPU
    CPU Vcore….……….........................:Auto if not overclocking, if you are overclocking please do find and set your own voltages
    
    CPU Termination…..... 1.200V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.2-1.5 depending on Vcore, try to keep at least .1 under vcore.  Auto is fine if not overclocking
    
    CPU PLL…………………....1.500V*.......: << If overclocking Please set to stock, Auto overvolts this way to much.  Optimal range for overclock would be 1.5-1.65.  Auto is fine if not overclocking
    
    CPU Referen.…………....0.755V*.......: <<< .64% Of Vtt (Termination above) Auto Will set this correctly 
    
    CPU Reference2………,,0.800V*.......:<<< .67% Of Vtt (Termination above) Auto Will set this correctly 
    
    MCH/ICH
    MCH Core…………….....1.100V...........: << 
    MCH Reference….…….0.800V...........; <<< Leave
    MCH/DRAM Ref.…......0.900V...........: <<< Leave
    ICH I/O……………….....1.500V............: <<< Leave
    ICH Core…………...……1.100V............: <<< Leave
    
    DRAM
    DRAM Voltage ……....1.800V............: 
    DRAM Termination .…0.900V............: <<< Leave
    Channel A Reference 0.900V............: <<< Leave
    Channel B Reference 0.900V............: <<< Leave
    
    Advanced Settings
    Limit CPUID Max. to 3.....................: [Disabled]
    No-Execute Memory Protect............: [Enabled]
    CPU Enhanced Halt (C1E)................: [Disabled]
    C2/C2E State Support....................: [Disabled]
    x C4/C4E State Support..................: [Disabled]
    CPU Thermal Monitor 2(TM2) ...........: [Enabled]
    CPU EIST Function.........................: [Disabled]
    Virtualization Technology................: [Disabled] Enabled if you use Vmware/Virtual PC
    
    Integrated Peripherals
    Legacy USB Storage Detect ..............[Disabled] *Note* Must be enabled to flash from USB

  7. #17
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    MB Intelligent Tweaker(M.I.T.)
    Robust <NOBR>Graphics</NOBR> Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [10x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.33
    Clock <NOBR>Chip</NOBR> Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [Auto]
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]

    DRAM Performance Control
    Performance Enhance ------------------- : [TuRBO]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System <NOBR>Memory</NOBR> Multiplier -------------- : [SPD]...[AUTO]
    Memory Frequency (Mhz) ---------------- : [800]...[800]
    DRAM Timing Selectable ---------------- : [SPD] [AUTO]

    standerd Timing Control
    cas latercy time ------------- 6 ---------- : [Auto]
    trcd ------------------- 6 ---------- : [Auto]
    trp --------------------- 6 ---------- : [Auto]
    tras ------------------- 18 ---------- : [Auto]

    Motherboard Voltage Control
    CPU Vcore --------------- 1.25000v ---- : [Auto]
    CPU Termination --------- 1.200v ----- : [Auto]
    CPU PLL ----------------- 1.500v ----- : [Auto]
    CPU Reference ----------- 0.760v ----- : [Auto]
    CPU Reference2 ---------- 0.800v ----- : [Auto]
    MCH/ICH
    MCH Core ---------------- 1.100v ------- : [Auto]
    MCH Reference ----------- 0.760v ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900v ------ : [Auto]
    ICH I/O ----------------- 1.500v ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800v ------- : [Auto]
    DRAM Termination -------- 0.900v ------- : [Auto]
    Channel A Reference ----- 0.900v ------- : [Auto]
    Channel B Reference ----- 0.900v ------- : [Auto]



    ADVANCED BIOS FEATURE

    hard disck boot..................................press enter
    first boot device.................................floopy
    secound boot device................................hard disck
    third boot device............................................ cdrom
    pasword check............................................. ...setup
    hdd s.m.a.r.t.capability.............................. ...............disabled
    limit cpuid max.to 3................................................. .....disabled
    no-execute memory protect........................................... ....enabled
    cpu enhanced halt (cie)............................................. ........enabled
    c2/c2e state support........................................... ..............disabled
    c4/c4e state support........................................... ................disabled
    cpu thermal monitor 2 (tm2)............................................. ......enabled
    cpu eist function.......................................... .......................enabled
    virtualization technology........................................ .................enabled
    delay for hdd (secs)............................................ ..................0
    init display first............................................. ......................pci
    back up bios.............................................. .........................disabled

    cpu...........intel Core 2 Duo E8600
    Motherboard model...........GA-EP45-DS5 /REV....A2/BIOS VER.....F13a
    Ram.....Kinston /2048 mbytes /DDR2

    i want a speed of 360.0mhz and stable plz
    Last edited by gigabytes; 12-15-2009 at 02:41 PM.

  8. #18
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: tweaking

    OK, thanks. I see you want 3.6, thanks

    I do need your FULL settings, each setting I listed in the template though before I can advise, you are leaving many out and I need to see what you have set. If auto, enter auto, but I need to see them all please

  9. #19
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    that is exactly how my setting are in the bios

  10. #20
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: tweaking

    What board do you have then P35? If it is P45, that is not how your BIOS is as there is MANY More settings, even some I do not ask to see.

Page 2 of 3 FirstFirst 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •