Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: tweaking




  1. #21
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    its the p45.

  2. #22
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    when i go into my bios i have 14 option so on the main page of my bios do you mean you want............ mb intelligent tweaker
    ............standard cmos feature
    .............advanced bios setting are thsesthe ones you need out of 14 options??????

  3. #23
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: tweaking

    I need all the ones in my template, yes all of them are inside MIT section of the BIOS, but some are on other pages within the MIT Section.

  4. #24
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    CPU Clock Ratio ---------------------- : [10x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.33
    Clock <NOBR>Chip</NOBR> Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [Auto]
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]

    DRAM Performance Control
    Performance Enhance ------------------- : [TuRBO]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System <NOBR>Memory</NOBR> Multiplier -------------- : [SPD]...[AUTO]
    Memory Frequency (Mhz) ---------------- : [800]...[800]
    DRAM Timing Selectable ---------------- : [SPD] [AUTO]


    ADVANCED CLOCK TIMING

    cpu clock drive............................................8 00mv
    pci express clock drive..................................900mv
    cpu clock skew.............................................0 ps
    mch clock skew.............................................. 0ps


    standerd Timing Control
    cas latercy time ------------- 6 ---------- : [Auto]
    trcd ------------------- 6 ---------- : [Auto]
    trp --------------------- 6 ---------- : [Auto]
    tras ------------------- 18 ---------- : [Auto]

    <NOBR>Motherboard</NOBR> Voltage Control
    CPU Vcore --------------- 1.25000v ---- : [Auto]
    CPU Termination --------- 1.200v ----- : [Auto]
    CPU PLL ----------------- 1.500v ----- : [Auto]
    CPU Reference ----------- 0.760v ----- : [Auto]
    CPU Reference2 ---------- 0.800v ----- : [Auto]
    MCH/ICH
    MCH Core ---------------- 1.100v ------- : [Auto]
    MCH Reference ----------- 0.760v ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900v ------ : [Auto]
    ICH I/O ----------------- 1.500v ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800v ------- : [Auto]
    DRAM Termination -------- 0.900v ------- : [Auto]
    Channel A Reference ----- 0.900v ------- : [Auto]
    Channel B Reference ----- 0.900v ------- : [Auto]



    ADVANCED BIOS FEATURE

    hard disck boot..................................press enter
    first boot device.................................floopy
    secound boot device................................hard disck
    third boot device............................................ cdrom
    pasword check............................................. ...setup
    hdd s.m.a.r.t.capability.............................. ...............disabled
    cpu multi-threading......................................... .........disabled
    limit cpuid max.to 3................................................. .....disabled
    no-execute memory protect........................................... ....enabled
    cpu enhanced halt (cie)............................................. ........enabled
    c2/c2e state support........................................... ..............disabled
    c4/c4e state support........................................... ................disabled
    cpu thermal monitor 2 (tm2)............................................. ......enabled
    cpu eist function.......................................... .......................enabled
    virtualization technology........................................ .................enabled
    delay for hdd (secs)............................................ ..................0
    init display first............................................. ......................pci
    back up bios.............................................. .........................disabled

  5. #25
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: tweaking

    This is till not half of what I need really. So you will still need to find many settings I am about to give to you that you do not have listed...

    Sorry, I still need a link to your memory or the model # before I can advise you, then I will edit this more. Settings in it now may not work with your memory?

    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto or fast]
    CPU Clock Ratio ---------------------- : [9x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.6

    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled] << Enabled
    CPU Host Frequency (Mhz) --------------: [401]
    PCI Express Frequency (Mhz) ---------- : [Auto] << 100
    C.I.A.2 ------------------------------ : [Disabled]

    Advanced Clock Control ------- [Press Enter]

    DRAM Performance Control
    Performance Enhance ------------------- : [TuRBO] << Standard
    (G)MCH Frequency Latch ---------------- : [Auto]
    System Memory Multiplier -------------- : [SPD]...[AUTO] << Set 2.00D
    Memory Frequency (Mhz) ---------------- : [800]...[800]
    DRAM Timing Selectable ---------------- : [SPD] [AUTO] << manual


    ADVANCED CLOCK TIMING

    cpu clock drive............................................8 00mv
    pci express clock drive..................................900mv
    cpu clock skew.............................................0 ps
    mch clock skew.............................................. 0ps


    standerd Timing Control
    cas latercy time ------------- 6 --------- 5/6
    trcd ------------------- 6 ---------- : 5/6
    trp --------------------- 6 ---------- : 5/6
    tras ------------------- 18 ---------- : 15/18

    Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go

    Advanced Timing Control
    tRRD...........................................3-4
    tWTR..........................................3-6
    tWR............................................4-6
    tRFC...........................................42-48 for 2GB 52-62 for 4GB
    tRTP........................................... 3-5
    Command Rate (CMD) ....................:2

    Driving Strength Profiles
    Driving Strength ............................ Set 800 or 1066, often 1066 works best even for 800Mhz ram speed

    Channel A
    Static tRead Value.........................:8-9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Channel B
    Static tRead Value.........................:8-9
    tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto
    Twr2wr(Different Rank)...................:Auto
    Twr2rd(Different Rank)...................:Auto
    Trd2wr(Same/Diff Rank)..................:Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps

    Motherboard Voltage Control
    CPU Vcore --------------- 1.25000v ---- : [Auto] << Set manually, all up to your CPU. You may need 1.24-1.38

    CPU Termination --------- 1.200v ----- : [Auto] << Set 1.225-1.3
    CPU PLL ----------------- 1.500v ----- : [Auto] << Set 1.5-1.54
    CPU Reference ----------- 0.760v ----- : [Auto]
    CPU Reference2 ---------- 0.800v ----- : [Auto]

    MCH/ICH
    MCH Core ---------------- 1.100v ------- : [Auto] << Auto if 2GB 1.20-1.24 if 4GB
    MCH Reference ----------- 0.760v ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900v ------ : [Auto]
    ICH I/O ----------------- 1.500v ------- : [Auto]

    DRAM
    DRAM Voltage ------------ 1.800v ------- : [Auto] << Set to your ram spec voltage, normally 2.0-2.1V
    DRAM Termination -------- 0.900v ------- : [Auto]
    Channel A Reference ----- 0.900v ------- : [Auto]
    Channel B Reference ----- 0.900v ------- : [Auto]

  6. #26
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    <HR style="BACKGROUND-COLOR: #d1d1e1; COLOR: #d1d1e1" SIZE=1> <!-- / icon and title --><!-- message -->
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------------- : [Auto]
    <NOBR>CPU</NOBR> Clock Ratio ---------------------- : [10x]
    Fine CPU Clock Ratio ----------------- : [0.0]
    CPU Frequency ---------------------: 3.33
    Clock <NOBR><NOBR>Chip</NOBR></NOBR> Control
    Standard Clock Control
    CPU Host Clock Control --------------- : [disabled]
    CPU Host Frequency (Mhz) --------------: [333]
    PCI Express Frequency (Mhz) ---------- : [Auto]
    C.I.A.2 ------------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]

    Channel A
    Static tRead Value.........................:12 auto
    tRD Phase0 Adjustment...................:0Auto
    tRD Phase1 Adjustment...................:0Auto
    tRD Phase2 Adjustment .................:0Auto
    tRD Phase3 Adjustment..................:0Auto
    Trd2rd(Different Rank)....................6:Auto
    Twr2wr(Different Rank)...................:6Auto
    Twr2rd(Different Rank)...................:5Auto
    Trd2wr(Same/Diff Rank)..................:8Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps
    Channel B
    Static tRead Value.........................:12auto
    tRD Phase0 Adjustment...................:0Auto
    tRD Phase1 Adjustment...................:0Auto
    tRD Phase2 Adjustment .................:0Auto
    tRD Phase3 Adjustment..................:0Auto
    Trd2rd(Different Rank)....................:6Auto
    Twr2wr(Different Rank)...................:6Auto
    Twr2rd(Different Rank)...................:5Auto
    Trd2wr(Same/Diff Rank)..................:8Auto
    Dimm1 Clock Skew Control...............:Auto ps
    Dimm2 Clock Skew Control...............:Auto ps


    DRAM Performance Control
    Performance Enhance ------------------- : [TuRBO]
    (G)MCH Frequency Latch ---------------- : [Auto]
    System <NOBR><NOBR>Memory</NOBR></NOBR> Multiplier -------------- : [SPD]...[AUTO]
    <NOBR>Memory</NOBR> Frequency (Mhz) ---------------- : [800]...[800]
    DRAM Timing Selectable ---------------- : [SPD] [AUTO]


    ADVANCED CLOCK TIMING

    cpu clock drive............................................8 00mv
    pci express clock drive..................................900mv
    cpu clock skew.............................................0 ps
    mch clock skew.............................................. 0ps


    standerd Timing Control
    cas latercy time ------------- 6 ---------- : [Auto]
    trcd ------------------- 6 ---------- : [Auto]
    trp --------------------- 6 ---------- : [Auto]
    tras ------------------- 18 ---------- : [Auto]

    <NOBR><NOBR>Motherboard</NOBR></NOBR> Voltage Control
    CPU Vcore --------------- 1.25000v ---- : [Auto]
    CPU Termination --------- 1.200v ----- : [Auto]
    CPU PLL ----------------- 1.500v ----- : [Auto]
    CPU Reference ----------- 0.760v ----- : [Auto]
    CPU Reference2 ---------- 0.800v ----- : [Auto]
    MCH/ICH
    MCH Core ---------------- 1.100v ------- : [Auto]
    MCH Reference ----------- 0.760v ------- : [Auto]
    MCH/DRAM Ref ------------ 0.900v ------ : [Auto]
    ICH I/O ----------------- 1.500v ------- : [Auto]
    DRAM
    DRAM Voltage ------------ 1.800v ------- : [Auto]
    DRAM Termination -------- 0.900v ------- : [Auto]
    Channel A Reference ----- 0.900v ------- : [Auto]
    Channel B Reference ----- 0.900v ------- : [Auto]



    ADVANCED BIOS FEATURE

    hard disck boot..................................press enter
    first boot <NOBR>device</NOBR>.................................floopy
    secound boot device................................hard disck
    third boot device............................................ cdrom
    pasword check............................................. ...setup
    hdd s.m.a.r.t.capability.............................. ...............disabled
    cpu multi-threading......................................... .........disabled
    limit cpuid max.to 3................................................. .....disabled
    no-execute memory protect........................................... ....enabled
    cpu enhanced halt (cie)............................................. ........enabled
    c2/c2e state support........................................... ..............disabled
    c4/c4e state support........................................... ................disabled
    cpu thermal monitor 2 (tm2)............................................. ......enabled
    cpu eist function.......................................... .......................enabled
    virtualization technology........................................ .................enabled
    delay for hdd (secs)............................................ ..................0
    init display first............................................. ......................pci
    back up bios.............................................. .........................disabled
    Last edited by gigabytes; 12-15-2009 at 07:33 PM.

  7. #27
    Join Date
    Dec 2009
    Location
    sydney
    Posts
    21

    Default Re: tweaking

    in advanced timing control TWR..........[6] [AUTO] what do i chang auto to??

  8. #28
    Join Date
    Apr 2009
    Location
    Virginia
    Posts
    1,470

    Default Re: tweaking

    You may want to post all of your system specifications.
    http://forums.tweaktown.com/gigabyte...ench-test.html
    http://www.gigabyte-usa.com/FileList...ios_qflash.pdf
    Phenom II 945 @ 3.2Ghz w/Thermaltake Big Typhoon Pro 14 CPU Cooler
    Gigabyte GA-MA78GM-S2H rev.1.1 F11
    Sapphire 3870HD / 100225L / 512MB / ddr4
    4GB / Kingston / KHX8500D2K2/2GN / 5-5-5-18 / 1066Mhz
    (2) WD Caviar / WD2500AAKS/ 250GB in SATA RAID-0
    (1) WD Caviar / WD2500AAKS/ 250GB in SATA AHCI
    (2) IDE's 1 8XdualDVDRW 1 52x32x52x CDRW
    Antec /Neo HE550 / 550W
    Mid size ATX case with show through panel
    2) 80x80 front fans (1) 120x120 rear fan and small nb fan
    Microsoft comfort curve USB keyboard 2000 ver.1.0
    Logitech G500 USB mouse
    Monitor: CMV937A
    7.1+2 Channel High Definition ALC889A
    Dual boot Windows 7 32bit home & Windows 7 64bit home


Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •