Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31

Thread: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help




  1. #11
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Alright! You can find the BSOD Code in the even viewer if you remember what time it happened, otherwise wait it out.

    I'll see ya later tonight, and leave you with this BSOD error causes in case you get one while testing today.

    BSOD Error codes and what they mean:
    0X00000050 << Incorrect Memory Timing/Freq
    0X00000124 << Incorrect Vtt Voltage (To Much/Not Enough)
    0X00000101 << Not enough Vcore Voltage

  2. #12
    Join Date
    Apr 2010
    Location
    Slough, England
    Posts
    18

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    I havnt got a blue screen since lol :\ but trying to run the ram at 1600mhz doesnt seem to want to boot any more with them settings u gave me :( it gets to the windows loading logo and then restarts or it just says "loading windows files", but running the ram at 1333mhz its very stable.

  3. #13
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Sounds like you are about there then if it gets that far, let me see the exact settings you try for 1600 and I will advise back.

  4. #14
    Join Date
    Apr 2010
    Location
    Slough, England
    Posts
    18

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Ok dood I'll let you, maybe I'll try to up the voltage alittle too, but ATM it's running at 1333mhz at 7-7-7-20 very nice and stable, but it's when I change to the spd to either 4.00a/b/c or d I get the problems

  5. #15
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Well depending on your FSB you wont be able to use certain ones, that is probably the issue there and tRD must be a certain amount with the different multi/strap options.

    If you want and you get stuck trying 1600 give me your settings, but if you want to stay where you are that is fine with me as well.

    NO problem either way

  6. #16
    Join Date
    Apr 2010
    Location
    Slough, England
    Posts
    18

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Ok dood I'll give it a try later, is there anyway I can view my bios settings in windows so I can copy and paste it or do I have to just to write it all out?

  7. #17
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    No, you will have to do the template from memory or print it out and fill in when you are in the BIOS.

  8. #18
    Join Date
    Apr 2010
    Location
    Slough, England
    Posts
    18

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Code:
    MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto or Fast CPU Clock Ratio ..........................: 8 Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: 3.2
    Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Enabled] CPU Host Frequency (Mhz) ............: 401 Mhz PCI Express Frequency (Mhz) .........:Set to 100
    C.I.A.2 .................................:[Disabled]
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800 PCI Express Clock Drive.................: <<< 800 CPU Clock Skew (ps)....................: <<< MCH Clock Skew (ps)...................: <<< DRAM Performance Control Performance Enhance...................: [STANDARD] Extreme Memory Profile (X.M.P.).....: Disabled (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: [Auto] Memory Frequency (Mhz) ..............: 1333 1600 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time........................ 8 tRCD ......................................... 8 tRP'........................................... 8 tRAS.......................................... 20/24 Advanced Timing Control tRRD........................................... 5 tWTR.......................................... 6 tWR............................................ 8 tRFC........................................... 72 tRTP........................................... 5 Command Rate (CMD) ....................:2 Channel A Static tRead Value.........................: 9 tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................: 9 tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control CPU CPU Vcore….……….........................: 1.45 CPU Termination…..... 1.200V*.......: 1.260 CPU PLL…………………....1.500V*.......: [Auto] CPU Referen.…………....0.755V*.......: [Auto] CPU Reference2………,,0.800V*.......: [Auto] MCH/ICH MCH Core…………….....1.100V...........: << 1.26 MCH Reference….…….0.800V...........; <<< [Auto] MCH/DRAM Ref.…......0.900V...........: <<< [Auto] ICH I/O……………….....1.500V............: <<< 1.550v ICH Core…………...……1.100V............: <<< 1.400v DRAM DRAM Voltage ……....1.800V............: 1.66V DRAM Termination .…0.900V............: <<< [Auto] Channel A Reference 0.900V............: <<< [Auto] Channel B Reference 0.900V............: <<< [Auto]
    These are my settings, If I have the System Memory Multiplier to AUTO or 4.00A it boots but crashes at the windows loading screen, if I have 4.00B, C or D it doesnt post.

    Btw should I enable or leave disabled load-line calibration?
    Last edited by jhey; 04-08-2010 at 03:03 AM.

  9. #19
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    4.00A will be too tight on the NB speed and timings, not surprised this wouldn't boot. I am surprised though that you could not get 4.00B to work, might just be your memory and you would have to use 3.33D. That or you may need to tweak your MCH ref for this to work properly, there is a link in my signature for how to set this (Sorry images will be down until the 10th). You may want to try .70-.84, with various amounts of Vtt, but you have to set up properly so please read the guide if you tinker with this.

    4.00D shouldn't be there, unless Intel changed something? I have seen this mentioned by a few users, and it did not work for them either, so maybe it is a glitch and should not be there? Can't test myself so it is really hard to say for sure.

    LLC enabled, this will help you and you may be able to use less vcore later on with it enabled.

    Try these

    Code:
    MB Intelligent Tweaker(M.I.T.) 
    Robust Graphics Booster ...............: Auto or Fast 
    CPU Clock Ratio ..........................: 8 
    Fine CPU Clock Ratio.....................:.0 
    CPU Frequency ...........................: 3.2
     
     
    Clock Chip Control Standard Clock Control 
    CPU Host Clock Control..................: [Enabled] 
    CPU Host Frequency (Mhz) ............: 401 Mhz 
    PCI Frequency (Mhz) .........:Set to 100
     
    C.I.A.2 .................................:[Disabled]
     
     
    Advanced Clock Control [Press Enter]
    CPU Clock Drive...........................: <<< 800
    PCI Express Clock Drive.................: <<< 800  
    CPU Clock Skew (ps)....................: <<< 
    MCH Clock Skew (ps)...................: <<<   Test with 50-250 here
     
    DRAM Performance Control
    Performance Enhance...................: [STANDARD]  << Try extreme or Turbo, sometimes this helps at higher speeds
    Extreme Memory Profile (X.M.P.).....: Disabled
    (G)MCH Frequency Latch...............: [Auto]
    System Memory Multiplier ..............: [Auto]  << Try 4.00B
    Memory Frequency (Mhz) ..............: 1333   1600
    DRAM Timing Selectable ................: [Manual]
     
    Standard Timing Control
    CAS Latency Time........................ 8  << 9 for now, just to try to get going
    tRCD ......................................... 8
    tRP'........................................... 8
    tRAS.......................................... 24
     
    Advanced Timing Control
    tRRD........................................... 5
    tWTR.......................................... 6  
    tWR............................................ 8  << 10 for now
    tRFC........................................... 72   << 82 for now
    tRTP........................................... 5
    Command Rate (CMD) ....................:2
     
    Channel A
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:Auto
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Channel B
    Static tRead Value.........................: 9
    tRD Phase0 Adjustment...................:Auto 
    tRD Phase1 Adjustment...................:Auto
    tRD Phase2 Adjustment .................:Auto
    tRD Phase3 Adjustment..................:Auto
    Trd2rd(Different Rank)....................:Auto 
    Twr2wr(Different Rank)...................:Auto 
    Twr2rd(Different Rank)...................:Auto 
    Trd2wr(Same/Diff Rank)..................:Auto 
    Dimm1 Clock Skew Control...............:Auto  ps
    Dimm2 Clock Skew Control...............:Auto  ps
     
    Motherboard Voltage Control
     
    CPU
    CPU Vcore….……….........................: 1.45
     
    CPU Termination…..... 1.200V*.......: 1.260  << 1.30-1.34 for now
     
    CPU PLL…………………....1.500V*.......:  [Auto]
     
    CPU Referen.…………....0.755V*.......: [Auto] 
     
    CPU Reference2………,,0.800V*.......: [Auto] 
     
    MCH/ICH
    MCH Core…………….....1.100V...........: << 1.26  << Try 1.28-1.3 (Try last, leave for now and try all other suggestions, then if no luck come here)
    MCH Reference….…….0.800V...........; <<< [Auto]
    MCH/DRAM Ref.…......0.900V...........: <<< [Auto]
    ICH I/O……………….....1.500V............: <<< 1.550v
    ICH Core…………...……1.100V............: <<< 1.400v  << OUCH. hope that is a typo!   If not please change now, 1.14-1.2 is plenty
     
    DRAM
    DRAM Voltage ……....1.800V............: 1.66V   << Try 1.68-1.7 if none of the above helps, then if this works we can try to find why and lower later
    DRAM Termination .…0.900V............: <<< [Auto]
    Channel A Reference 0.900V............: <<< [Auto]
    Channel B Reference 0.900V............: <<< [Auto]

  10. #20
    Join Date
    Apr 2010
    Location
    Slough, England
    Posts
    18

    Default Re: Gigabyte GA-EP43T-USB3 & DDR3 1600MHz Ram Help

    Ich core only goes up like: auto, 1.100, 1.200, 1.300,1.400, I can't do 1.14 :/

Page 2 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •