Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 38

Thread: Overclocking help




  1. #21
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Overclocking help

    i would try raising cpu voltage a few clicks at a time and re-test,qpi i would keep as it is for now,if still unstable then raise qpi/vtt a couple of clicks and test again,you might need anything between 1.3-1.4v for qpi/vtt and 1.35-1.38v for cpu
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  2. #22
    Join Date
    Sep 2010
    Location
    Melbourne
    Posts
    22

    Default Re: Overclocking help

    Is that not going over the safe voltages for the cpu v now?

  3. #23
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Overclocking help

    your safe to use 1.3-1.4v for cpu,if you have vdroop you need to add extra to compensate,if you dont want to go that high with voltages then try at a lower clock,its up to you really

    you could keep cpu voltage where it is and just try raising qpi/vtt voltage again you can safely use anything from 1.3 to 1.4+ you shouldnt need above 1/4v for qpi though
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #24
    Join Date
    Sep 2010
    Location
    Melbourne
    Posts
    22

    Default Re: Overclocking help

    Could it be a problem that my memory frequency is not set correctly at all?
    Still getting blue screen, getting code 003B and 0124
    Raised votages to just under their max settings, should this cpu not be able to hit 4.2ghz?
    Last edited by tegstar83; 09-07-2010 at 04:56 PM.

  5. #25
    Join Date
    Sep 2010
    Location
    Melbourne
    Posts
    22

    Default Re: Overclocking help

    Ok Ive managed to get a stable clock at 3.9Ghz but my ram is running at only 1400mhz how can i bump this up higher without loosing stability?

  6. #26
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking help

    124 BSOD means you need more QPI/Vtt.

    Yes you can raise your memory to the next multi probably, what are you using now? You'll have to raise the memory multi, then uncore as well, and then test/tweak/test ect until you get stable again.

    It may not need that much tweaking though, save your current settings as a profile in case you need to go back to them for anything. On the MAIN page of the BIOS F11 is save and F12 is load.

  7. #27
    Join Date
    Sep 2010
    Location
    Melbourne
    Posts
    22

    Default Re: Overclocking help

    Hi yeah Im using the 8x multi for the memory at the moment, some how I have lost stability once again when trying to adjust the voltages as, I was getting high temps when I was stable at those settings it was going over 83c so I stopped testing and tried to lower the voltages to try to have the temps come down, I will post up all my settings when I get home from work and see what we can troubleshoot, thanks for the help here so far guys.

  8. #28
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking help

    Keep in mind for x8 memory multi you need x16 or above Uncore multi, sometimes x17-x18 is best

  9. #29
    Join Date
    Sep 2010
    Location
    Melbourne
    Posts
    22

    Default Re: Overclocking help

    Yeah I had my Uncore at 17x tried 18x but to no avail,
    my settings are:
    Code:
    Advanced CPU Features:
    CPU Clock Ratio ............................. [21x]
    DP Frequency ................................ (190x21)
    Intel(R) Turbo Boost Tech ................... [Disable]
    chip
    CPU Cores Enabled ........................... [All]
    CPU Multi Threading ......................... [Enabled]
    CPU Enhanced Halt (C1E) ..................... [Disabled]
    C3/C6/C7 State Support ...................... [enabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ........................... [enabled]
    Virtualization Technology ................... [enabled]
    Bi-Directional PROCHOT ...................... [Enabled]

    Uncore & QPI Features:
    QPI Link Ratio .............................. [x36]
    QPI Link Speed .............................. 7.xxGHz
    Uncore Frequency ............................ [x17]
    Isonchronous Frequency ...................... [Enabled]

    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... [190]
    PCI Express Frequency (MHz) .............. [100]


    Advanced Clock Control:
    CPU Clock Drive ............................ [800mV]
    PCI Express Clock Drive .................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]

    Advanced DRAM Features:
    Performance Enhance .................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled] --> Disable XMP and manually adjust your ram latencies
    System Memory Multiplier (SPD) ........ [8.0]
    Memory Frequency (Mhz) ................ 1528
    DRAM Timing Selectable (SPD) .......... [Quick]
    Profile DDR Voltage ................... xxxxV
    Profile QPI Voltage ................... xxxxV
    Channel Interleaving .................. [Auto]
    Rank Interleaving ..................... [Auto]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ........................... 8 [8]
    tRCD ....................................... 8 [8]
    tRP ........................................ 8 [8]
    tRAS ....................................... 24 [24]



    ##Channel A Advanced Timing Control##
    tRC ........................................ [Auto]
    tRRD ....................................... [Auto]
    tWTR ....................................... [Auto]
    tWR ........................................ [Auto]
    tWTP ....................................... [Auto]
    tWL ........................................ [Auto]
    tRFC ....................................... [Auto]
    tRTP ....................................... [Auto]
    tFAW ....................................... [Auto]
    Command Rate (CMD) ......................... [Auto]

    ##Channel A Misc Timing Control##
    B2B CAS Delay .............................. [Auto]
    Round Trip Latency ......................... [Auto]

    Advanced Voltage Control:

    CPU
    Load Line Calibration ...................... [standard]
    CPU Vcore .......................... 1.32500V [normal] look for dvid in bios and set to +0.0750v
    QPI/VTT Voltage .................... 1.355V [1.375]
    CPU PLL ............................ 1.800V [auto]

    MCH/ICH
    PCIE .............................. 1.500v [auto]
    QPI PLL ........................... 1.100v [auto]
    IOH Core ........................... 1.100v [auto]
    ICH I/O ............................ 1.500v [auto]
    ICH Core ........................... 1.100v [auto]

    DRAM
    DRAM Voltage ....................... 1.660V
    DRAM Termination ................... 0.750v [AUTO]
    Ch-A Data VRef. .................... 0.750v [AUTO]
    Ch-B Data VRef. .................... 0.750v [AUTO]
    Ch-C Data VRef. .................... 0.750v [AUTO]
    Ch-A Address VRef. ................. 0.750v [AUTO]
    Ch-B Address VRef. ................. 0.750v [AUTO]
    Ch-C Address VRef. ................. 0.750v [AUTO]

  10. #30
    Lsdmeasap's Avatar
    Lsdmeasap is offline GIGABYTE Guru
    Join Date
    Jan 2008
    Location
    PCB Island
    Posts
    25,940

    Default Re: Overclocking help

    Try x16 for starters then!

    I would also try Performance Enhance Extreme, it's all I ever use even at 2600Mhz+. In the older P35/P45 boards standard was best, but I have seen it cause problems more than once with the new boards, so test that out.

    I also suggest using Dram timing selectable Expert, and set each channel one by one. This way you can see if you have a channel that is failing, it will show up as N/A or - for the MAIN timings.

    I suggest you set your own Vcore, normal isn't going to work at 190 Bclk, unless you are using DVID and know how it works and you believe your vcore is enough.

    Everything else looks ok for now

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •