Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz




  1. #21
    Join Date
    Sep 2010
    Location
    Sweden
    Posts
    33

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Hello. I have same CPU but GA X58 UD5.. so i will borrow this thread.

    I have oc'd to 4.2 but it was not stable so i went down to 4.0

    It seems to be stable now..

    Here is screenshot of my bios settings:

    OC40 - Imgur

    When i made 4.0 first it seemed stable but it did BSOD with the following error:

    http://i.imgur.com/fVB5V.jpg?1

    so i upped the vtt a notch from 1.335 to 1.355 and it seems fine now but im not sure.

    Here is also a screenshot of prime95 and temps:

    http://i.imgur.com/QVxq1.png

    Can you take a look at these settings and say if it looks good? Does it look safe, so i dont end up with a dead CPU/PSU/MOBO?
    Last edited by Divenow; 04-09-2012 at 12:58 PM.

  2. #22
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    those temps/voltages are fine

    need to set cpu clock drive to 800mv
    pci clock drive to 900mv
    set dram voltage to 1.66v,dont worry it will use 1.648v in windows

    set spd memory to expert and set all timings for each memory channel abc ect

    if you set timings to 8-8-8-24-1t maybe you could use less qpi/vtt voltage? or if your happy keep them as they are

    could set cpu voltage to normal and set dvid to +0.175v

    turn on all power saving,eist c1e c3/c6 ect

    cpu will auto downclock at idle/full speed at load,again if your happy with it running full speed all the time then leave as is,all the other settings look fine
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #23
    Join Date
    Sep 2010
    Location
    Sweden
    Posts
    33

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Thanks i changed everything except timings and vtt.. since you wrote 8-8-8-24-1t but i don't know what you mean by 1t?? maybe misspelling?

  4. #24
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Quote Originally Posted by Divenow View Post
    Hello. I have same CPU but GA X58 UD5.. so i will borrow this thread.

    I have oc'd to 4.2 but it was not stable so i went down to 4.0

    It seems to be stable now..

    Here is screenshot of my bios settings:

    OC40 - Imgur

    When i made 4.0 first it seemed stable but it did BSOD with the following error:

    http://i.imgur.com/fVB5V.jpg?1

    so i upped the vtt a notch from 1.335 to 1.355 and it seems fine now but im not sure.

    Here is also a screenshot of prime95 and temps:

    http://i.imgur.com/QVxq1.png

    Can you take a look at these settings and say if it looks good? Does it look safe, so i dont end up with a dead CPU/PSU/MOBO?
    Quote Originally Posted by wazza300 View Post
    those temps/voltages are fine

    need to set cpu clock drive to 800mv
    pci clock drive to 900mv
    Having cpu clock and pci clock drive set to 700/700 is a sign of using Failed safe settings.

    Remember it is suggested to start with loading Optimized defaults from the main screen of the bios. Just setting cpu clock and pci clock drive to 800/900 doesnt change other settings in bios that are not visible to the user.

    @Divenow Please start by loading Optimized defaults press F10 to save and apply then reneter the bios and then renter the bios settings you had along with the changes Wazza has suggested.

    1t is the command rate. It is labled in your bios as command rate (cmd)
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  5. #25
    Join Date
    Sep 2010
    Location
    Sweden
    Posts
    33

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Thanks! Now its chaning from 2400mhz at idle to 4000mhz at load. even shows 200-300mhz idle sometimes.. guess its the power saving thing.. it seems the temps are lower after i changed to your suggested settings except memory timings and vtt

    But.. i got an BSOD after 6-7 hours of playing games / browsing the web. I ran Prime95 for 2,5 hours first time.. i thought it should be stable for every day use but i got a BSOD now..

    Here is the error:
    http://i.imgur.com/fgiqD.jpg
    Last edited by Divenow; 04-11-2012 at 04:37 AM.

  6. #26
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    050 is CPU voltage I think,add one click more on dvid and qpi/vtt
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  7. #27
    Join Date
    Sep 2010
    Location
    Sweden
    Posts
    33

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Ah, yes... "0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x"

  8. #28
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Quote Originally Posted by Divenow View Post
    Ah, yes... "0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x"
    Correct increase qpi/vtt on notch should help.

    Any time changes are made in bios, you should always run a stress test program. Not all games or apps will stress the system fully or stress all the components together like these apps that are designed to stress the system.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  9. #29
    Join Date
    Sep 2010
    Location
    Sweden
    Posts
    33

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Is this bad? http://i.imgur.com/aMykh.png (1-2 cores stopped after 13,5 hours. some guy told me its ok for every day use and gaming)
    Last edited by Divenow; 04-13-2012 at 02:30 AM.

  10. #30
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Need help OC'ing i7-930 with Gigabyte GA-X58A-UD5 to 3.8ghz

    Quote Originally Posted by Divenow View Post
    Is this bad? http://i.imgur.com/aMykh.png (1-2 cores stopped after 13,5 hours. some guy told me its ok for every day use and gaming)
    your temps are fine still 80-82c is fine

    if a worker stops usually its not enough cpu or dvid voltage but you can leave it as it is,if you do get blue screens try adding anothe one/two clicks more cpu or dvid voltage
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •