Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 11 of 12 FirstFirst ... 9101112 LastLast
Results 101 to 110 of 111

Thread: overclocking intel Celeron D 3.2




  1. #101
    Join Date
    Jul 2011
    Location
    jordan
    Posts
    63

    Default Re: overclocking intel Celeron D 3.2

    its good to know that it wont bottle neck any video card i get .. the fsb works only on 333 manually auto , now my rams are at 500 mhz with 6 6 6 15 timings . it works on 7 7 7 20 too but u told me less timings means more speed
    if i changed the fsb jumper back to default ddr2 . is it better or not ? will the motherboard notice the rams

  2. #102
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: overclocking intel Celeron D 3.2

    According to the manual you only need to change the jumper for DDR3 1333.
    Lower timings mens lower latency and a bit more bandwidth, but question is are they stable at those timings, if not change back to 7-7-7-20.

  3. #103
    Join Date
    Jul 2011
    Location
    jordan
    Posts
    63

    Default Re: overclocking intel Celeron D 3.2

    okay ill do a memtest for a couple of hours and will see , and ill reply back to u

  4. #104
    Join Date
    Jul 2011
    Location
    jordan
    Posts
    63

    Default Re: overclocking intel Celeron D 3.2

    but can u tell me why im getting 500 mhz of ram instead of 533 or 667 in cpu z

  5. #105
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: overclocking intel Celeron D 3.2

    I have no idea, the manual says you sould have 800, 1066, and 1333 (400, 533, 667)

  6. #106
    Join Date
    Jul 2011
    Location
    jordan
    Posts
    63

    Default Re: overclocking intel Celeron D 3.2

    okay it was stable at 6 6 6 15 , running on ddr 3 1000 .. now i have something new , we werent sure about the fsb jumper .. so i got it back to default , now i have ddr 800 and ddr3 1066 , and the cpu z the ram is running at 533 with this divider , 5:8 . and 7 7 7 20 . and guess what i tried to increase the cpu clock to 340 and it booted fine ...

  7. #107
    Join Date
    Jul 2011
    Location
    jordan
    Posts
    63

    Default Re: overclocking intel Celeron D 3.2

    so what u think should i try increase the nb voltage to 1,3 and then try to increase the bus speed more in case it didnt boot at the auto voltage when i change it , or should i get back everything like i had it before , its ram is running faster than before on same cl 7 , okay it ran at cl 6 before but with 500 mhz , is this worth it ?


    EDIT .. okay so i cant inscrease the bus speed more than 340 , which is 7 points inscrease from the default . i tried lowering the timings to 6 6 6 17 64 6 4 4 4 on 544mhz , it booted fine . now im going to stress test it and memtest .. and if it passed i think im going to keep this if u agreed with me , since im getting little boost in speed and ram and low timings so i guess it all cases it better than before ..
    Last edited by gametofame; 08-21-2011 at 05:12 PM.

  8. #108
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: overclocking intel Celeron D 3.2

    1.3v on the NB is a lot usually not needed unless running very high FSB(450+) and high speed memory. 1.24-1.26 should be fine.
    With no vcore control you may be able to push it to 2.8-3GHz, but loosen the memory timings untill you reach max CPU clock.

    EDIT: keep your eye on core temperatures, with Prime95 they should not exceed 70c.

  9. #109
    Join Date
    Jul 2011
    Location
    jordan
    Posts
    63

    Default Re: overclocking intel Celeron D 3.2

    okay the max bus speed i could get is 342 which is 2670 almost ,anyways testing my temp with coretemp , 3rd core got to 72 on prime and bsod right away .. i went to bios lowered the bus to 340 . again ran prime , and again 3rd core reached 72 temp and stoped the test .. what should i do now ?
    while trying to increase the bus speed i loosned to cl 9 no result whatsoever

  10. #110
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: overclocking intel Celeron D 3.2

    How high get core 1? 72 is ok just high for Prime95, won't cause no damage to CPU though.
    What thermal paste do you use?

Page 11 of 12 FirstFirst ... 9101112 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •