Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.




  1. #1
    dJabba's Avatar
    dJabba is offline Member
    Join Date
    Sep 2010
    Location
    Denmark
    Posts
    295

    Default Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    Anyone got this or similar setup to work with the XMS 1866 profile under D.C.O.P? As soon as I try to go above 1333MHz I end up with a bluescreen and instant reboot during startup.

    I'm pretty much a noob when it comes to OC'ing, but I'm willing to learn, and imo it should be possible to get to work.

    Specs in signature, Project Whitey
    My advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
    Whitey: ROG Crosshair V Formula/Thunderbolt, AMD 1090T @ 3.2GHz w. NZXT Havic 140, Corsair XMS3 1333 8GB kit, HIS IceQ X HD 6870, Corsair Force GT 120GB, OCZ Vertex4 256GB, Kingston SSDNow 16GB, Samsung 500GB 3" in casedock when needed, Chieftec Nitro88+ 650W, NZXT H2 White, 3x Asus VS248 24"
    Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
    Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)

  2. #2
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    Not familiar with ASUS and not very familiar with AMD, but I'll d/l the manual and see if I can help.
    Meanwhile can you attach a CPU-Z text report(CPU-Z -> About tab -> Save Repoert (.TXT)), and attach it to the post (Go Advanced)

  3. #3
    dJabba's Avatar
    dJabba is offline Member
    Join Date
    Sep 2010
    Location
    Denmark
    Posts
    295

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    Added CPU-Z report here. Thanks a lot for trying to help out even though you don't know the system.
    Attached Files Attached Files
    My advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
    Whitey: ROG Crosshair V Formula/Thunderbolt, AMD 1090T @ 3.2GHz w. NZXT Havic 140, Corsair XMS3 1333 8GB kit, HIS IceQ X HD 6870, Corsair Force GT 120GB, OCZ Vertex4 256GB, Kingston SSDNow 16GB, Samsung 500GB 3" in casedock when needed, Chieftec Nitro88+ 650W, NZXT H2 White, 3x Asus VS248 24"
    Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
    Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)

  4. #4
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    D.O.H.C only sets up your CPU multi and ram speed to run at 1866 mhz,you still need to manually set dram bus voltage and set a qpi/vtt or northbridge voltage as auto won't be enough
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  5. #5
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    What is the maximum memory frequency you can set at stock clock 1600?
    Is the DRAM voltage set to auto or manual, what is the reading in BIOS Monitor -> Voltage Monitor?

    To ran large memory configuration at high speed CPU/NB Voltage must be increased.
    Try to search what the max safe CPU/NB Voltage for this processor, if you cannot find it, do not exceed 1.35v.
    What is the default for this parameter, and what is the reading in Voltage Monitor?
    Last edited by Chike; 09-14-2011 at 08:29 PM.

  6. #6
    dJabba's Avatar
    dJabba is offline Member
    Join Date
    Sep 2010
    Location
    Denmark
    Posts
    295

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    today I reinstalled windows again, just to make sure. All this while the memory ran at 1333 and the cpu at 3.2 (stock). Install went fine, but short after I was finished with drivers the madness begann. I couldn't get far past the windows login screen before it crashed in bluescreen.
    Sometimes it crashed every single process first before finally going to bluescreen when ntfs.sys get terminated.

    After double checking the BIOS, reloading default and checking again and it didn't make any change, I tried adding the Corsair XMS3 1333MHz modules from my server (board is RMA'd atm anyway).
    Suddenly everything seems to work. For a real-life stress test I just played a couple hours NFS Hot Pursuit (couldn't even get a game started before).

    Only thing different in BIOS now really is that I enabled the power saving functions now.

    Now since this memory that has a max speed that matches what the CPU support runs better, that seems logic to me. But the other modules should work fine as well on "low speed". Special since both board and module makers say they are compatible.

    A couple of days ago I ran a windows memory test on them that came up without any errors. Are other memtest tools better to detect errors or should the windows tool have detected it anyway? Could the modules be defektive or out of specs or something even though the memtest cant find it?

    PS. Attached a CPUz with the new mem as well. And thanks for the tips on voltage, will go read up on that
    Attached Files Attached Files
    My advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
    Whitey: ROG Crosshair V Formula/Thunderbolt, AMD 1090T @ 3.2GHz w. NZXT Havic 140, Corsair XMS3 1333 8GB kit, HIS IceQ X HD 6870, Corsair Force GT 120GB, OCZ Vertex4 256GB, Kingston SSDNow 16GB, Samsung 500GB 3" in casedock when needed, Chieftec Nitro88+ 650W, NZXT H2 White, 3x Asus VS248 24"
    Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
    Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)

  7. #7
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    Do you have the memory installed in the same colo slots?
    Currently the memory runs at single channel mode.
    The manual recommends to install the memory in the red slots for better overclocking.
    What was the BSOD error(s) you got?

    EDIT: you can try use memtest86+, though the problem is likely to be the settings not the memory itself.

  8. #8
    dJabba's Avatar
    dJabba is offline Member
    Join Date
    Sep 2010
    Location
    Denmark
    Posts
    295

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    I am using the 2 red slots (first black is blocked by CPU cooler), Slot 2 and 4. I was confused about the single channel output as well.

    About the blue screens .. can't remember the code numbers, but I got 3 minidump's on my hdd from yesterday if they can help. I got a digi image from one of my first bluescreens after I build the system though:

    STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA800846D910, 0xFFFFFA80846DBF9, 0xFFFFF800031D48B0).

    I will try memtest86+ later today - that was the freaking name i couldn't remember, so I used windows own tool .. hehe

    [edit]
    Just noticed the icon in tray for system alerts. Since all is updated I checked it and it's the report from the last crash:
    Code:
    Run Windows diagnostics to troubleshoot the problem
    Your computer might be encountering a memory problem. Memory problems are typically caused by hardware failures, such as a problem with random access memory (RAM). If this is a memory problem and it's not fixed, you might lose information, or your computer might stop working.
    
    To check for a memory problem, restart your computer. While restarting, Windows will test your computer's memory hardware components for problems and display the results. Choose one of the following options:
    so atleast it is now confirmed that it is the memory that causes my trouble.
    Last edited by dJabba; 09-15-2011 at 05:10 PM.
    My advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
    Whitey: ROG Crosshair V Formula/Thunderbolt, AMD 1090T @ 3.2GHz w. NZXT Havic 140, Corsair XMS3 1333 8GB kit, HIS IceQ X HD 6870, Corsair Force GT 120GB, OCZ Vertex4 256GB, Kingston SSDNow 16GB, Samsung 500GB 3" in casedock when needed, Chieftec Nitro88+ 650W, NZXT H2 White, 3x Asus VS248 24"
    Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
    Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)

  9. #9
    Chike is offline Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,531

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    STOP Error 0x000000F4: CRITICAL_OBJECT_TERMINATION
    STOP error 0xF4 means that a process or thread crucial to system operation has unexpectedly exited or been terminated. STOP code 0x000000F4 may also display "CRITICAL_OBJECT_TERMINATION" on the same STOP message.
    Never saw this one before, not very informative.

    I see CMZ8GX3M2A1866C9 memory modules are on the QVL list, and the board supposed to handle 4 of them.
    Does post screen also report single channel memory configuration? If it does try to ask at ASUS forums.

    When you select the memory with D.O.C.P, does it also changes the bclk and/or other parameters?

  10. #10
    dJabba's Avatar
    dJabba is offline Member
    Join Date
    Sep 2010
    Location
    Denmark
    Posts
    295

    Default Re: Need help with: ASUS Crosshair V Formula w. CMZ8GX3M2A1866C9 and 1090T.

    yea, the modules are on both Corsairs and ASUS QVL list and deemed compatible for 1,2 and 4 modules. Why it seemed like a safe buy to me.

    Having my arms and ears out in all directions atm. I got a thread over at the ASUS forum and I've contacted the shop I bought them at to see if i can exchange them to other modules instead.

    I've just downloaded memtest86+ and flashed one of my usb disks with it, so going to test that next.
    ---
    I'll have to clear up another USB stick so I can take screenshots from the BIOS as well. I think it reports them as single as well.
    When I eneable the DOCP it changes pretty much every voltage and speed to fit the OC profile. For now I got all that disabled and just want to get it to run at stock speed stable. If it doesn't run stable at stock, it sure wont run stable when OC'd.
    Last i tried I couldn't even get it to boot if i janked it up to the "normal setting" of 1600 that is the highest I can without enabling the DOCP.

    I'll report back when I get some results.
    My advice - never visit a short-url, no matter who gives it to you. You can't trust any source at any time when you don't know your target
    Whitey: ROG Crosshair V Formula/Thunderbolt, AMD 1090T @ 3.2GHz w. NZXT Havic 140, Corsair XMS3 1333 8GB kit, HIS IceQ X HD 6870, Corsair Force GT 120GB, OCZ Vertex4 256GB, Kingston SSDNow 16GB, Samsung 500GB 3" in casedock when needed, Chieftec Nitro88+ 650W, NZXT H2 White, 3x Asus VS248 24"
    Snuggles: Zotac Zbox HD-ID40 (Atom d525, worst purchase ever on cpu), Patriot Pyro 60GB (Thanks to Tweaktown Giveaway), 4GB 800' DDR2 SO-DIMM
    Bcube (NAS): ASUS F1A75-I Deluxe, AMD A6-3500 @ 2.1GHz, LSI 9240-8i (M1015) controller, GSkill Ares 1866 8GB blue kit, 4x Seagate SV35.5 2TB, 1x Seagate Barracuda 1.5TB, 1x Samsung HD103UJ, 1x Samsung F4 2TB, Temp. Rebel9 Alu case, Corsair H60, 2x Icy Dock MB973SP-B, NZXT UI01, Enermax T.B. Silence on docks and cpu, Aurum 500W gold PSU. (Draws 65W average, doesn't peak above 100W at any time)

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •