Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: O.C mushkin 1066mhz up to 1200 mhz




  1. #1
    Join Date
    May 2013
    Location
    romania
    Posts
    2

    Default O.C mushkin 1066mhz up to 1200 mhz

    Hey guys , i just want to make my mushkin to work at 1200mhz((360 x 8 )) but i have some problems they work only with multiplier 3.33D , il post some photo to see what i say. thanks
    Motherboard i have here
    Intel Q9400 here
    Memorii Mushkin 1066 mhz 2x 2gb dual channel

    My voltages are here




    Last edited by raptyle123; 05-29-2013 at 05:37 AM.

  2. #2
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: O.C mushkin 1066mhz up to 1200 mhz

    We need detailed information about ALL OF THE HARDWARE in your system.

    We can best help you after you create a detailed hardware list in the System Specs portion of your
    forum profile http://forums.tweaktown.com/profile.php?do=editprofile at the bottom of the
    profile page or in your forum signature http://forums.tweaktown.com/profile....=editsignature.
    Be sure to include brand names and model numbers.

    The D-memory strap is not stable when FSB is less than 400MHz
    You will have better results if you use the 3.20B memory multiplier.
    Your best real world performance will be when you use the highest stable FSB with a lower cpu multiplier.
    Instead of using your current 8 x 360 cpu settings for 2.88GHz, try 7 x 401MHz = 2.80GHz or 7 x 415 = 2.90GHz.
    MCH Core = 1.24 - 1.28 will be required with 2 x 2GB of memory.
    My Mushkin 996599 Blackline memory has been stable up to 1100MHz with 5-5-5-15 timings.
    I've been running it at 856MHz with 4-4-4-12 timings for years and it's real world performance is the same as using up to 1100MHz with looser 5-5-5-15 timings. DRAM Voltage = 2.02 volts works best for me.

    I've seen a couple of threads on the web where the system was stable at 1200MHz with 6-6-6-18 timings, but they had to do a lot of tweaking with clock skew and reference settings.

    My bottom line: 1200MHz is good for bragging rights only and does not offer better real world performance with P45 systems.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  3. #3
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: O.C mushkin 1066mhz up to 1200 mhz

    Your system will be more stable if you set PCI Express Frequency = 100 or 101MHz.
    CPU Vcore might need to be increased somewhat.
    Increasing CPU Termination often helps with stability, but it should be at least 0.05 - 0.10 volts lower than CPU Vcore when you are overclocking.
    Increasing CPU PLL to 1.58 might be required, but don't go any higher.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #4
    Join Date
    May 2013
    Location
    romania
    Posts
    2

    Default Re: O.C mushkin 1066mhz up to 1200 mhz

    Quote Originally Posted by profJim View Post
    Your system will be more stable if you set PCI Express Frequency = 100 or 101MHz.
    CPU Vcore might need to be increased somewhat.
    Increasing CPU Termination often helps with stability, but it should be at least 0.05 - 0.10 volts lower than CPU Vcore when you are overclocking.
    Increasing CPU PLL to 1.58 might be required, but don't go any higher.
    thanks for all , i will test tomorrow and il come with answer . thank you again

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •