Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: I've Lost My Direction




  1. #1

    Default

    Ok so I have not done this for awhile and I figure the easiest way would be to ask Whats a safe voltage increase for CPU & MEM & AGP and what are the average increases for my GF4 any help appriciated
    Visit my photochopped car site at

    ZTi

    INTERCEPTOR-XIV (so called because its the 14th incarnation duh) Consists of ;

    AMD Athlon XP 1600+/1400Mhz @ 1900+/1575Mhz (150Mhz FSB 1.750v)
    Jetway V333DA A KT333 Award Bios Revision A04 (VIA 4in1 4.43)
    A-Data 256MB DDR PC2100 (2.6v DIMM)
    ST Labs GeForce4 MX 440 64 MB DDR @ 285/435 (1.6v Detonator 40.72)
    VIA AC'97 Enhanced Audio (On Board)
    350W Eagle P4 Certified PSU
    80G Seagate Barracuda IV ST380021A 7200
    40G Western Digital Caviar WD400BB-32CLBO 7200
    10G Seagate U Series V ST310211A 5400
    MSI 48x16x48 CD/RW
    Banksia Wave SP 56 Dual PnP (External)
    3Com 10/100 NIC (Only Installed When Needed)
    Logitech cordless Freedom Optical Mouse, Keyboard and Wingman Game PAD
    WINXP PRO + SP1 300+Apps installed 120 odd Games Minor Glitches Occationally (Due to the 120MB Registry I guess) 3D Mark 6306

  2. #2
    Join Date
    Nov 2001
    Location
    Texas, USA
    Posts
    4,825

    Default

    Processor - 1.85v should be your maximum unless you get some high-end cooling in place (water, vapor, peltier).

    Memory - Default is 2.5v so you can take it to 2.7 or 2.8 without any problems. I'd go with some sort of active cooling if you decide to go higher.

    AGP - Depends on the AGP version you're using. AGP 2x uses a default 3.3v, AGP 4x uses 1.5v and AGP 8x uses 0.8v as default levels. A general rule is no more than 10% unless you aggressively cool the component. The MX440 card you have in your signature will probably be running at AGP 4x standards, so take it from there. As to the overclocking levels on that board,it has been too long since I played with one to be able to give a valid answer. The old Prolink model I tested some time ago was able to run nicely at 300/450, but depending on the memory used on yours, you may be able to get a good bit more out of it than I did.
    Old age and treachery will overcome youth and skill
    My Toys

  3. #3

    Default

    Thanks for the reply heres how Im going so far one teadeously slow step at a time
    AMD Athlon XP 1600+/1400Mhz @ 1800+/1533Mhz (140Mhz FSB 1.750v Vcore Temps CPU 44'c-52'c Case 32'c-36'c Ambient 28'c-33'c)
    Jetway V333DA A KT333 Award Bios Revision A04 (VIA 4in1 4.43)
    A-Data 256MB DDR PC2100 (2.6v DIMM)
    ST Labs GeForce4 MX 440 64 MB DDR @ AGP 4X 285/430 (1.6v Detonator 40.72)
    I was abel to raise my 3d mark score from 5423 to 6126
    oh and my AGP voltage does not go any higher than 1.6
    Visit my photochopped car site at

    ZTi

    INTERCEPTOR-XIV (so called because its the 14th incarnation duh) Consists of ;

    AMD Athlon XP 1600+/1400Mhz @ 1900+/1575Mhz (150Mhz FSB 1.750v)
    Jetway V333DA A KT333 Award Bios Revision A04 (VIA 4in1 4.43)
    A-Data 256MB DDR PC2100 (2.6v DIMM)
    ST Labs GeForce4 MX 440 64 MB DDR @ 285/435 (1.6v Detonator 40.72)
    VIA AC'97 Enhanced Audio (On Board)
    350W Eagle P4 Certified PSU
    80G Seagate Barracuda IV ST380021A 7200
    40G Western Digital Caviar WD400BB-32CLBO 7200
    10G Seagate U Series V ST310211A 5400
    MSI 48x16x48 CD/RW
    Banksia Wave SP 56 Dual PnP (External)
    3Com 10/100 NIC (Only Installed When Needed)
    Logitech cordless Freedom Optical Mouse, Keyboard and Wingman Game PAD
    WINXP PRO + SP1 300+Apps installed 120 odd Games Minor Glitches Occationally (Due to the 120MB Registry I guess) 3D Mark 6306

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •