Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: x5450 on ep43-s3l overclock help




  1. #1
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default x5450 on ep43-s3l overclock help

    Hello, im new here and i have a question about overclocking my x5450 on ep43-s3l, i managed to clock it to 3.9 GHz with 1.293 vcore. When i put the settings in bios for fsb and vcore and after i save it the computers beeps once and windows starts up, i do a prime95 test and it goes well, my temps are like 64-65 C with prime95. After i finish testing i restart the pc manually from the windows button and then Restart button, when windows log off and its time for the bios POST to come up, my computer restarts and the OC is on stock again. Here are some information and pictures.

    Everest report for overclock

    Code:
    Operating System                                  Windows 10 Pro Professional 6.2.9200
     Date                                              2016-05-03
     Time                                              23:32
    
    
    
    
    --------[ Overclock ]---------------------------------------------------------------------------------------------------
    
    
        CPU Properties:
          CPU Type                                          QuadCore Intel Xeon X5450
          CPU Alias                                         Harpertown
          CPU Stepping                                      E0
          Engineering Sample                                No
          CPUID CPU Name                                    Intel(R) Xeon(R) CPU X5450 @ 3.00GHz
          CPUID Revision                                    0001067Ah
          CPU VID                                           1.2875 V
    
    
        CPU Speed:
          CPU Clock                                         3906.0 MHz  (original: 3000 MHz, overclock: 30%)
          CPU Multiplier                                    9x
          CPU FSB                                           434.0 MHz  (original: 333 MHz, overclock: 30%)
          Memory Bus                                        434.0 MHz
          DRAM:FSB Ratio                                    1:1
    
    
        CPU Cache:
          L1 Code Cache                                     32 KB per core
          L1 Data Cache                                     32 KB per core
          L2 Cache                                          2x 6 MB  (On-Die, ECC, ASC, Full-Speed)
    
    
        Motherboard Properties:
          Motherboard ID                                    09/03/2009-P43-ICH10-7A89PG0MC-00
          Motherboard Name                                  Gigabyte GA-EP43-S3L  (2 PCI, 4 PCI-E x1, 1 PCI-E x16, 4 DDR2 DIMM, Audio, Gigabit LAN)
    
    
        Chipset Properties:
          Motherboard Chipset                               Intel Eaglelake P43
          Memory Timings                                    5-7-7-20  (CL-RCD-RP-RAS)
          Command Rate (CR)                                 2T
          DIMM1: Patriot Memory PSD22G80026                 2 GB DDR2-800 DDR2 SDRAM  (6-6-6-18 @ 400 MHz)  (5-5-5-15 @ 333 MHz)  (4-4-4-12 @ 266 MHz)
          DIMM3: A-Data ELQVE1B1615ZG                       2 GB DDR2-800 DDR2 SDRAM  (5-5-5-18 @ 400 MHz)  (4-4-4-12 @ 266 MHz)  (3-3-3-9 @ 200 MHz)
    
    
        BIOS Properties:
          System BIOS Date                                  09/03/09
          Video BIOS Date                                   12/09/13
          Award BIOS Type                                   Award Modular BIOS v6.00PG
          Award BIOS Message                                EP43-S3L F9c
          DMI BIOS Version                                  F9c
    CPU-Z






    Bios settings will be posted on the next post.
    Attached Images Attached Images x5450 on ep43-s3l overclock help-obtgare-png 

  2. #2
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default Re: x5450 on ep43-s3l overclock help

    Posting the bios settings
    Code:
    M.I.T
    Robust Graphics Booster-----------------------------------------[Auto]
    CPU Clock Ratio--------------------------------------------------[ 9x ]
    
    - Clock Chip Control
    
    CPU Host Clock Control-----------------------------------------[Enabled]
    CPU Host Frequency (Mhz)-------------------------------------[434]
    PCI Express Frequency (Mhz)----------------------------------[105]
    C.I.A.2-----------------------------------------------------------[Disabled]
    
    - Advaned Clock Control
    
    CPU Clock Drive------------------------------------------------[800mV]
    PCI Express Clock Drive---------------------------------------[800mV]
    CPU Clock Skew-------------------------------------------------[0ps]
    MCH Clock Skew------------------------------------------------[0ps]
    
    - DRAM Preformance Control
    
    Preformance Enhance-------------------------------------[Standard]
    (G)MCH Frequency Latch---------------------------------[Auto]
    System Memory Multiplier (SPD)------------------------[2.00D]
    Memory Frequency(Mhz)                    667                 868
    DRAM Timing Selectable (SPD)--------------------------[Manual]
    
    - Standard Timing Control
    
    CAS Latency Time------------------------------------5    [Auto]
    tRCD---------------------------------------------------5   [Auto]
    tRP-----------------------------------------------------5   [Auto]
    tRAS--------------------------------------------------15   [Auto]
    
    - Advanced Timing Control
    
    
    tRRD ---------------------------------------------3 [Auto]
    tWTR--------------------------------------------- 3 [Auto]
    tWR-----------------------------------------------5 [Auto]
    tRFC---------------------------------------------44 [Auto]
    tRTP----------------------------------------------3 [Auto]
    Command Rate(CMD)---------------------------0 [Auto]
    
    Channel A
    
    Channel A Timing Settings
    
    Static tRead Value---------------------------------------------9 [Auto]
    
    tRD Phase0 Adjustment---------------------------------------0 [Auto]
    tRD Phase1 Adjustment---------------------------------------0 [Auto]
    tRD Phase2 Adjustment---------------------------------------0 [Auto]
    tRD Phase3 Adjustment---------------------------------------0 [Auto]
    
    Trd2rd(Different Rank)----------------------------------------6 [Auto]
    Twr2wr(Different Rank)---------------------------------------6 [Auto]
    Twr2rd(Different Rank)--------------------------------------- 5 [Auto]
    Trd2wr(Same/Diff Rank)--------------------------------------8 [Auto]
    
    DIMM1 Clock Skew Control------------------------------------- [Auto]
    DIMM2 Clock Skew Control------------------------------------- [Auto]
    DDR Write Training---------------------------------------------- [Auto]
    
    Channel A Driving Settings
    
    Driving Strength Profile----------------------------------------- [Auto]
    
    Data  Driving Pull-Up Level------------------------------------- [Auto]
    Cmd  Driving Pull-Up Level------------------------------------- [Auto]
    Ctrl   Driving Pull-Up Level------------------------------------- [Auto]
    Clk    Driving Pull-Up Level------------------------------------- [Auto]
    
    Data Driving Pull-Down Level---------------------------------- [Auto]
    Cmd Driving Pull-Down Level---------------------------------- [Auto]
    Ctrl  Driving Pull-Down Level---------------------------------- [Auto]
    Clk   Driving Pull-Down Level---------------------------------- [Auto]
    
    Channel B
    
    Channel B Timing Settings
    
    Static tRead Value---------------------------------------------9 [Auto]
    
    tRD Phase0 Adjustment---------------------------------------0 [Auto]
    tRD Phase1 Adjustment---------------------------------------0 [Auto]
    tRD Phase2 Adjustment---------------------------------------0 [Auto]
    tRD Phase3 Adjustment---------------------------------------0 [Auto]
    
    Trd2rd(Different Rank)----------------------------------------6 [Auto]
    Twr2wr(Different Rank)---------------------------------------6 [Auto]
    Twr2rd(Different Rank)--------------------------------------- 5 [Auto]
    Trd2wr(Same/Diff Rank)--------------------------------------8 [Auto]
    
    DIMM1 Clock Skew Control------------------------------------- [Auto]
    DIMM2 Clock Skew Control------------------------------------- [Auto]
    DDR Write Training---------------------------------------------- [Auto]
    
    Channel B Driving Settings
    
    Driving Strength Profile---------------------------------------- [Auto]
    
    Data  Driving Pull-Up Level------------------------------------ [Auto]
    Cmd  Driving Pull-Up Level------------------------------------ [Auto]
    Ctrl   Driving Pull-Up Level------------------------------------ [Auto]
    Clk    Driving Pull-Up Level------------------------------------ [Auto]
    
    Data Driving Pull-Down Level---------------------------------- [Auto]
    Cmd Driving Pull-Down Level---------------------------------- [Auto]
    Ctrl  Driving Pull-Down Level---------------------------------- [Auto]
    Clk   Driving Pull-Down Level---------------------------------- [Auto]
    
    - Mother Board Voltage Control
    
    Voltages Types               Normal            Current
    
    CPU Vcore                      1.28750V        [1.29375V]
    CPU Termination             1.200V            [Auto]
    CPU PLL                         1.550V            [Auto]
    CPU Reference                0.805V            [Auto]
    
    MCH Core                       1.100V           [Auto]
    ICH I/O                          1.550V           [Auto]
    
    DRAM Voltage                1.800V            [Auto]
    
    
    This is from another TAB FROM THE BIOS
    Limit CPUID Max. to 3 --------------[Dsiabled]
    No-Execute Memory Protect --------[Enabled]
    CPU Enhanced Halt (C1E) ----------[Disabled]
    C2/C2E State Support --------------[Disabled]
    CPU Thermal Monitor 2(TM2)-------[Disabled]
    CPU EIST Function------------------[Disabled]
    Virtualization Technology-----------[Enabled]
    Last edited by BazeMK; 05-04-2016 at 07:34 PM. Reason: putting bios settings in code

  3. #3
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: x5450 on ep43-s3l overclock help

    Welcome to the forum.

    I'm impressed.....FSB = 434MHz and your system appears to be stable except when you reboot.

    I see that you've already viewed the http://forums.tweaktown.com/gigabyte...-pls-help.html thread where we said that EP43 motherboards usually can't overclock with FSB higher than about 415 - 425MHz.

    Change MCH Core voltage to 1.20 to see if this helps when rebooting.
    When this setting is too high or too low if can often cause boot loops or the overclocked bios settings might reset.
    We will cover testing with the 2.0B memory strap later.

    I have several suggestions but first I need to see what Memset shows for your memory settings and also what ET6 (EasyTune 6) reports for your applied voltage settings.
    Download:

    Post a screenshot that includes:
    • Memset using the SPD and ">>" tabs
    • cpu-z CPU and Mainboard screens (several instances can be run at the same time)
    • EasyTune6 --> TUNER tab --> ADVANCE tab --> VOLTAGE tab (only the Voltage tab is needed)
    • CoreTemp screen [for your cpu's VID (Voltage ID)]

    I only run ET6 to include the advanced voltage settings in a screenshot and I always close ET6 before I run any stress tests or intensive applications. I recommend that you don't enable ET6 to autostart with Windows.

    Check out Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock where Luke started with an P35-DS3L and later upgraded to an EP45-UD3P with 8GB of memory with his Xeon processors.

    I do not have LLC (Load Line Calibration) enabled in my systems.

    It's easier for us to review your bios settings when you select/highlight the bios template and click on the # button to wrap the settings in a code section.

    Code:
    Motherboard: Model:  Rev#:  Bios Version:
    Cpu: Model
    Ram: Brand, Model/Part#, Link to your ram's specs
    Power Supply Unit: Brand, Model#, Wattage
    
    Default settings for new setups that are not overclocked.
    
    note: replace all ?? with the value displayed in your bios.
    ----> Replace "Auto" with manually set values.
    
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------- : [Auto] 
    CPU Clock Ratio ---------------- : [##]
    Fine CPU Clock Ratio ----------- : [0.0] 
    CPU Frequency -------------- : ####
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------- : [Enabled]
    CPU Host Frequency (Mhz) ------- : [Mhz]
    PCI Express Frequency (Mhz) ---- : [Auto] 
    C.I.A.2 ------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------- : ??? 
    PCI Express Clock Drive -------- : ???
    CPU Clock Skew (ps) ------------ : ???
    MCH Clock Skew (ps) ------------ : ???
    DRAM Performance Control
    Performance Enhance ------------ : [Turbo] 
    Extreme Memory Profile - (XMP) - : [Disabled] 
    (G)MCH Frequency Latch --------- : [Auto]
    System Memory Multiplier ------- : [Auto]
    Memory Frequency (Mhz) --------- : [Auto]
    DRAM Timing Selectable --------- : [Auto] 
    Standard Timing Control
    CAS Latency Time ------- ?? ---- : [Auto]
    tRCD  ------------------ ?? ---- : [Auto]
    tRP -------------------- ?? ---- : [Auto]
    tRAS  ------------------ ?? ---- : [Auto]
    Advanced Timing Control
    tRRD  ------------------ ?? ---- : [Auto]
    tWTR  ------------------ ?? ---- : [Auto]
    tWR -------------------- ?? ---- : [Auto]
    tRFC  ------------------ ?? ---- : [Auto]
    tRTP  ------------------ ?? ---- : [Auto]
    Command Rate (CMD) ------------- : [Auto] 
    Channel A Timing Settings -- {Press Enter to change settings}
    Static tRead Value ------------- : [Auto]
    tRD Phase0 Adjustment ---------- : [Auto] 
    tRD Phase1 Adjustment ---------- : [Auto]
    tRD Phase2 Adjustment ---------- : [Auto]
    tRD Phase3 Adjustment ---------- : [Auto]
    Trd2rd(Different Rank) --------- : [Auto]
    Twr2wr(Different Rank) --------- : [Auto]
    Twr2rd(Different Rank) --------- : [Auto]
    Trd2wr(Same/Diff Rank) --------- : [Auto]
    Dimm1 Clock Skew Control ------- : [Auto]  ps
    Dimm2 Clock Skew Control ------- : [Auto]  ps
    Channel B Timing Settings -- {Press Enter to change settings}
    Static tRead Value ------------- : [Auto]
    tRD Phase0 Adjustment ---------- : [Auto] 
    tRD Phase1 Adjustment ---------- : [Auto]
    tRD Phase2 Adjustment ---------- : [Auto]
    tRD Phase3 Adjustment ---------- : [Auto]
    Trd2rd(Different Rank) --------- : [Auto]
    Twr2wr(Different Rank) --------- : [Auto]
    Twr2rd(Different Rank) --------- : [Auto]
    Trd2wr(Same/Diff Rank) --------- : [Auto]
    Dimm1 Clock Skew Control ------- : [Auto]  ps
    Dimm2 Clock Skew Control ------- : [Auto]  ps
    Channel A and B Driving Settings ------ {Press Enter to change settings}
    Driving Strength Profile ------- : [Auto] 			<-- setting for channel A
    Driving Strength Profile ------- : [Auto] 			<-- setting for channel B
    Motherboard Voltage Control
    CPU
    Voltage Types--------- Normal ----- Current -----
    Load-Line Calibration ---------- : [Disabled]
    CPU Vcore ----------- 1.????? -- : [Auto] 
    CPU Termination ----- 1.200V* -- : [Auto] 
    CPU PLL ------------- 1.500V* -- : [Auto] 	
    CPU Reference ------- 0.755V* -- : [Auto] 
    CPU Reference2 ------ 0.800V* -- : [Auto] 
    MCH/ICH
    MCH Core ------------- 1.100V -- : [Auto] 
    MCH Reference -------- 0.800V -- : [Auto]
    MCH/DRAM Ref --------- 0.900V -- : [Auto]
    ICH I/O -------------- 1.500V -- : [Auto] 
    ICH Core ------------- 1.100V -- : [Auto] 
    DRAM
    DRAM Voltage --------- 1.800V -- : [Auto] 
    DRAM Termination ----- 0.900V -- : [Auto]
    Channel A Reference -- 0.900V -- : [Auto]
    Channel B Reference -- 0.900V -- : [Auto]
    Advanced Settings
    Limit CPUID Max. to 3 ---------- : [Disabled]
    No-Execute Memory Protect ------ : [Enabled]
    CPU Enhanced Halt (C1E) -------- : [Disabled]
    C2/C2E State Support ----------- : [Disabled]
    x C4/C4E State Support --------- : [Disabled]
    CPU Thermal Monitor 2 (TM2) ---- : [Enabled]
    CPU EIST Function  ------------- : [Disabled]
    Virtualization Technology ------ : [Disabled] 
    Integrated Peripherals
    Legacy USB Storage Detect  ----- : [Enabled]
    Stress Testing
    • LinX or IBT (IntelBurnTest) CPU core temperatures will be about 10o(C) higher than Prime95 temperatures.
    • I like to run LinX as a preliminary stress test before I run and of the Prime95 tests where I run each Prime95 test (Blend, Small FFT or Large FFT) for at least 8 hours.
    • If LinX or IBT has errors, your system is not stable.
    • Many times LinX or IBT do not have errors but an extended Prime95 test can have errors, sometimes very quickly and often after 3 - 6 hours.
    • I never run LinX or IBT for longer than 15 - 25 minutes.


    Here's an example of one of my all-in-one screenshots:

    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #4
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default Re: x5450 on ep43-s3l overclock help

    Thanks profJim for the replay. Changed the previous post with CODE wraped bios settings. Changing the bios information that u mentioned with ??? and the values.

    Changed the MCH Core to 1.200 the system boot (as usual like before, we will see on next restart)

    After installing ET6 i had to restart my pc and boom, the bios oc reseted again, boot loops.
    Entered bios again and set the settings again, but now getting bios boot loops cant boot into windows without restarting the bios oc settings. I set 1.300 to vcore and the windows boot.

    Here are some screenshots:













    I screenshoted whole HWInfo, just in case :D
    Here is a screenshot from the IBT test on Standard.



    Code:
    ----------------------------IntelBurnTest v2.54
    Created by AgentGOD
    ----------------------------
    
    
    Processor: Intel(R) Xeon(R) CPU           X5450  @ 3.00GHz
    Clock Speed: 3,96 GHz
    Active Physical Cores: 4
    Total System Memory: 4094 MB
    
    
    Stress Level: Standard (1024 MB)
    Testing started on 04.5.2016 14:23:46
    Time (s)        Speed (GFlops)        Result
    [14:24:11] 18.691    47.8245            2.073543e-001
    [14:24:36] 18.563    48.1546            3.254830e+008
    Testing ended on 04.5.2016 14:24:36
    Test Result: Failure.
    ----------------------------
    I think i need to put a better thermal paste on my cpu and change the location on my PC, atm is in a hole, between my pc desk and another desk, with the air holes facing the wall. Also forgot to mention im using air cooling, gonna open the PC change thermal paste with the best i have DeepCool Z3 (Atm i have thermal paste for transistors, the white one) whole i wait for your replay. Also forgot to mention, when i finished all that screenshots and testing, i restarted the pc and OC bios reset again. Waiting for a replay. Gonna change those ??? and [Auto] setting in bios u mention above on my 2nd post on this thread.

  5. #5
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: x5450 on ep43-s3l overclock help

    STOP RIGHT NOW, CPU PLL = 1.75000V IS DANGEROUSLY HIGH!!!

    Go into the bios immediately and manually set CPU PLL to 1.59 or lower, don't leave it set to AUTO with moderate or high overclocks.


    I'll look at the rest of your post later today.

    Read about saving and loading bios profiles in the bios section of your motherboard user manual so that it is quicker and easier for you to reload a saved bios profile and then make some minor changes before you save bios settings and exit the bios.

    Manually set Static tRead Value to 10 for each memory channel.
    Memset reports Performance Level (aka tRD or Static tRead Value) as zero and your memory performance is poor.
    tRD = 10 is very conservative (and safe) and this will be tweaked later.

    What is the highest FSB overclock where your system did not reset the bios when you shut down your system or did a warm boot?
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  6. #6
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default Re: x5450 on ep43-s3l overclock help

    Sorry for late response on the Bios settings. 3.70Ghz was the max i get without bios resets. Cant remember what was the vcore but i guess it was the normal one or abit less.

    Code:
    MB Intelligent Tweaker(M.I.T.)
    Robust Graphics Booster -------- : [Auto] [Fast] [Turbo]
    CPU Clock Ratio ---------------- : [9 x] 6 min - 9 max
    Fine CPU Clock Ratio ----------- : [0.0] 
    CPU Frequency -------------- : 3.90Ghz (434x9)
    Clock Chip Control
    Standard Clock Control
    CPU Host Clock Control --------- : [Enabled]
    CPU Host Frequency (Mhz) ------- : [434]
    PCI Express Frequency (Mhz) ---- : [105] 
    C.I.A.2 ------------------------ : [Disabled]
    Advanced Clock Control ------- [Press Enter]
    CPU Clock Drive ---------------- : [800mV] from 700mV to 1000mV it goes
    PCI Express Clock Drive -------- : [800mV] from 700mV to 1000mV it goes
    CPU Clock Skew (ps) ------------ : [ 0ps ] from 0ps to 750ps it goes
    MCH Clock Skew (ps) ------------ : [ 0ps ] from 0ps to 750ps it goes
    DRAM Performance Control
    Performance Enhance ------------ : [Standard] [Turbo] [Extreme] (1st one is what im using atm) 
    Extreme Memory Profile - (XMP) - : [Disabled] <---dont have this
    (G)MCH Frequency Latch --------- : [Auto] 266,200,333,400mhz thats what i have there but its auto atm
    System Memory Multiplier ------- : [2.00D] <--- have much more here
    Memory Frequency (Mhz) --------- : 667    868 <--- this is gray space, i cant change nothing here, 868 is incresing when i up the FSB
    DRAM Timing Selectable --------- : [Manual] 
    Standard Timing Control
    CAS Latency Time ------- 5 ---- : [5]
    tRCD  ------------------ 5 ---- : [5]
    tRP -------------------- 5 ---- : [5]
    tRAS  ------------------ 15 ---- : [5]
    Advanced Timing Control
    tRRD  ------------------ 3 ---- : [Auto] min 0 max 15
    tWTR  ------------------ 3 ---- : [Auto] min 0 max 31
    tWR -------------------- 5 ---- : [Auto] min 0 max 31
    tRFC  ------------------ 44 ---- : [Auto] min 0 max 255
    tRTP  ------------------ 3 ---- : [Auto] min 0 max 15
    Command Rate (CMD) --------0----- : [Auto]  ( min 0 max 3 )
    Channel A Timing Settings -- {Press Enter to change settings}
    Static tRead Value --------8----- : [Auto]    ( min 0 max 15 )
    tRD Phase0 Adjustment -----0----- : [Auto] ( 0-normal and 1-Advanced )
    tRD Phase1 Adjustment ------0---- : [Auto] ( 0-normal and 1-Advanced )
    tRD Phase2 Adjustment -------0--- : [Auto] ( 0-normal and 1-Advanced )
    tRD Phase3 Adjustment ------0---- : [Auto] ( 0-normal and 1-Advanced )
    Trd2rd(Different Rank) -----6---- : [Auto] ( min 0 max 15 )
    Twr2wr(Different Rank) -----6---- : [Auto] ( min 0 max 15 )
    Twr2rd(Different Rank) ------5--- : [Auto] ( min 0 max 15 )
    Trd2wr(Same/Diff Rank) ----8----- : [Auto] ( min 0 max 15 )
    Dimm1 Clock Skew Control ------- : [Auto]  ps  (it goes from +100 to +800 and then -100 to -700 ps)
    Dimm2 Clock Skew Control ------- : [Auto]  ps  (it goes from +100 to +800 and then -100 to -700 ps)
    Channel B Timing Settings -- {Press Enter to change settings}
    Static tRead Value ---------9---- : [Auto] ( min 0 max 15 )
    tRD Phase0 Adjustment ----0------ : [Auto]  ( 0-normal and 1-Advanced )
    tRD Phase1 Adjustment -----0----- : [Auto] ( 0-normal and 1-Advanced )
    tRD Phase2 Adjustment ------0---- : [Auto] ( 0-normal and 1-Advanced )
    tRD Phase3 Adjustment -------0--- : [Auto] ( 0-normal and 1-Advanced )
    Trd2rd(Different Rank) -----6---- : [Auto] ( min 0 max 15 )
    Twr2wr(Different Rank) ----6----- : [Auto] ( min 0 max 15 )
    Twr2rd(Different Rank) -----5---- : [Auto] ( min 0 max 15 )
    Trd2wr(Same/Diff Rank) ----8----- : [Auto] ( min 0 max 15 )
    Dimm1 Clock Skew Control ------- : [Auto]  ps (it goes from +100 to +800 and then -100 to -700 ps)
    Dimm2 Clock Skew Control ------- : [Auto]  ps (it goes from +100 to +800 and then -100 to -700 ps)
    Channel A and B Driving Settings ------ {Press Enter to change settings}
    Driving Strength Profile ------ : [Auto]667,800,1066,OC-1200,OC-1333 those are the settings but its on AUTO(channel A)
    Driving Strength Profile ------ : [Auto]667,800,1066,OC-1200,OC-1333 those are the settings but its on AUTO(channel B)
    Motherboard Voltage Control
    CPU
    Voltage Types--------- Normal ----- Current -----
    Load-Line Calibration ---------- : [Disabled] <--- dont have this
    CPU Vcore ----------- 1.28750V -- : [1.30000V] 
    CPU Termination ----- 1.200V -- : [Auto] Auto,Normal,1.050,1.100,1.150,1.200,1.300,1.400,1.500 have those its on auto
    CPU PLL ------------- 1.550V -- : [Auto] Auto,Normal,1.550,1.650,1.750,1.850V have those its on 1.550V
    CPU Reference ------- 0.805V -- : [Auto] Auto,Normal,0.744,0.762,0.785,0.805V have those its on Auto
    CPU Reference2 ------ 0.800V* -- : [Auto] <---- dont have this 
    MCH/ICH
    MCH Core ------------- 1.100V -- : [1.200V] Auto,Normal,1.000,1.100,1.200,1.300,1.400V have those its on 1.200V
    MCH Reference -------- 0.800V -- : [Auto] <----dont have this
    MCH/DRAM Ref --------- 0.900V -- : [Auto] <-----dont have this
    ICH I/O -------------- 1.550V -- : [Auto] Auto,Normal,1.550,1.650,1.750,1.850V have those its on auto
    ICH Core ------------- 1.100V -- : [Auto]<--------dont have this 
    DRAM
    DRAM Voltage --------- 1.800V -- : [Auto] Auto,Normal,1.800,1.900,2.000,2.100,2.200,2.300,2.400,2.500V have those its on auto
    DRAM Termination ----- 0.900V -- : [Auto] <------dont have this
    Channel A Reference -- 0.900V -- : [Auto] <------ dont have this
    Channel B Reference -- 0.900V -- : [Auto] <------ dont have this
    Advanced Settings
    Limit CPUID Max. to 3 ---------- : [Disabled]
    No-Execute Memory Protect ------ : [Enabled]
    CPU Enhanced Halt (C1E) -------- : [Disabled]
    C2/C2E State Support ----------- : [Disabled]
    x C4/C4E State Support --------- : [Disabled] <-------- dont have this
    CPU Thermal Monitor 2 (TM2) ---- : [Enabled] <---- was disabled now its enabled
    CPU EIST Function  ------------- : [Disabled]
    Virtualization Technology ------ : [Disabled] <---------- was enabled now its disabled
    Integrated Peripherals
    Legacy USB Storage Detect  ----- : [Enabled]
    Last edited by BazeMK; 05-04-2016 at 09:20 PM.

  7. #7
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: x5450 on ep43-s3l overclock help

    In Luke's Xeon thread we found that keeping cpu core temperatures at a reasonable level was an ongoing challenge.

    Using my Q9550 settings as an example, my Vcore is set to 1.39375, but when my system is loaded when stress testing, the Vcore averaged 1.284.

    You need to lower your FSB and raise your Vcore to get your system stable.

    PCI Express Frequency = 105 might be part of the problem too, set it to 101, the default setting is 100.

    Some motherboard models respond well with PCI Express Frequency somewhat higher than 100 but I don't remember seeing this with Gigabyte LGA775 motherboards.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  8. #8
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default Re: x5450 on ep43-s3l overclock help

    Learning how to save profiles, i will post the bios settings again when i save them to USB, and by the way i rise vcore and lowered FSB, when i post the bios settings i will tell u if the system is stable or not. Be right back.

  9. #9
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default Re: x5450 on ep43-s3l overclock help

    Okaayyy, just a quick question, im saving the bios to my USB, but when i open it with notepad it shows symbols and hieroglyphics any suggestions?

  10. #10
    BazeMK's Avatar
    BazeMK is offline Junior Member
    Join Date
    May 2016
    Location
    Macedonia
    Posts
    27

    Default Re: x5450 on ep43-s3l overclock help

    CPU FSP at 423
    Vcore at 1.3500V
    No other settings changed exept PCI-E to 101
    The 1st time it boots to windows with that clock, IBT not stable test, and when i restart the bios resets again.

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •