Hello all,

I've finished overclocking my new system and now have settled for 4.5GHz which is rock stable.

My settings are as follows:

(BIOS Ver 1902)

AI Tweaker:

AI overclock Tuner = Xmp
BCLK Freq = 100.00
ASUS Multicore Enhancement = Auto
CPU Core Ratio = Sync all Cores
1-Core Ratio = 45
DDR Freq = DDR4-2400 MHz
TPU = Keep Current

AI Tweaker/DIGI+ VRM:

CPU Load-Line Calibration = Level 6
CPU Power Phase Control = Optimised

AI Tweaker:

CPU Core/Cache Current Limit Max = 255.50
Min Cache Ratio = 45
Max Cache Ratio = 45
CPU Core/Cache Voltage = Manual Mode
- CPU Core Voltage Override = 1.260

All other values are set = Default or Auto

Real Temp GT 3.70 used to record temps.

Idle temps are 21 - 24


Full load temps of 68 - 71 while running P95 v28.9 build 2 for over 5 hours using the following to achieve maximum heat production:

Set the Min FFT and Max FFT size to 8 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref


Tested the stability of my overclock by using the following settings which was over 9 hours (while I was at work):

Set the Min FFT and Max FFT size to 1344 and checked Run FFTs in-place. Also set 15 minutes to run each FFT. Ref


I welcome any and all advice you may have in regards to the above and some help in overclocking my RAM.

cheers

worf105 <!-- / message --><!-- edit note --><strike></strike>