Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: x5460 in 2019




  1. #1
    myrashka is offline Junior Member
    Join Date
    Jul 2019
    Location
    russia
    Posts
    2

    Red face x5460 in 2019

    x5460 in 2019-12-jpg Hello to all! I am writing from Russia! I have a x5460 processor and above 3.8 I can not overclock as I have no experience! masters of the forum and experienced overclockers please help
    Last edited by myrashka; 07-07-2019 at 06:17 PM.

  2. #2
    Chike is online now Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,616

    Default Re: x5460 in 2019

    The chipset shown in MemSet is P45 but manual says it's a P43, whic hone is it?

    As far as I recall my P43 board did not boot at above 411MHz, and could have made stable at 406MHz, if it is P43 you at or near it's limit.

    Attach a text report of CPU-Z to your next post, will give a better picture on your setup.
    Last edited by Chike; 07-10-2019 at 09:44 AM.

  3. #3
    myrashka is offline Junior Member
    Join Date
    Jul 2019
    Location
    russia
    Posts
    2

    Default Re: x5460 in 2019

    Quote Originally Posted by Chike View Post
    The chipset shown in MemSet is P45 but manual says it's a P43, whic hone is it?

    As far as I recall my P43 board did not boot at above 411MHz, and could have made stable at 406MHz, if it is P43 you at or near it's limit.

    Attach a text report of CPU-Z to your next post, will give a better picture on your setup.
    DESKTOP-H595VTU.txt

  4. #4
    Chike is online now Senior Member
    Join Date
    Jun 2009
    Location
    Israel
    Posts
    6,616

    Default Re: x5460 in 2019

    CPU-Z can't tell either so it must be P43 according to the manual and 3.8GHz is about the maximum you can get.

    I see VIN1 is 1.71v, I am guessing it is the memory voltage, considering the amount of memory you are using and the fact you are mixing 2 different modules it may be a good idea to get t o at least 1.8v.

    As for FSB termination, no default value is shown in BIOS. Manual states it is set to 1.1v when a 45nm processor is installed, and Intel's documentation says it should be 1.1v for this CPU, however for E8000/E7000 CPUs documentation says it should be 1.2v for Intel 4 serieschipsets, and 1.1v for Intel 3 series chipsets (e.g. P35).
    It may be VIN6, try to see with HWiNFO (sensors).

  5. #5
    Join Date
    Sep 2007
    Location
    Minnesnowda
    Posts
    234

    Default Re: x5460 in 2019

    P43 chip set,
    Overclocking depends on the cooler your using for the CPU? Better cooling equals more volts, higher overclocks. ON a good air cooler with good ambient temps, depending on the chip and board you should be able to go around 4Ghz.
    MSI X-99SLI
    Intel 5930K WATER
    EVGA Nilla 1080
    POWER!



    http://www.3dmark.com/3dmv/5003339

    I did this> :) Default RMA discussion banned

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •