Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: FInally OC'ed my xp2100




  1. #1
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    I got the FSB up to 140, my cpu freq. is 1820mhz....downside is my temp is 55C under use...im gonna try to get some pc150 sdram and get a thermaltake 7+

    If you have any other suggestions plz tell me..

    (I used CPUFSB to do it)

  2. #2
    Join Date
    Oct 2002
    Posts
    251

    Default

    I'll post Wiggos reply for him... it worked for me.

    Make sure the bend in the clip is centered over the .....brain fart over the raise portion of the chip, where you put the compound.... I swear... I didn't drink too much for lunch today :thumb:
    Architectural Visualization Specialist

  3. #3
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    I just took my side panel off........there was a few psu wires blocking one side of the hs

  4. #4
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    what would be the best spot to put it?

  5. #5
    Join Date
    Nov 2001
    Location
    New England Highlands, Australia
    Posts
    21,907

    Default

    Not much a 40mm fan will do unless it's coolin' a chip such as northbridge or video. ;)

    But those temps if correct are too high. :(
    <center>:cheers:</center>

  6. #6
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    I just put in a 120mm exhaust........ive already got an 80mm intake and im getting another one tonight...or im gonna get a hdd cooler. temp under load is now 48C, but when i reboot bios says its only 44C

  7. #7
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    post the true speeds of amd athlon xp's.......i couldnt find it, and i wanna see what mine is around after i oc'ed it........also my pc133 is probably whats holding me from 150fsb isnt it?,,,,,if i got pc150, would it help?

  8. #8
    Join Date
    Feb 2003
    Posts
    15

    Default

    Have the Pc Chips 810LMR with AMD 2000+

    When I tried to use CPUFSB ?? to change the bus, it said the .PLL file could either be found or saved.

    What did you do different other than install, choose MB and type then jack it up to 140? Tried to get the frequency, tried to save it, just about every other button.

    No luck????

    :bounce:

    Thanks
    Chas

  9. #9
    Join Date
    Feb 2003
    Location
    Fincastle, IN, USA
    Posts
    3,776

    Default

    Also, there 2pll's for the m810.......ICS 94208 or ICS 9248-136

  10. #10
    Join Date
    Jun 2002
    Posts
    100

    Default

    I had (or still have) the same problem with my 2100+ i can only go to 140 b4 it becomes unstable I tried changing voltages on ram and cpu no effect , my temp was the same at 55c the only with pc-133 i then got 2700 ram and still the same problem. I don't know if the heat is the main problem but i'm pretty sure that its the motherboard, some boards like my A7A266-E just can't handle going too far past default .... unless im totally wrong and someone else can solve the problem for us :p

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •